ELECTRONIC MOhJLAR SWITCHING SYS,TEM Panasonic Please read this manual before connecting Quick Reference Card for Standard the KX-T61610. Telephone can be found on pages.+22 through 6-29. _ .
Thank you for purchasing the Panasonic Model KX-T61610, Electronic Modular Switching System (EMSS). System Component Description Model No. Service unit KX-7-61610 Electronic Modular Switching System Telephone KX-T61620 KX- 7-61630 KX- T61650 EMSS Proprietary TelephotleEMSS Proprietary Telephorze with LCD EMSS Proprietary Telephone Optional equipment KX- T61640 KX-T30860D(only) KX- T30865 KX- T30890 KX-Al6 DSS Console Doorphone Adaptor Doorphotze Headset System Back-up Unit l-l ..
NOTIFY THE TELEPHONE COMPANY Installation must be performed by the telephone company or a qualified professional installer. Notify the Telephone Company Before connecting this equipment to any telephone, call the telephone company and inform them of the following: ;.’ ),l FCC Registration No. .. . . . . . . . . . . . . . . . . . foul ‘1, .‘* Ringer Equivalence . . .. .. . . . . . . . . .. . . . .. . : : .. : .. . l Facility Interface Code . . . . . . . . . . . . . . . . . . . . . . . ; 1.. . . . . . . .
TABLE CiF CONTENTS ’ .2-1 .2-2 .2-4 Name and Location ........................................... Installation ...................................................... Connection ..................................................... .2-5 2-5 2-6 Frame Growld Cotmectiotl ...................................... Rechargeable Barfery ltlslallariotz .................................. Cotltzecrion of The Central Ofice Litle ..............................
Programmable Toll Prefix ............... Programmable Operator Cull Programmable Directory Assistance with 1 ....... 3-22 ....... 3-23 no restrict ....... 3-24 Auto Amwer ....... 3-25 Host PBX Access Codes Assignment has not been stored ....... 3-26 Preferred CO Line Assignment. ........... non-assignment ...... .3-27 has been removed ...... ‘3-28 Automatic Answering Selection Programmable .......... .- has been added (AutomaticlManual) . . Call Waiting .............
When a Line is Busy .......................... Automatic Call Back Busy-(Camp-on) ...................................... Busy Station Sigtlaling Last Number Redial .......................................... To Receive 4-7 4-8 4-8 Calls Answer. ........................ Automatic Answer-Intercom ....... Dial Call Pickup ................. Directed Call Pickup ............. Call Park Retrieve ............... Doorphone ..................... Distinctive Ring Totle ............. While Having .. .. .. .. .. .
Station Programming Dial Call Pickup Detly , Call Forwarding . . . . . Do tlot Disturb . . . , . . . Data Litle Seclrrity . . . . . Saved Nwnber Redial Flexible Nighr Service . . Statioti Program Clear . .. . . .. .. . . .. . . .. .. .. . .. .. .. .. .. . .. . . .. . . .. . .. .. . .. . .... .. .. . . . .. . .. . . . .. . . . .. . . . . . . 4-34 ...... 4-35 ...... 4-37 ...... 4-35 ...... 4-38 ...... 4-39 ...... 4-40 Operation for a Standard Telephone To Make Calls ........................
NAME AND LOCATION : Night ltldicator Day Indicator External Music Jack Power Indicator Burtotl B Ground Terminal Buttery Backup Cotztlecio EIA Cotmector (RS-232 C) Push Buttons A and B simultaneously to open Front Cover.
INSTALLATION Installation Cautions *Avoid insralling in the following places. (Doing so may resulr in malfunction, noise, or discoloration.) 1. In direct sunlighr and her, cold, or humid places. (Temperarure range: 32”F-104°F) 2. Sulfuric gases produced .in areas where there are thermal springs, etc. may damage the equipment or contacls. 3. Places in which shocks or vibrations are frequent or strong. 4. Dusty places, or places where water or oil may come into contact with the unit. 5.
The wall where the KX-T61610 is to be mounted must be able to support a weight of KX-T61610. than the ones supplied are used, use the same-sized diameter screws as the enclosed ones. ------- _________ ----a--------------- To Wall Mount: other ____ To Mount on Concrete or Mortar Walls: 1. Place the templet (included) on the wall to mark the 3 screw positions. I If screws 1. Place the templet positions. 1 (included) to mark 3 screw 2.
