Instruction Manual

Evoke® SCS System User Manual
D101706 Rev 2.01 10 Jan 2022 Page 30 of 59
8.1 Charger buttons and Indicators.
Start Charging button.
Place the Charger coil over the implant.
Press the ‘Start Charging’ button for more than 1 second to begin
charging.
Charging Link indicator.
The ‘Charging Link’ indicator shows the quality of the link
between the Charger coil and the CLS.
No charging
possible.
Charger will
beep every
second.
Marginal
alignment.
Charging
possible but
may take
longer.
Acceptable
alignment for
charging.
Charger will
beep once if
the coil
alignment
falls below
this quality.
Ideal
alignment for
charging.
Note: To improve the quality of the link between the Charger coil
and the Evoke CLS, move the coil closer to the implant.
Charger Battery Level indicator.
The ‘Charger Battery Level’ indicator shows the battery level in
the Charger.
Caution: As the Charger provides
the charge for recharging the CLS
battery, it is important to start the
charging session with a full Charger
battery.
If the charge falls to one bar, recharge
the Charger.
Note: Always recharge the Charger at the end of each CLS
charging session to ensure you start the next charging session
with a full Charger.