Technical information

Appendix A MM200 High-Speed Microwave Modem
A-12 TM086 – Rev. 4.1
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<4>
<4>
<4>
<1>
<1>
Minor Alarm2 Mask
Common Alarm1
Mask
Common Alarm2
Mask
Control Mode
PRBS
Last Rate Control
User Mode
APC Control
APC Maximum Tx
Level
APC Default Tx Level
APC Speed
APC Step Size
APC Range
Bit 3 – 7 = Spare
0 = Mask, 1 = Allow
Bit 0 – 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Glue Logic FPGA Fail
Bit 1 = Test FPGA Fail
Bits 2 – 7 = Spare
0 = Mask, 1 = Allow
Bit 0 – 7 = Spare
0 = local
1 = terminal
2 = computer
3 = Ethernet
0 = normal
1 = prbs_23
2 = prbs_23m
3 = prbs_15
4 = prbs_15m
0 = symbol
1 = data
2 = auto
0 = Debug
1 = All access
2 = Level 1
3 = Level 2
Sets APC transmit control (Not Yet Implemented)
Maximum APC transmit level (Not Yet Implemented)
Default APC transmit level (Not Yet Implemented)
Sets the speed at which the transmitter changes (Not Yet
Implemented)
Sets the amount each APC command changes the transmitter
(Not Yet Implemented)
Controls the APC transmit power range (Not Yet
Implemented)
Opcode: <0x207F> Query a modulator’s configuration and status
Query Response
<1>
Number of nonvol
bytes*
* M&C developers
MUST use this
number of nonvolatile