User Manual

21
1.RJ45LANsocket
 Connect to PC or Hub/Switch. For connect to 10Base-T Ethernet or 100Base-
TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect
or negotiate the transmission speed of the network automatically. Please use
Category 5 “straight through” cable to connect the ICA-530 to a 100Mbps Fast
Ethernetnetworkswitchorhub.
Note
In caseyouneedtoconnectthedevicetoPC ornotebookdirectly,
youshouldusecrossovercableinstead.
2.RS-485&DI/DO
 Connect to a local keyboard controller and connect to sensor in and alarm out
devices
InsidetheTELbox:
Name Function
12VDC DC 12V output (50mA maximum)
GND GND
D+ RS485 data +
D- RS485 data -
DI Digital signal input
DO Digital signal output
Note
The RS-485 of ICA-530 is master that can control external scanner.
3.LocalVideooutput(BNCport)
The Network Camera also provides composite video output. User can use BNC
videocabletoconnecttheNetworkCamerawithaTVmonitororVCR.
4.DC-inJack
The input power is 12VDC. Note that supply the power to the Network Camera
with standard power adapter included in package. Otherwise, the improper
power adapter may damage the unit and result in danger.