How-To Guide

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This appliance and its antenna must not be co-located or operation in conjunction
with any other antenna or transmitter.
Smartphone App Installation
English
1) Go to Play Store or App Store in smartphone.
2) Search “Kodak Instant Printer”
3) Install it to your smartphone.
Note
Troubleshooting
* Photo Paper will go in and out 4 times (Yellow, Magenta, Cyan, Overcoating).
Do not touch the paper during printing process for best image quality
* Do not pull paper out by force during printing.
* Do not place an object in front of the paper exit slot.
* Use the latest application for best print quality. Check the latest app version from
Google Play Store and Apple App Store.
* Printer has built-in battery. Charge the printer before using.
* Handle with care during charging to prevent electric shock.
* Do not disassemble or deform.
* Avoid too high or low temperature or humidity.
* The higher resolution the image has, the higher quality the printed photo has.
Recommended image size is 1280*2448 pixel.
* Operating Temperature : 0~40℃ (32104 °F)
Bluetooth Connection
1) Turn on Bluetooth in your smartphone.
2) Turn on Instant 2 in 1 Camera.
3) Go to Bluetooth setting in your smartphone and select
"KODAK instant-XXXX" (’XXXX’ are 4 digits combination of numbers and letters.)
Menu
1) Border : You can select border of printed image.
2) Filter : You can select ilters when you take the photo
3) Flash : You can set Flash Auto or O.
4) Language : You can set language
* Taken photos are deleted when the camera is powered OFF.
Before Start
1) Mini Shot has built-in
Symptom
Paper Jam
Image quality is not
good.
Mini Shot is not
responding
Power o and Power On again. Paper will be automatically ejected
If not, please contact customer service.
Print quality could be less if your photo source has low resolution.
Over 1280 x 2448 pixel is recommended for best image quality.
Press Reset button with sharp tool like pin.
Cause / Solution
Power, Shutter and Active Status
OK
Control Panel
Spec
Menu: You can select Borders, Filters, Flash or Language
Print : Print image on LCD.
Arrow Button: You can go to left or right in the menu.
OK: Confirm the setting or selected menu.
RESET
Power ON : White / Power OFF(2Sec) : O / Printing : White lickering
F.W Upgrade : Pink lickering / No Cartrige, Error : Red Flickering
Waiting,Cooling : White
Charging : Red / Charging Complete : Green
Shutter Button : Take a Photo
Connecting : Blue Blink / Bluetooth Complete : Green
Charge
Take a Photo
1) Turn on Mini Shot by pressing power button.
2) Press shutter button to take the photo after positioning the subject in LCD screen.
CHARGE
2)
Pull out or Push in
cartridge with handle.
battery. Charge Mini Shot
before using it.
change
cartridge.
How to
Dimension 134.6(W) x 79.2(H) x 26.4(D) mm
LCD Viewfinder O
Paper Capacity 20, 30, 50 Sheet
LCD UI Function Print, Photo Frame, Brightness, Filter, Reprint, Flash
Camera 10 Mega Pixel
Connectivity Bluetooth
Color 2 Colors; White, Kodak Yellow
Paper Size 54 x 86 mm(Credit Card Size)
Cartridge
All-in-One 4Pass Cartridge
Print Technology 4Pass
Smart Phone Printing O
NEW DESIGN
APP
QR
Code
QR
Code
C210
Instant Photo Printer combo
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.