Dimensions Guide

CONDENSATE PUMPS - SPECIFICATION SHEET
© SFA Saniflo Inc.
TECHNICAL SPECIFICATIONS
The Sanicondens Best is a pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc.
The Sanicondens Best will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack.
Discharges the condensate waste through a
3
⁄8" vinyl tube. A non-return valve is included on the discharge connection provided with the
system.
Comes with provisions for a ready-to-wire connection to an external overflow switch that will shut down the appliance or alert the consumer
in the event of overflow. It also includes all necessary hardware for ease of installation; 20 ft. of vinyl tubing, inlet adapter, discharge
adapter.
Discharges condensate from a condensing boiler or other condensate producing fixtures.
The condensate will drain into the system via four 1" inlets located on top of the enclosure.
Comes equipped with a built-in neutralizer to raise pH levels for harsh HVAC applications. Neutralizing granules come included with the
condensate pump.
Pump type: Condensate pump
Electrical: 120 V – 60 Hz / 1.5 Amps (Max)
Motor: 1/30 HP oil-filled thermally protected motor
Operating Temperature: 160°F Max.
Power cord length: 61
1
⁄2 inches
Noise level: ≤ 44 dBA (Lp) (measured at 3 ft.)
CONDENSATE PUMP/NEUTRALIZE
R
SANICONDENS BEST • PART NO. 041