Technical information

RESIDENTIAL
T
he premium line
o
f approved replacement parts.
To place your order call 1-800-621-5622; fax [phone]
12
PowerVent with the Guardian System
™
Replacement Parts
Parts Specific to Models Manufactured with
Robertshaw gas control valves between
July 2006 and October 2007
• Pilot Assembly – Natural Gas Models
SP13418
SP13420
SP13422
SP13424
• Pilot Assembly – LP Gas Models
SP13419
SP13421
SP13423
SP13425
• FV Wiper Control and Gas Valve Assembly –
Natural Gas Models
SP20170A (40)
SP20170B (50)
SP13458D
• FV Wiper Control and Gas Valve Assembly –
LP Gas Models
SP13459
SP13459B
• Control – FV Wiper Electronics
SP20123B
• FV Sensor Kit
SP13447B
Parts Specific to Models Manufactured
with White-Rodgers gas control valves
October 2007 to Present
• Intelli-Vent Gas Valve – Natural Gas
SP13845A
SP13845B
• Intelli-Vent Gas Valve – LP Gas
SP13846A
SP13846B
• Hot Surface Ignitor – All White-Rodgers Models
SP14218A (40/50)
SP14218B (75)
Common Service Parts
• Blower Assembly – High Performance
SP13416 (40/50)
• Blower Assembly
SP13605 (40/50 Short)
• Blower Assembly
SP14140 (60)
• Blower Assembly
AP14378 (75)
• Anode Rod
SP11309C (40/50 only)
• Temperature & Pressure Relief Valve
SP8346 (40/50 only)
• Temperature & Pressure Relief Valve
SP12574 (40/50 Short)
• Drain Valve
SP12112G (40/50 only)
• Heat Trap Kit
SP20003 (40/50 only)
• Inner Door Gasket Kit
SP20063
• FV Sensor and Snap Cap
(Note: Sensor and Snap Cap must be ordered together)
AP13447 FV Sensor
AP13450 Snap Cap
• Vacuum Switch – For use with 40 and 50 Gallon
Tall Models
SP20116
• Vacuum Switch – For use with 40 and 50 Gallon
Short Models
SP20117
• Vacuum Switch – For use with 60 Gallon Models
SP20116A
• Vacuum Switch – For use with 75 Gallon Models
SP20117A
PARTS DIAGRAM
ON PAGE 43
Hot Surface Ignitor
Intelli-Vent Gas Valve
FV Sensor