CONNECTION After all the connections are completed, the Power Switch ON. turn If an extension does not operate properly (for example: The LCD of the KX-T6163Ol Speflker KX-T30830 does not display properly.), disconnect the telephone from the ejctension line and then connect again, or turn OFF the power switch of the KX-T61610 and then ON again.
IMPORTANT!!! Surely connect the frame of the KX-T61610 to earth ground properly to protect the unit. /TV / 1. Remove the battery cover from the compartment. (Fig. 1) 2. Connect the battery (included). (Fig. 2) 3. I~tstall the battery i,lto the battery compartment. (Fig. 3) *Replace the battery every 5 years with (P-OlHFIGI). To remove comlector. depress to release a,ld slide (pull) apart connector. (Fig. 2) Fig. .
1. Insert plug of the teleline cord (2-conductor wir- the modular phone ing) into the modular jack CO) on the KX-T61610. (marked 2. Place the six telephone line cords into Holder. - RT Holder (see srep 2) .u B Use 2-condrccror lcirirlg cord. To Terminal Board or Modular from the Coltral Office (CO). R: Ring T: Tip View of TEL Jack (CO) !! Jacks Caution Mis-connection may cause the KX-T61610 to operate improperly.
I. Insert the modular plug of the extension line cord (6conductor wiring) into the modular jack (markeci EXT.) on the KX-T61610. 2. Place the cords into Holder. L RTH Holder (see step 2 cB R: T: L: H: Ring Tip Low High View of TEL Jack (extension) A -----4-conductor wiring is required for each extemion. To Extensions The inner (DA TA). l The max.
1. Insert the modular plug of the exten- sion line cord (2-conductor wiring) into the modular jack (marked EXT.) on the KX-T61610. -I -b k 2. Place the cords into Holder. \ Outer Z pins (Low and High) will not be Itsedfor Standard Telephone. Holder , (see srep 2) R: Ring T: Tip Vie)%’of TEL Jack (extension) Use 2-conducior ltniring - To Extensions *The max.
Pair Telephone The DSS Console, KX-T61640 needs its Pair Telephone (EMSS Proprietary Telephone) for the operation, becaus’ the DSS console cannot work by itself. The EMSS Proprietary Telephone (such as KX-T61620, KX-T61630, KX-T61650, KX-T30820, KX-T30830, KX-T308SO) is required as a pair telephone for dialing, storing, etc. Place the KX-T61640 and the pair telephone side by side on your desk. 1. Insert the modular plug of the esten, sion line cord (4-conductor wiring, into the modular jack (market EXT.
Example: If y§-e&my has KX-T61630 at exrension 12 and is to use the DSS console (KX-T61640), rhe console should be connecled to extension 13. (Paired extension is ext. 12). 1. Connect the KX--61630 at extension 12. 2. Connect the KX-T61640 at extension 13. eFor use the KX-T61640, program should be done. Refer to “DSS Console Assignment” page 3-8. Extetlsion 12 KX- T61630 To Use Full Extensions When the DSS Console is Connected WKX-T61640 {1 . H KX-T61610 has 16 extensions.
111 I J Use a twoconductor pluo (?+a inch in dizmete !r) ehput impeda tnce -10 dBm Exterr iaf Music Source that has IIcord an interna resistance Speaker , \ Amplifier Use an RCA connector.
Adaptor . , lose the Optio/lal Doorphotle For instaiiitlg the door phone. Doorp/~orte Adaptor to the KX-T61610 1. f-few to install the -..-:nr,;r\,rr to the ho/es. @ posh the adnpror t .^,. (use tihe KY-T30860D t~.nt ;t lnckq itlto the ribs of the mit. flown 3” ‘,‘L‘L z. .--.-- only).
2. Wiring conneCtion of the Doorphone (A) Connect the doorphone adaptor to the terminal box using a 4-conductor modular -connector. (B) Connect the wires of doorphone 1 to the red and green screws of the terminal box. (C) Conrlect the tvires of doorphone 2 to the yellow and black screws of the terminal box. Doorphone Adaptor (KX-T30860D orlly) Terrniml Box Doorphone Doorphone I (KX-T30865) BLACK @The max. length below. 26 24 22 of the telephone line cord that connects the KX-T61610 AWG: AWG: AWG: .
