User manual

70
Camera Status
The camera status is indicated by the icons shown below:
Icon Camera Status
Scheduled or continuous recording is in process
This IP camera supports audio function
This IP camera supports PT function
Manual recording is enabled
The recording triggered by advanced event management (‘Camera
Settings’ > ‘Alarm Settings’ > ‘Advanced Mode’) is in process
The alarm input 1 of the IP camera is triggered and recording is in process
The alarm input 2 of the IP camera is triggered and recording is in process
The alarm input 3 of the IP camera is triggered and recording is in process
Motion detection recording is in process
Digital zoom is enabled
Connection Message
When the NVR fails to display the video of an IP camera, a message will be shown in
the channel window to indicate the status.
Message Description
Connecting If the IP camera is located in remote network or the Internet, it
may take some time to establish the connection to the camera.
Disconnected The NVR cannot connect to the IP camera. Please check the
network connection of your computer and the availability of the
IP camera. If the IP camera is installed on the Internet, make
sure you have opened the port on your router or gateway in
order to access the IP camera.
No Permission You do not have the right to view the monitoring channel.
Please login as a user with the access right or contact the system
administrator.
Server Error Please check the camera settings or update the firmware of the
IP camera (if any). Contact the technical support if the error
persists.