CA Cleaning Products Right to Know Act

5
Installation (continued)
4
Determining the correct length
of chain
5
Making the electrical
connections
□ Use pliers and a screwdriver to twist open the link at
the end of the chain (JJ). Remove the open links.
□ Turn the quick link (KK) open at the bottom end of
the chain (JJ). Remove the quick link (KK).
□ Take one open link and use it to attach the chain (JJ
)
to the screw collar loop (II). Close the link.
□ Place the other end of the chain (JJ) through the
canopy (AA) and the ring (HH).
□ Use the quick link (KK) to attach the loop (A) to the
chain (JJ), raising and lowering the fixture until you
achieve the desired height.
□ Once the desired height is achieved, use pliers and
a screwdriver to twist open the last unused link of
chain (JJ). Remove and save the excess chain.
□ Close the quick link (KK) to connect the chain (JJ) to
the loop (A).
CAUTION: To avoid damage to the links, only open
a link enough to hook onto another link (about 5 mm).
Cover the chain (JJ) with cloth to prevent damage to
the link finish.
□ Weave the fixture wires up through the chain
(JJ), the ring (HH), the canopy (AA), the screw
collar loop (II), and the nipple (GG).
□ Wrap the ground wire from the fixture around
the ground screw (DD) on the mounting strap
(CC), and use a wire connector (BB) to connect
it to the ground wire from the outlet box.
□ Use a wire connector (BB) to connect the wire
without writing on it from the fixture to the
white wire (neutral wire) from the outlet box.
□ Use a wire connector (BB) to connect the wire
with writing on it from the fixture to the black
wire (live wire) from the outlet box.
□ Wrap the three wire connections with
electrical tape for a more secure connection.
□ Position the wires back inside the outlet box.