User guide

10-4
FlexPak 3000 DC Drive Software Reference
NETW DROP NUMBER
(P.900)
Network Drop
Number. Selects the
base drop number
the network option
board will respond to
on the network.
NETW DROP NUMBER
cannot be changed
through the network.
Parameter Range:
For AutoMax Network Communication kit:
1 to 55 if
NETW CONNECT TYPE
=
BASIC
;
1 to 52 if
NETW CONNECT TYPE
=
FULL
For DeviceNet Interface kit: 0 to 63 (
NETW CONNECT
TYPE
value does not affect)
For ControlNet Network Communication kit: 1 to 99
(
NETW CONNECT TYPE
value does not affect)
Default Setting:
1
Parameter Type:
Configurable
OIM Menu Path(s):
Network Communications
When
NETW CONNECT TYPE
(P.910) is set to
FULL
, the AutoMax Network
Communication kit occupies multiple network drops beginning at
NETW DROP
NUMBER
. The number of drops occupied (drop depth) affects the upper limit of
NETW
DROP NUMBER
. See
NETW CONNECT TYPE
(P.910), to determine drop depth.
NETW OUT REG
1
SELECT
(P.902)
Selects the
parameter to be
monitored.
Parameter Range:
–32768 to 32767
Default Setting:
0
Parameter Type:
Tun abl e
OIM Menu Path(s):
Network Communications
Select the parameter to monitor by configuring the parameter number. For example,
setting this parameter equal to 588 will write the value of parameter
FIELD DELTA
(P.588) to the installed network register.
NETW OUT REG
2
SELECT
(P.903)
Selects the
parameter to be
monitored.
Parameter Range:
–32768 to 32767
Default Setting:
0
Parameter Type:
Tun abl e
OIM Menu Path(s):
Network Communications
Select the parameter to monitor by configuring the parameter number. For example,
setting this parameter equal to 588 will write the value of parameter
FIELD DELTA
(P.588) to the installed network register.