User Manual

SIP Analog Telephone Adapter
15
Please locate your PC in the same network segment (192.168.0.x) of ATA. If you’re
not familiar with TCP/IP, please refer to related chapter on user’s manual CD or
consult your network administrator for proper network configurations
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the address bar.
After logging on machine with username/password (default: root / no password), browse “Network” -->
“Network Settings” configuration menu:
Parameter Description
IP address LAN IP address of ATA
Default: 192.168.0.1
Subnet Mask LAN mask of
ATA
Default: 255.255.255.0
Default Gateway Gateway of
ATA
Default: 192.168.0.254
Network settings via Keypad commands
The ATA series phone adapters support telephone keypad configurations, please connect analog
telephone set and refer to the following table for machine network configurations.
When you want to run the setup or the start function, it
must unlock the protect function #190# before setting up
network settings and ATA function via keypad.
L Hint