User guide

6
RaySafe Xi View Manual – Getting started
START MEASURING
1
2
Figure 2. RaySafe Xi View main window.
1: Button for connecting/disconnecting instrument.
2: Exposure data displayed as text or waveforms.
Press the Start button (1 in Figure 2). The orange dot will turn green when your instrument is connected.
After each exposure, measurements will be displayed as digits and waveforms (if available) (2 in Figure 2).
SETUP OF BLUETOOTH COMMUNICATION
1. Follow the instructions enclosed with the PC’s internal or external Bluetooth device.
2. Insert the Bluetooth module into the Base Unit’s RS-232 port and turn on the Base Unit.
3. Go to the Bluetooth icon in the Windows Control Panel. Select a menu called “Add Bluetooth device” or
similar.
4. The PC will scan for available Bluetooth devices and will find “Xi slave”. Add this device.
5. When prompted enter the passkey for the Xi slave which is “1234”.
6. The installation procedure will finish. Please note the number of the COM port assigned to the instrument.