If the telephone you are using with the KX-T61610 is polarity sensitive. 6. Confirm that dialing can be done on following exrensiotis iisirig a rotze telephone. 1. Cotmeci all extension wiritlg lo the KX-T61610. 2. Cotlfirtn that dialitlg can be done from estetlsiotls using a tone relephotle. Exlension Extetisioti Extension Extension Esterisioti Extensiotz all the 3. If a dialing cat1 tlof be dotle, rhe polarify berlcseen the exretlsiotl atld rhe h’X-T61610 musI be re\,ersed. 7. Il.. . CO 12...
1. Connect the cord from the KX-T61610. the optional 2. Plug in the AC power cord from KX-Al6 l The Battery life is 3 years. l A simple way to check the KX-A16 to is to disconnect the KX-T61610 and the KX-A16 from the AC outlets, and then observe if the KX-T61610 operates. elf the KX-T61610 does not operate, recharge the KX-A16. eAC Primary Fuse, (250 V, 1.25 A)xl: Replace the fuse which is in the fuse hold located on the rear, if the CHARGE Indicate is off the KX-A16. 3.
Serial Printe; /* Make cables so that the printer will be connected to the KX-T61610 as shown itz the chart. Cables tnust be shielded and the maximum length is 6.5 feet. Connection Chart: KX-T61610 RS-232C Printer RS-232C Circuit Twe VW Signal Name AA BA FG TXD 1 2 -- 1 3 FG RXD AA BB BB CB RXD CTS CT.9 3 5 2 TXD BA cc AB DSR SG 6 -/-7- 20 7 DTR SG CD AB CD DTR 5 6 8 CTS DSR DCD CB CC CF Pin No. 20 Pin. No. Signal Name C&fit (YE) “Panasonic data terminal; KX-D49IOD,.
PROGRAMMING To activate this system, the requirements from telephone company and the customer must be programmed Power Switch has beet1 turned on.
Whet1 the System Program Switch 011 the K-Y-T61610 is set to the PROGRAM KX-T61630 will change as follows. PA USE burro,1 I c7 \ positiotl, the operatiotl of the r------CLEnR bur lot’ PROGRAMMABLE FEA TURE burrotl bl’rtot’ 7 burrotl -----LIQUID CRYSTAL Display (LCD) -1 KX-T61630 CENTRAL OFFICE LINE buttotz button AUTOIMEh4ORY -SELECT PR EVIOUS brtttotl FLASH buttotl INTERCOM (ICM) blcttotr NEXT burrotl END buttotz 3-2 (CO) .
I. Turn the Power-Switch to ON , .. . . . .. . . .. . . .. . . ... . .. .. 2. Set the System Program Switch to PROGRAM , . .. .. .. . .. . The LCD on the KX-T61630 will show “ENTER PGM CODE”. @Be sure the handset of extension 11 is in the cradle and the speakerphone button off. 3. To program automatic line access number 9 and the phone number 987-654-3210 speed access code 00. (Refer to page 3-5.) KX-T61630 at extension I1 (Extension 11 must be a KX-T61630.) Dial (01) or press the A UT0 button.
,........_......~....~-~~..-......__...._-._~.....-~.~.-..---~~....-..-..-..~.~--~-.~...enter the year with 2 digits. [87]: 1987year i~~“~‘~“~~“““““““““~.“-~‘-‘.““~..~“.”~””’.“””.’~~‘. until the desired month is displayed ,_.._.________..__.__.._..._.-~-........__.__...______.__ enter the day with 2 digits ,._...._____._._____..~~~.~~....._____.__ until the desired day of the week is displayed ,..__..._____.........__.. ’ enter the hour with 2 digits ;.‘...‘..““~‘.‘ enter the minute with 2 digits r.
1 AB=[OO]: speed access code 00 [99]: speed access code 99 CD=[ r 91: nutotnatic line access number [81]: line access number of CO 1 [86]: line access number of CO 6. A--- tWJWP+W 01 FiyJ[phone number][MEyORY][END] -[SELECT]--------I I-------- until rhe desired speed access code appears [AUTO][NEXT][N][CD][phone t- number][MEMORY][END] Description 4. 100 phone numbers each with up to 32 digits may be entered into programming for speed dialing use from each exretuion.
Conditions 8. Repeat steps 4 to 7. Use the “+‘I, or “Q” button for scrolling the display. eThe line access number (9 or 81 through 86) should be stored. o When dialing, the pause is automatically entered after line access number (9 or 81 through 86). econtinuous use of speed dialing is possible. Example: [AUTO] [Ol] [AUTO] [02] In this case, speed access code “02” should not include the line access number. l 9. To exit from speed dialing entry, press the END button. eThe LCD will show .
