Installation Instructions

ManualsBrandsShelterLogic ManualsCanopiesMax All-Purpose 6-Leg 10' x 20' Canopy

05_31757_0CPage 1

10' x 20' ALL-PURPOSE CANOPY

Assembly Instructions

1-800-524-9970

1-800-559-6175

Canada:

DESCRIPTION MODEL #

10' x 20' All-Purpose Canopy - 6 Leg - White

31757

Before you start: 2+ individual recommended for assembly, approximate time 2 hr.

Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored.

THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE.

RECOMMENDED TOOLS

12/23/10

Summary of content (5 pages)

PAGE 1
0' x 20' ALL-PURPOSE CANOPY Assembly Instructions Description 10' x 20' All-Purpose Canopy - 6 Leg - White Model # 31757 Recommended Tools Please read instructions COMPLETELY before assembly. This shelter MUST be securely anchored. THIS IS A TEMPORARY STRUCTURE AND NOT RECOMMENDED AS A PERMANENT STRUCTURE. Before you start: 2+ individual recommended for assembly, approximate time 2 hr.
PAGE 2
ATTENTION: This shelter product is manufactured with quality materials. It is designed to fit the ShelterLogic®, LLC custom fabric cover included. ShelterLogic®, LLC Shelters offer storage and protection from damage caused by sun, light rain, tree sap and animal - bird excrement. Please anchor this ShelterLogic®, LLC structure properly. See manual for more anchoring details. Proper anchoring, keeping cover tight and free of snow and debris is the responsibility of the consumer.
PAGE 3
10' x 20' All-Purpose Canopy - 6 Leg - Parts List - Model #31757 Quantity Part # 6 13104 24 13103 6 13106 Leg Poles 39 in. 6 13105 3 - Way Frame Connectors 6 13101 4 - Way Frame Connectors 3 13102 Bungee Cords 24 10066 Canopy Cover 1 802772 Base Feet 6 10075 Anchors 4 10431 Rope 40 ft. 1 10432 Description of Parts: Rafter Poles, Swedge Poles, Swedge Cross Poles 24 3/8 in. 40 11/16 in. 40 11/16 in. 1.
PAGE 4
2. ASSEMBLE ROOF FRAME Swedged Tubes Connections NOTE: Swedged tubes insert into plain ends at the crimp marks. 3. Assemble Legs & Attach to Roof Frame 13104 13103 Leg Pole Assembly Attach all legs to one side first. Let the other side of roof frame rest on the ground. Repeat for opposite side. 13105 13103 10075 4. Anchor THE FRAME Insert the (4) Anchor pins into the ground and tie ropes from the anchors to the corner tees as shown below. These are temporary spike anchors.
PAGE 5
. Place Cover and secure to CANOPY Frame A. Place cover over assembled roof frame with grommet panels facing down, aligned with cross rails. B. Make sure the cover is properly aligned on the frame, secure the four corners of the cover with bungees (10066) to the frame first. Attach remaining bungees. Re-adjust bungees position along cross pole as needed to ensure a tight and even fit of the cover to the frame.