Thank you for purchasing your new Ultrasonic Humidifier. The humidifier helps you to restore an appropriate level of humidity and eliminate the discomfort associated with dry air. We wish you many years of healthy indoor air with this efficient and effective product. We recommend you spend some time reading this instruction manual in order to fully understand all the operational features it offers. * Read all the safety instructions carefully before use and keep this instruction manual for future reference.
12. Care should be taken when using the appliance due to emission of hot water vapor. 13. Ba fore cleaning and maintenance, the appliance must be disconnected from the power supply. 14. Prior to cleaning or other maintenance, the appliance must ba disconnected from the supply mains. 15. This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Temperature: Aridity 3. Put the water tank on the main 4. Check If the rated voltage meets the Input voltage, and base. plug Into the socks. Then display shows the current temperature and humidity. 5. Touch the symbol POWER on" on the machine. The machine will begin to work in AUTO mode. Display shows AUTO symbol. s2 Impersonators 100 [»102] the ar (F) Superstructure of jogs 3 Humidiy®) Touch the symbol ANION the anon generator works.
13. On the remote controller, the related symbol controls the corresponding function. instructions For Usage + Take the water tank out of the unit, open the water tank cover and fill the tank with clear water. Close the cover and put the tank onto the base unit carefully. + Put the nozzle into the socket on top of the water tank. « Connect the power supply, switch on the unit (NEVER RUN THE UNIT WHEN THERE 1S NO WATER IN WATER TANK), the main connection lamp will on. The unit will begin working.
TECHNICAL DATA * Model: 808C * Total power: 110W * Heating power: 80W « Water tank capacity: * Humidify power: 30W . Evaporation Rate: >350mL/h * Noise level: 38dB(A) * Power supply: (us: 120v Bor) {UK: 230V 50Hz) | Maintenance In a case when the water is hard which means water contains too much calcium and magnesium, it can cause a “white powder” problem and leave heavy scales on the surface of water tank, transducer and inner surface of the water tank.
I Trouble Shooting Guide If any trouble is found in normal operation, please kindly refer to the following points: ruble Possible reasons cation Power lamp off, does not work Power lamp on, no mist outset with wind Abnormal smell mist Power lamp on, unit doesn’t work Mist fog Is too low Abnormal noise Mist fog coming out from around nozzle X DISPOSAL No power supply 1. No water in water tank 2. Security switch is too loose 1. New unit 2.