Examples 1) To enter line access number 81 and telephone number 201-392-4669 into speed access c&de 00. (OJ NEXT -7 00 81- 201-392-4669 i i Teleihone Speed access ! number code line a’ccess number aIf MEMORY punctuations are not entered during (00: 812013924669) 2) To enter automatic access code 02. END) a phone number, the LCD will show as below.
Console 1 extension number Telephone extension number paired with console 1 I ,-. . . . . . .. . . .._.____......._.................... CD+ 11: orl extension11 I [26]: on extension 26 Console 2 extension number EF=[12]: on extension 12 Telephone extension number paired with console 2 [02][NEXT]i Y,‘r ..
D&xription Conditions l DSS console can be connected up to two. 0 DSS console can not be connected in pair wit a standard telephone. 0 DSS console can not be connected at extensio 11. If a DSS console is used the extension number paired with the DSS console should be assigned. Programming 1. Dial (02) “DSS CONSOLE Example: If Mr Jay’s secretary has KX-T61630 at extension 12 and is to use the DSS console (KXT&640), the console should be connected to extension 13. (Paired extension is ext. 12.
r :_.~.*~--~.~~ Ltrrtil the desired CO number appears : ;_ _____ .__ ____ [03] [NEXT] [w] [SELECT] [MEYORY] T or [END] I [03] [NEXT] [Al [SELECT] [MEMORY] [END] A=*: to &sign the same on all 6 CO’s 1: 0nCOI Description Conditions You can program which outside line is con?, netted and which one is not connected. . When an extemion automatically selects ali idle outside line, the extetlsioll can be connected to it quickly. l :: Programming 1. Dial (03). “CO CONNECTION” 2.
I~-~~---~-~~~--~ until the desired CO number appears [0orq][NEXT] [Al [SELECT] [MEMORY] [END] pI’[+$]: Conditions Description Allows the user to select rhe dialing mode (tone or pulse) of each CO (Central Ofice) line. *TONE Dial Mode The dial signal from rhe extension (ivith tone or pulse dial mode) will be converted to TONE. TONE will rhen be transmitted to the Cenrral Office. l PlJLSE Dial Mode The dial signal from rhe extension (with tone ot p&e dial mode) will be converted to PULSE.
;-e-o --.-...__...... _._._._._-_..___ -._- _..-_._. a. : - [05] [NEXT] [SE&CT] [MEMORY] [END] Description Conditions Allows DaylNight service to be selected manrtally or automatically. In case of manual switching, refer to “Flexible Night Service” page 4-39. When the Switching mode (Day/Night Service) is set to “AUTO”, the present DaylNight Service mode will not change after you finish programming. To change the present mode, manual operation is required.
‘._-...__-_-_.....-......-.-... A=[011 (o’clock):, $arting time for day service [ 121 (O’cfock) .~.~~~~~~~~~~~~~-~~~. B=[OO] (minute) . . . . . . . . . . . . . . . . . . default [O:] (minute) [59] (minute) I .-- . ..__.__ until the desired mode appears AM . . . . . . . . default PM C I.. 1 ~~~~~~--~. C=[OI] (o’clock): [+I (o’clock) starting time for night service . . . . . . . . . . . . default [1’2] (o’clock) D=[OO] (minute). [Ol] (minute) . . . . . . . . . . . . .
Conditions Description If you select the automatic switching mode for daylnight service, enter the starting time. Refer to “Switching Mode (DaylNight Service)” page 3-12. Programming 1. Dial (06). “DAY/NIGHT TIME” elf the NEXT button is pressed at step 3 through 7, the display will advance to the “Night Time input” mode (step 9). The operations of step 3 through 7 are not stored. l if the PREV button is pressed at step IO through 14, the display will return to the “day time input” mode (step 2).
;------------until the desired extension number appears ; .. .‘. ;-v’m’---- ,dial the CO number ..j !23&56+.;.. ,. il(CLEAR) ‘, [07] [NEXT] [NEiT] & t PO:] [NEXT] [AB] [C...E] - .,. [MEMORY][END] [MEMOFiY][END] ‘“--“-‘--‘---““-----~ AB=[*]: to assign the same on all16 extensions Description Conditions Through programming, you can select which extensions may be used for outward dialing by using the day mode of operation.
