Owner`s manual

34
About the tempo and time signature
Setting the time signature
If you are recording a phrase with a time signature of other than 4/4, set the correct
time signature before recording.
* It is not possible to change the time signature after recording.
* It is not possible to set a time signature whose denominator is anything other than 4.
fig.09-03
1. Turn the PHRASE SELECT knob to select the phrase track you wish to
record.
2. Press and hold the TAP TEMPO button for two seconds or longer.
The indicator will flash, then go out, and you will be able to set the time signature.
3. Press the TAP TEMPO button as many times as the time signature you wish
to set.
When you have finished setting the time signature, the indicator will flash, and you
will automatically return to the state in which you can make tempo settings.
If you hold down the TAP TEMPO button to set the beat immediately after setting
the tempo, the action of the button being pressed is interpreted as setting the
tempo, and you may end up inadvertently changing the tempo as a result. Be sure
to leave a brief interval between setting the tempo and setting the beat.
2, 3
1
RC-20XL_e.book 34 ページ ２００４年４月２８日 水曜日 午後４時１２分