Owner`s manual

100
Error Messages
This section explains the error messages that may appear in the display.
Message Problem
Clock Initialized
Power for the internal clock was lost, so the internal clock has been
initialized. Please specify the date and time.
Battery Low
The batteries or the external power supply have run low. Please
replace the batteries or use an AC adaptor.
Improper Song
This le is of a format that the R-26 cannot use.
Already Exists
An identically named le or folder exists. Please use a dierent name
to create the le or folder.
Song Protected
The le is protected. Turn Write Protect OFF before you execute the
operation.
Name Too Long
The name is too long. Shorten the name of the le.
File System Error
There is a problem with the SD card. Format the SD card on the R-26.
SD Card Unformatted
The SD card has not been formatted. Format the SD card on the
R-26.
SD Card Full
The SD card has insucient free space. Free up space on the card by
copying les to your personal computer and making backups, or by
erasing les, or by formatting the card.
Cannot Change Name
The le cannot be renamed because the le name contains
double-byte characters.
File Size Over 2 GB
The le contains too much data.
SD Card Slow
Writing to the SD card could not be performed fast enough. Please
use an SD card that is known to work with the R-26. In some cases,
repeated writing and deleting of les may cause the les to become
fragmented on the SD card, impairing the processing capability. If
so, please reformat the SD card.
SD Card Locked
The SD card is locked. Remove the SD card and turn o the Lock
setting.
SD Card Error
A problem occurred while accessing the SD card. The SD card might
be damaged.
Root Folder Full
The root folder is full. Erase les or move them to a dierent location.
Folder is not empty
The folder already contains le(s). Try the procedure again after the
les in the folder have been erased.
No Card
No SD card is inserted. Insert an SD card into the R-26.
HOLD is ON
The operation is not possible because the [HOLD] switch is on. Turn
the [HOLD] switch o if you want to perform an operation.
Now Recording
Currently recording. Stop recording if you want to perform an
operation.
Now Playing
Currently playing. Stop playback if you want to perform an
operation.