... . ..until the desired extension number appears [08] [NEXT] ;8] (N:XT] [C...El [NEXT] [ABI [C...E] [MEM,ORY][END] [MEMORY][END] to assign the same on all 16 extensions Description Conditions Through programming; you can select of which extensions may be used for outward dialing by using the night mode of operation. n Programming 1. Dial (08). “NIGHT: OUT :! CO” When you start the programming from step 1, you may dial the desired extension number instead of the NEXT button at step 3.
O--------utltiIthe desired extension number appears ,---.-.-.” ‘dial the CO number . . . . . . . . . . . default (all 16 extensions) [09] [NEXT] [NEXT] [C..‘.E] [MEMORY][END] f or [09] [NEXTI [ABI [C...E] [MEMORY][END] ~.~-~.~~~.~~~~~~~---~-~~~ AB=[%]: to assign the same on all 16 extensions Description Conditions 0 When you start the programming from srep I, you may dial the desired extension number instead of the NEXT button at step 3. eThe PREV button allows.
~~-.~-.-.-~~-until the desired extension number appears 1’ i . .._........ .‘dial the CO number . . . . . . . .-1. default (all 16 extensions) (CLEAR) .. , : --~---..~~~~~-~~~~~~-.--~~AB=[*]: to assign thesame on all 16 extensions Description Conditions Through programming, you can select which extensions will ring during the night time on incoming calis from the Central Ofice. When yen start the programming from step 1 you may dial the desired extension numbed instead of the NEXT button at step 3.
i’ --.-until the desired extension number appears [ll] [NEXT] [NEXT] [SELkTJ ;‘1, [NEXT] [AB] [SELECTI [MEMORYj[END] [MEMORY][END] ...--.--._-..-.--. AB=[++C]: to‘assign thesame on all 16’extensions Description Programming Use; to prohibit selected extensions from making long distance calls. Toll restriction can help eliminate telephone abuse and contribute to controlling telephone costs. There are four service of classes available for each extension. 1 I Service Class Selections I 1.
Conditions When you start the programming from step 1, you may dial the desired extension number instead of the NEXT button at step 3. @The PREV button allows you to go to the previous e.utension for displaying the service class assignment. l In some areas a “1” is needed before dialing tht area code for long distance call. If your area does not need to dial a “I”, the Programmable Toll Prefix should be set to “WITHOUT 1’. Refer to “Programmable Toll Prefix” page l 3-22.
, : : : : : ,___________...._....... area code with 3 digits : : NOTSTORED . . . . default (all memory locations) ; : (CLEAR) : -[12][NEXTI[*~][C][MEMORY][END] +SELECT]-I .---..--------------until the desired memory location number appears Description d For Service Clnss 3 (see “Toll RestrictionClass Assignment” on pflge 3-19.), up to 10 area codes can be selected for use in toll dinling. All clrea codes except those entered will be denied.
until the desired mode appears [13] [NEXT] [SELECT] [MEMORY] [END] Programming Description Set to “WITH 1” for Toll Restriction in areas where you are required to dial 1 to toll calls (long distance). 1. 2. Example: You are required to insert a “1” before di@ling the area code for long distance calls. . 1” in area where a “1” will be displayed. Press the NEXT button. “WITH 1” will be displayed and blink. 3.
:----until the desired extension number appears [14] [NEXT] [NEi(T] [SELkCT] [MEMORY] [END] t or [l4] [NEXT] [AB] [SELECT] [MEMORY] 7 ‘AB=[%]: [END] to assign the same on all 16 extensions Conditions Description Through programming, you can select of which extensions may dial an Operator Call. To deny all dialing that starts from “O”, set to DISABLE. 0 When you start the programming from step 1, you may dial the desired extension number instead of the NEXT button at step 3.
......:....._________________________ Description Conditiorts @Directory assistance dialing can not deny service class 1 and 2 of Toll Restriction. Through programming, you can select which extensions may be dialed Directory Assistance “411”. For to deny the directory assistance dialing, set to RESTRICT. n Programming 1. Dial (1.5). “DIRECTORY Example: o To prohibit ASSIST” will be displayed. 2. Press NEXT button.
;----------------.u,Iril the desired extension number appears .;-w.‘-- until the desired mbde appears AUTq.$NS,WER . .. . . . . 1 . . . default (iili6 +f&r; gNs~,ji~~. ,-: .: ,>;:,,-. i : : ) .Y: : ,: : [16] [NEXT] [NEXT] t [:;I [SELECT] [NEXT] [ABI [SELECT] [MEMORY][END] i to assign the same on all 16 extensions Description Conditions By programming either automatic or manual answering can be set.
