Owner`s manual

Recording
42
Supplying power to the mic
Here’s how to supply power to a plug-in
mic.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<PLUGIN MIC>.
2. Touch <PLUG-IN POWER>.
3. Touch <ON>.
Setting
OFF
ON
4. Touch <BACK> twice to return to the
main screen (p. 16).
Setting the Recording Level
and Mic Directionality
Here you can make settings for the input
level and input device as appropriate for
what you’re recording. Setting the level
appropriately will allow you to make a
higher quality recording.
Selecting the Internal Mic
Mode
If the REC SOURCE (p. 31) is set to “internal
mic,” “INT mic,” or “INT” (internal directional
mic mixed with the internal omnidirectional
mic), you can change the mic response by
adjusting the mix balance between the
directional mic (XY) and omnidirectional
mic (OMNI). The R-26 lets you choose one
of three pre-adjusted modes optimized
for dierent types of recording. In
addition to these, you can choose modes
that use only the directional mics, only
the omnidirectional mics, or manual
balance adjustment, giving you a total of
six recording modes to choose from as
appropriate for your needs.
1. From the main screen, press the
panel’s [SENS] button.
The INPUT SENS SETUP screen will appear.