Operating Manual

Table Of Contents
Using Manual Exposure
When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or both.
To activate Manual Exposure
1. Turn the Mode dial to icon Manual Exposure.
2. Press OK button to enter Adjust mode then use
Up/Down button or Left/Right button to select the
aperture value or shutter speed in loop.
3. Press the Shutter button to capture the image.
Displays the aperture and
shutter speed value
Using Continuous Shooting
Turn the Mode dial to icon Continuous Shooting. Available shooting options only show up in Record
Menu when the mode dial has been turned to Continuous Shooting. Press
or keys to select
between the following settings:
Icon Item Description
Burst
Full press and hold the shutter button to take a continuous shooting until
release the shutter button or memory card is full.
Speedy Burst
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to 4:3 VGA only.
Using Panorama Mode
Use this feature to create a panoramic photo from multiple
shots. You can combine several shots into one single image
quickly and easily.
The actual size of stitched image may be different due to the panoramic angle and
stitching result as well as the level of camera shaking.
It is recommended to use a tripod to stabilize the camera, and then move the
camera slowly during capturing.
The longest time of capturing is approximately 45 seconds.
If you select From Top to Bottom or From Bottom to Top in 360-degree
panorama, it is recommended to turn the camera over 90 degrees in order to make
sure the stability during capturing.
In Panorama mode, uneven brightness may result in difference between the
captured image and its actual scene.
33