;~~---.~~~~~ until the desired CO number ;;] appears [NEXT] [A] [A... D] [MEMORY][END] ._________._____.___.._____... A=[*]: to assigll the same on all 6 CO’s i Description If the system, 6. Repeat steps 3 to 5 to program CO’s of the KX-T61610. (KX-T61610) is installed behind a host PBX, the host PBX may require a pause time to access Central Office Lines. This feature enables the host PBX to automatically pause via programming the outward dialin !: access codes of the host PBX. each of the 7.
:-----------.1&l the desired extension number appears [18] [NEXT] INEkT] [SE
,___.......____until the desired extension number appears ;.............. .until the desired mode appears EX-OFF, CO-OFF. . . . default (all 2,$ extensidns) EX-ON, CO-OFF .,. ,’ ; EX-OFF,‘CO-ON EX-ON, CO-ON ~--~..~~--.-..~~.~~..~~-----~ AB=[*]: to assign thesame on all 16 extensions Description 5. Press the MEMORY button. The LCD will stop blinking. During a conversation, a call waiting tone will be heard when a third party on an outside line or intercom calls you.
. . .._..........._._.._ until the desired extension number appears .I .- dial the CO number (none). . . . . default (all 16 extensi&ns) .’ .I -~- l l .-.a, l AI [20][NEXT][NEXT][A...F][MEMORY][END] 1 or 1 [20][NEXT][AB][A.. T .F][MEMORY][END] Description The ringing start time can be delayed on a designated extension(s) when an incoming call is received from the CO. The CO line(s) that you want to delay the ring start titne can be selected through the programming.
.._..........__.....__._____ until the desired mode appears . AFTER 1 RING’; . . I.. . . . I.. . II. :.y;-fL: .default : ,. :;& : ..’ . i [21][NEXT][SEI LIECT][MEMORY][END] Programming Description After you select the CO lines that you want to delay the ring start time, select the desired delay ring count. Refer to “Delayed Ringing Assignmerit” page 3-29. 1. Dial (21). “DELAY RING played. COUNT” will be dis- 2. Press the NEXT button. “AFTER 2 RINGS” will be displayed and will blink. 3.
,.........__ unril the desired extension number appears ,‘r.‘:: ~___________.. -..:: _“.! .. ‘until. the desired mode appears T0.N.E CALL. . . . . . . . . . default (all 16 extensions) [1VOICE CALL [22] [NEXT] @& [SELiCT] t r”:;] [NEXT] [MEMORY][ENDl I [AB] [SELECT] [MEMORY] [END] Conditions Description When you start the programming frotn step 1, you may dial the desired extension number instead of the NEXT button at step 3.
I----.ut~til the desired extension number appears I : until the &sired combination appears D-PHONE 1,2 . . . . . . . . default (all 16 extensions) D-PHONE 1 D-PHONE 2 (deny the ringing) j D-PHONE. i------ 1 [23] [NEXT] F ;3] l [SELECT] [NEXT] [AB] [SELECT] l [MEM,ORY][END] [MEMORY] [END] ,________________.__.
---.-----.rrnril the desired exrension number [24] [NEXT] [NE m] [A...Dl t or 1241 [NEXT] [MEM,ORY] [AB] [A.. .D] [MEMORY] appears [END] [END] AB=[*]: to assign thesame on all 16 extensions Description 6. Repeat steps 3 10 5, to program Pertnits an extension user fo answer othet ringing telephones, provided that they are in the same pickup group. the assign. men1 of fhe other exretisions. 7. To relrcrti lo the initial program the Eh’D burron. mode, press Programming 1. Dial (24).
j____.__.____...... until the desired extension number appears -“.‘--.-‘~.---‘-~“.“.. 1 -.: until the desired mode appears -.OPTION. . . . . . . :. .(. . ;‘. default / [*5][NEXT]pipsELECT][MEMyY][END] OY [25][NEXT][AB][SELECT][MEMORY][END] 7 to assign the same on all 16 extensions Description This feature gives each message of the SMDR an account code of the called or calling party. .. This feature has two modes “FORCED” and “OPTION”.
.__._.....__.____.._~-.~.~~.... until the desired time appears ‘. ‘.. .. I INSTANTLY . . . : default 5s AFTER DIAL CIOS AFTER DIAL [26] [NEXT] [SELECT] [MEMORY)[END] Description Example: 10 seconds after the dialing =[26] (NEXT] [SELECT] [MEMORY] The duration time of the conversation is displayed. Program the start time of the timer. oInstantly after the CO line is captured. 05 seconds after the dialing *IO seconds after the dialing Programming See page 6-18. Programming 1 s Dial (26).
