Technical Specifications

Form: CS1640

Rev.: 011413

TECHNICAL DATA RO-103

ACRYLIC POOL PAINT

.DESCRIPTION AND USES .

Rust-Oleum

High Performance Acrylic Pool Paint is

designed to offer advantages over traditional solvent-based

paints. This high performance acrylic can and should be

applied to damp surfaces. This paint is safe to apply to

previously painted chlorinated and synthetic rubber surfaces.

This acrylic will clean up with soap and water and can allow

the pool to be filled within 3 days after the final application of

paint, when short down times are critical.

Do not use on fiberglass surfaces, hot tubs, or spas.

.PRODUCTS .

1-Gallon Containers Description

267354 White

267357 Marlin Blue

270182 Black

270183 Aqua

.PRODUCT APPLICATION .

SURFACE PREPARATION

ALL SURFACES: All surfaces should be scrubbed clean with

Rust-Oleum Clean & Prep Solution or a suitable detergent

and water solution and allowed to dry completely.

PREVIOUSLY COATED: Previously coated surfaces must be

sound and in good condition. Smooth, hard, or glossy finishes

should be scarified by sanding or sweep blasting to create a

surface profile. The High Performance Acrylic Pool Paint is

compatible with most coatings, but a test patch is suggested.

CONCRETE OR MASONRY: New concrete or masonry must

cure 30 days before coating. Any concrete surface must be

protected from moisture transmission from uncoated areas.

Remove all loose, unsound concrete. Remove laitance and

create a surface profile by acid etching with Rust-Oleum

Concrete Saver

108 Cleaning and Etch Solution, or by

grinding. Surface sealers and curing agents must be removed

by grinding.

PAGE 1
TECHNICAL DATA RO-103 ACRYLIC POOL PAINT .DESCRIPTION AND USES .PRODUCT APPLICATION . SURFACE PREPARATION Rust-Oleum® High Performance Acrylic Pool Paint is designed to offer advantages over traditional solvent-based paints. This high performance acrylic can and should be applied to damp surfaces. This paint is safe to apply to previously painted chlorinated and synthetic rubber surfaces.
PAGE 2
TECHNICAL DATA ACRYLIC POOL PAINT .PRODUCT APPLICATION (cont.) . PERFORMANCE CHARACTERISTICS APPLICATION . SLIP RESISTANCE SURFACES The Rust-Oleum Concrete Saver® 200 Anti-Skid Additive can be used on steps, wading and baby pools, and other areas to improve the slip resistance. Immediately after applying coating in the desired area, broadcast the 200 Anti-Skid Additive by hand, to your desired amount, onto the wet film.
PAGE 3
TECHNICAL DATA ACRYLIC POOL PAINT . PHYSICAL PROPERTIES . Acrylic Pool Paint Modified Acrylic Varies with color Water, Glycol Ethers 11.6-12.0 lbs. 1.40-1.44 kg 53.0-55.0% 34.0-36.0% <207 g/l (1.72 lbs./gal.) NA 1.0-2.