Owner manual

ManualsBrandsRockwell Automation ManualsEquipment2727-MRJB2 MobileView Terminal Junction Box

Publication 2727-IN010A-EN-P - May 2004

Installation Instructions

MobileView Junction Box

(Catalog Number 2727-MRJB2)

English

The MobileView Junction Box (2727-MRJB2) integrates the following terminals into

the control system:

• MobileView Guard G750

• MobileView Machine Terminal MT750

The Junction Box can be used either inside or outside a control cabinet based on its

IP65 rating.

The cables that connect the MobileView terminal to the Junction Box are available

as separate catalog numbers.

• MobileView Connection Cable (Catalog Numbers 2727-MRTxx) connects the

MobileView terminal to the Junction Box. The Connection Cable is available

in 5, 10, 15, 20 meter (16.4, 32.8, 49.2, 65.6 foot) lengths.

• MobileView Junction Box Cable (2727-MREY1) connects the Junction Box to

the MobileView Connection Cable when the Junction Box is mounted inside

a cabinet. The cable is 2 meters (6.56 feet) long.

Inside. . .

Junction Box Dimensions and Connections ...................................................................... 2

Mounting the Junction Box on a DIN Rail ......................................................................... 3

Connecting the MobileView Terminal to the Junction Box ............................................... 5

Junction Box Pinout and Wiring ........................................................................................ 6

Specifications .................................................................................................................... 7

Summary of content (8 pages)

PAGE 1
Installation Instructions MobileView Junction Box (Catalog Number 2727-MRJB2) English The MobileView Junction Box (2727-MRJB2) integrates the following terminals into the control system: • MobileView Guard G750 • MobileView Machine Terminal MT750 The Junction Box can be used either inside or outside a control cabinet based on its IP65 rating. The cables that connect the MobileView terminal to the Junction Box are available as separate catalog numbers.
PAGE 2
MobileView Junction Box 70 mm (2.76 in) Junction Box Dimensions and Connections X3 X1 1 1 10 6 140 mm (5.52 in) 165 mm (6.
PAGE 3
MobileView Junction Box 3 Mounting the Junction Box on a DIN Rail Mount the Junction Box on a DIN rail inside the enclosure. Attach DIN Rail Adapter to MobileView Terminal Attach the DIN Rail Adapter to the back of the Junction Box using the screws provided. To install the Junction Box on a DIN rail: 1. Mount the DIN rail. 2. Hook the top slot of the adapter over the DIN rail. 3. While pressing the Junction Box against the DIN rail, snap the Junction Box into position.
PAGE 4
MobileView Junction Box To remove the Junction Box from the DIN rail: 1. Place a screwdriver in the adapter latch at the bottom of the Junction Box. 2. Holding the Junction Box, pry downward on the latch until the Junction Box is released from the DIN rail. Mounting Junction Box to a Wall 10.2 mm (0.40i n) 64.8 mm (2.55 in) Use the dimensions below for drilling the holes to mount the MobileView Junction Box to a wall.
PAGE 5
MobileView Junction Box 5 Connecting the MobileView Terminal to the Junction Box Control Cabinet Junction Box Run Erro r MobileView Terminal ESC 7 8 9 4 5 6 1 2 3 . 0 - KE TOP Power Supply, E-Stop, enabling switch MobileView Connection Cable Dust Cover K1 maximum wall thickness 5 mm (0.2 in) K1 Junction Box Cable 25 ± 0.1 mm (1.0 ± 0.0039 in) Connector Cutout 25 ± 0.1 mm (1.0 ± 0.
PAGE 6
MobileView Junction Box Junction Box Pinout and Wiring MobileView MobileView Connection Cable S19 K3 pink 6 black 7 green-brown 8 9 white-green 10 grey-pink 11 red-blue 1 brown yellow 2 green 3 grey 4 violet 5 S4 K2 1 2 3 blue white orange 6 red MobileView Junction Box Cable K1 K2 pink 1 black 2 3 green-brown 4 white-green 5 grey-pink 6 red-blue brown 7 yellow 8 green 12 grey 17 violet 11 9 10 13 14 15 16 blue white orange red Junction Box K1 1 24V DC 2 GND_IN 3 E-Stop, circuit 1, pos.
PAGE 7
MobileView Junction Box 7 Specifications Electrical Specifications 24V dc Power Supply Use a 24V dc Safety Extra Low Voltage power supply. Supply Voltage Range: 18V dc to 32V dc Current Consumption: 450mA at 24V dc, 600mA at 18V dc (with MobileView Terminal attached) Peak Inrush Current: 5.