Robot Vacuum RV1000 Series OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. WARNING To reduce the risk of fire, electric shock, injury, or property damage: GENERAL WARNINGS When using an electrical appliance, basic precautions should always be followed, including the following: 1.
GETTING TO KNOW YOUR SHARK IQ ROBOT™ GETTING TO KNOW YOUR SHARK IQ ROBOT Charge Indicator Lights Error Indicator Light Wi-Fi Indicator Light Front Bumper Clean Button Dock Button Navigation Module FRONT Charging Dock Charging Contact Charging Contact Power Button Dust Bin Release Button BACK Cliff and Boundary Sensors Charging Dock Side Brush Battery Door Charging Contact Front Caster Wheel Charger Cord Wrap Self-Cleaning Brushroll Drive Wheel Brushroll Door Dust Bin and Filter s h a r kc
DOCK SETUP CHARGING IMPORTANT: The Shark IQ Robot™ has a pre-installed rechargeable battery. Battery should be fully charged before using. It may take up to 5 hours to fully charge. 3 ft. 3 ft. 5 ft. NOTE: Select a permanent location for the Charging Dock, because every time you relocate it, your robot will have to completely re-map your house. NOTE: For best results, set up on hard floor or thin carpet. NOTE: Do not place dock against baseboards, heating elements, or in direct sunlight.
CHARGE INDICATOR LIGHTS BUTTONS AND INDICATOR LIGHTS CHARGE INDICATOR LIGHTS Display the amount of charge remaining in the battery. In Use Full Charge (Blue) Partial Charge (Blue) Low Charge (Red) ! While Charging (Blue) “!” ERROR INDICATOR No Charge or Off See Troubleshooting section for full list of error codes. WI-FI INDICATOR Blue light: connected to Wi-Fi. The blue indicator lights on the robot show how much charge is remaining. CLEAN BUTTON Red light: not connected.
PREP YOUR HOME USING THE SHARK IQ ROBOT™ Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly maintained.
USING THE SHARK IQ ROBOT™ MAINTENANCE Please visit sharkclean.com/app or call 1-888-228-5531 for answers to all your app questions. USING THE SHARK CLEAN™ APP AND VOICE CONTROLS CAUTION: Turn off power before performing any maintenance. Get the most out of your Shark IQ Robot™ with these app features: OPTIONS EDIT Kitchen EMPTYING THE DUST BIN •C ontrol From Anywhere Wherever you are, you’re in control of your robot.
MAINTENANCE MAINTENANCE CLEANING AND REPLACING THE FILTER SELF-CLEANING BRUSHROLL For optimal suction power, regularly clean and replace the filter inside the robot's dust bin. See sharkaccessories.com for replacement filters. The Self-Cleaning Brushroll actively removes hair wrap while your robot cleans. If some debris remains wrapped around the brushroll, continue cleaning to allow the brushroll to clean itself. IMPORTANT: DO NOT use water when cleaning the filter. Remove and empty the dust bin.
MAINTENANCE MAINTENANCE CLEANING SENSORS AND CHARGING PADS CLEANING THE WHEELS CLEAN SENSORS AND CHARGING PADS AS NEEDED. With a dry cloth, gently dust off the sensors and pads located on the bottom of the robot and on the dock. IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when they are dirty. For best results, clean sensors regularly. CLEANING SIDE BRUSHES REMOVE AND CLEAN FRONT WHEEL PERIODICALLY.
REPLACEMENT PARTS MAINTENANCE CAUTION: Turn off power before performing any maintenance. TROUBLESHOOTING Filter RVFFK950 Robot Dust Bin 100KY1000 Brushroll 103KY1000 Battery RVBAT850 If any error lights are illuminated or flashing on your Shark IQ Robot™, see the error code chart below: ERROR CODE Brushroll Door 109KY1000 Front Caster Wheel 1156FK950 Side Brushes 102KY1000 NOTE: To order replacement parts and filters, visit sharkaccessories.com. s h a r kc l e a n .
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement between You (either a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications, including those installed by You onto your Shark
REGISTER YOUR PURCHASE registeryourshark.com ONE (1) YEAR LIMITED WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
FCC WARNINGS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to parts 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and accordance with the instructions, may cause harmful interference to radio communications.
