User Manual

Cam Viewer Lite
page-33
7.3 I/O Device
Module Setting: To name the module device and ID connecting the digital input/output device(s)
to your system.
Devices: Shows the device(s) installed to the system.
ID: Select the number of the I/O port to which you plug the ribbon cable.
Digital Input Monitor: Trigger the digital input device and the related icon will light-up. To check if
the device is correctly connected or not.
Digital Output Monitor: Click on the icon and trigger the digital device connecting to your system
to test if it is correctly connected.
Digital Input/Output pins of selected I/O module:
Name: To name the device (input and output).
Type: To select from the pull-down menu. N/O means that the digital signal is Open in normal
condition; N/C mean that the signal is Close in normal condition.