Description SMDR is a cost saving feature that records on a printer a record of all incoming following information is provided on the printout. The SMDR will print out the security code of the long distance service. (MCI, and outgoing SPRINT calls. The etc.) NOTE: When plugging a printer into the KY-T61610 make sure that the printer power is off. Select the SMDR Communication Parameters, System Data Dump and SMDR IncominglOutgoing for proper operation.
(Word length) Continued from page 3-36. ;............................‘.....”’..---’ [NEXT][SEiECT][MEMORY] ,~I until the desired length appears. 1 I (Parity) . . . .. until the desired mode appears _____.______.._____.___.........-.. .default - [NEXT][SE&CT][MEMORY] (Stop bit length) i .___________........:. .. . . .. . .. .. . . y\ until the desired mode appears - [NEXT][SE&CT][MEMORY] 1 (Page length) ,____.______.______.~....................... AB=[4] [& (lines) . . ; .
A word length code indicates how many bits compose a character. A new line code indicates what type of code is needed for the print head on a printer to move the first character position on the next line. CR+LF when “CR+ LF” is required from a printer. CR when “CR” is required from a printer. 7 BITS (when 7 bits are required.) 8 BITS (when 8 bits are required.) i A stop bit length code indicates the end of a bit string which composes a character. CR= Carriage Return LF= Line Feed.
12. Repeat pressing the SELECT button until the desired parity code is displayed. The skip perforation code indicates the number of lines to be skipped. When the print head reaches the line designated, the print head moves to the top position of the next page. 13. Press the MEMORY button. The LCD will stop blinking. 14. Press the NEXT button. “STOP BIT: IBIT” will be displayed and the “IBIT’ will blink. 0 (print head does not skip.) 1 (print head skips the last line.
Conditions The following EIA SIGNALS: combinations are disallowed. stop bit length Frame Ground (FG); Connects to the unit frame and the earth ground conductor of the AC power cord. Transmitted Data (TXD); . . . . . . . . . . . . . . (output) Conveys signals from the unit to the printer. A “MARK” condition is held unless data or BREAK signals are being transmitted. Received Data (RXD); . . . . . . . . . . . . . . . . . . . . (input) Conveys signals from the printer.
*STOP OUTPUT j----.----------------.--until the STOP OUTPUTappears [28][NEXT][SELiCT][MEMORY][END] *SYSTEM PARA aSPEED DIAL *ALL PARA (Master) until desired data dump mode appears SYSTEM PARA . . . . . . . . . . . . . . . . . . . . default co PARA EXT PARA SPEED DIAL ALL PARA : STOP OUTPUT [28][NEXT][SE t *CO PARA (Outside) ...__..__.._............ until the CO PARA appears 8 . . . I . A=[*]: [l]: .
Description Five separate printouts are available.
Operation When the CO Parameter is printed; To stop the printout; 1. Dial 1. Dial (28). 2. Press the NEXT 2. Press the NEXT button. 3. Repeat pressing the SELECT button STOP OUTPUT is displayed. 4. Press the MEMORY “STOP PRINTING :’ ‘:. (28). button. 3. Repeat pressing the SELECT “CO PARA” is displayed. until 4. Press the MEMORY “ENTER CO NO” button. !!” will be displayed. button until the button. is displayed. 5. Dial the CO number. SMDR printer will print out.
until the desired mode appears Description It is possible to print eithe; outgoing out&de calls, incoming outside calls or both. OUTGOING: OUTGOING: INCOMING: IMCOMING: Programming n ON.. . to print outside OFF.. . to stop ON... to print outside OFF... to stop outgoing calls printiq becoming calls prirzting 1. Dial (29). .. “DURATION LOG” will be displayed. 2. Press the NEXT button. “OUTGOING: ON” will be displayed alld the “ON” will blink. 3.
‘. : . until the desired time appears [30] [NEXT] [SE
until the desired time appears ’ 30 SEC-- ; , . . . . ‘: . . default 1 MIN ; .,., ., 1.5 MIN ._.., ; -: 2DISABLE MJN .: i.‘. ‘- -~ : [31] [NEXT ‘1[SELECT] [MEMORY] [END] Example: I.5 minutes: Description When the handset of the holding extension is replaced back on call, you may have the automatic hold recall after the desired time elapses. The hold recall titne set can be removed ot added at the customer’s request. [31] [NEXT] [SELECT] [SELECT] [MEMORY] [END] Programming See page 6-20. Programming 1.
