User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Preparations & Installation
- Chapter 3 Network Service Configurations
- Chapter 4 VoIP Telephone Adapter Configurations
- Chapter 5 Netowrk
- Chapter 6 NAT Trans
- Chapter 7 SIP Setting
- Chapter 8 Advance Setting
- Chapter 9 Other Setting
- Appendix A Voice Communication Samples
- Case 1: ATA to ATA connection via IP address
- Case 2: (Peer-to-Peer mode) VIP-157S Port 1 to Port 2 communications
- Case 3: Call Forward Feature_Example 1
- Case 4: Call Forward Feature_Example 2
- Case 5: Call Forward Feature_Example 3
- Case 6: Call Forward Feature_Example 4
- Case 7: Auto Answer Feature_IP to PSTN
- Case 8: Auto Answer Feature_PSTN to IP
- Appendix B The method of operation guide
- Appendix C VIP-156/VIP-156PE/VIP-157/VIP-157S Specifications
UCaution:U VIP-156/VIP-157 VPN can’t use the encryption or compression for VPN connection.
34BIPV6 Settings
This page defines the IPV6 setting in this page, you can programm the IPV6 information.
Field Description
IPV6 Active
Support three IPV6 type: Auto, Fixed IPV6, IPV6 in IPV4 Tunnel
IPV6 address
Setting the WAN IPV6 address or display it.(64 bits)
SubnetPrefix Length
Default is 64, settin the
Default Gateway
IPV6 gateway address(64 bits)
LAN IPv6 Address:
IP V6 LAN address. (64 bits)
LAN IPv6 Link-Local
Address
Link local address information.
Autoconfiguration
Type
It support Statless, stateful(DHCP V6).
34