Service manual
1
2- Press the oil line retention plates into place until
they seat. Install the two screws (
5
⁄16-18 x
3
⁄4 button
head) through the oil line retention plates. First
screw goes in the transmission top cover and the
s
econd mounts into the crankcase near the rear
motor mount. Treat both screws with blue
threadlock and tighten to 18-ft-lbs.
13- Tighten transmission top cover screws to 100-120 in-lbs.
1
4- Install the vent line (S&S PN 50-8291) with clamps
(S&S PN 50-8156).
1
5- Reconect neutral switch wires.
16- Check function of neutral switch.
11
S&S
®
Replacement Parts for Harley-Davidson
®
Dyna
T
M
Models
1- Plate ........................................................................106-1176
2-
Seal (4 pack).............................................................106-1177
3-
BHSHCS
5
⁄1
6
-18 x
3
⁄4 (10 pack) ....................................106-1178
4-
Washer (4 pack).......................................................106-1185
5-
Line, oil supply .........................................................31-0447
6-
Line, oil return..........................................................31-0048
7-
Line assembly, oil feed.............................................31-0449
8-
Top cover ..................................................................56-1615
9-
SHC -
1
⁄4-20 x 1
1
⁄2” (10 pack)......................................106-1179
10-
SHC -
1
⁄4-20 x 2
1
⁄4" (10 pack)......................................106-1180
11-
SHC -
1
⁄4-20 x 1
3
⁄4" (10 pack)......................................106-1181
12-
SHC -
1
⁄4-20 x 1
1
⁄4" (10 pack)........................................50-0330
13-
Gasket, tranny top cover.........................................56-1261
14- Drill Template.........................................................106-1188
15-
Fitting (5 pack) ........................................................106-1182
16-
Hose, 90-degree bend .............................................50-8292
17-
Clamp (10 pack) .........................................................50-8156
18-
Plug, pipe (10 pack).................................................106-1175
19-
O-ring (10 pack).......................................................106-1183
20-
Fitting (2 pack) ........................................................106-1173
11
14
1
12
9
18
7
14
13
8
3
4
2
4
1
3
5
19
20
16
6
17
15
17
10