I-““““-~‘.~‘“‘“-.-‘-’ [32] [NEXT] [SELECT] [MEMORY] until the,&sired mode appt& [END] Example: Description To elitninare The acktloj\)leti,oe four rhar is heard nfrer nccessitlg Ilie external pagitlg cat1 be retnol~ed ot added ciI rlie cusIot?ier’s request. rhe paging access tone. [32] [NEXT] [SELECT] .j :i ; .!., ?! ..: Programming Table : ,. .: 5,:. -: -: Programming 1. Dial (32). “EXT-PAG eci. See page 6-20. ACIS-TONE” will be display- 2.
~~~-~~~--~~~--~~---~~.~~--~-~ il until the desired mode appears [33] [NEXT] [SELECT] [MEMORY] [END] 3escription When you dial on an outside line by speed dialing, the dialed number can be kept secret by not being displayed. (The dialed number will not be displayed on the LCD of the KX-T6163O/KX-T30830.) h Programming 1. 2. Dial (33). “SECRET played. SPEEDDIAL” Press NEXT button. “NO SECRET” will blink. will be dis- be displayed and 3.
:.-.......-.----- until the desired CO number appears until the desiredflash timing appears :. [34] [NEXT] [NEI(T] [SELECT] or [MEMYRY] [END] [34] [NEXT] [A] [SELECT] [MEMORY] [END] I~~~~~~~~~-._.._.~-~~-~-~---~~ A=[*]: to assign the same on all 6 CO’s --/- Description Conditions The timing of the hookswitch flash signal must be within the requirements from your Central Office. There are three choices available 0.3, 0.6 or 0.9 second.
,_._._..__._until the desired CO number appears [35] [NEXT] ,Ni+XT] [SXECT] ;] [MEkjORY][END] [NEXT] -[A] [SELECT] [MEMORY][END] ‘--..-...-_..-.--..-.--..... A=[*]: to assign the Same Description 011 all 6 CO’s 6. Repeat steps 3 to 5, to set the disconnect time for the other CO’s. A certain amount of time is needed for an outside call to be released, this is necessary so that a new call may be aitempted after disconnecting with the previous call. There are two choices available, 1.5 and JO 7.
I....-.until the desired CO number appears [36][NEXT][NEXT][SELECTj[MEMPRYJ[END] f I or [36] [NEXT] [A] [SELECT] [MEMORY] [END] --7- 6. Repeat steps 3 to 5, to program ment of the other CO’s. Description To detect that an outside party has hung up and then terminate the outside (after a conversation, conference etc.) a CPC signal is needed. CPC signal detection can be removed or added at customer’s request. 7. To return to the initial program the END button.
until the desired mode appears .” [37] [NEXT] [% ciZCT] [MEMORY] [END] Programming Description 1. Dial (37). “DSS BUTTON Outside calls can be transferred to any extension manually. @“WITHOUT TRANSFER” mode you can transfer outside call by pressing the TRANSFER button and then DSS button. .. l “WITH TRANSFER” mode you can trqsfer outside call by only pressing the DSS button. ., MODE” will be displayed. 2. Press the NEXT button. “WITHOUT TRANSFER” played and blink. will be dis- 3.
until the desired mode ajjtars [39] [NEXT] [SELiECT] [MEMORY] [END] Programming Description 1. Dial (39). “XFER RECALL When a call is transferred to any extension, if other extension does not receive the transferred call within 30 seconds, the call will return to you. The time may be changed to 2 minutes. TIME” will be displayed. 2. Press NEXT button. “30 SEC” will be displayed and blink. 3. Press the SELECT button to alternate between “30 SEC” and “2 MIN” to select the desired mode. 4.
.-----.---------.until the desired extension number appears ,_______._..........-~.until the desired modi appears ‘I’,:.: >f;-FEATURE KEY.. ; . . . . :. default’(all16 FWDIDND KEY : [40] [NEXT] [NiXT] ;] [SEIECT] [MEM,ORY] [END] [NEXT] [AB] [SELECT] [MEMORY] .. . .._.___. ..___ .__ _. [END] __ __________.___ to assign Description the saf?le on all 16 extensions 4. Press the SELECT button to alternate between FEATURE KEY and FWDIDND KEY to select the desired mode.
DETAILED FEATURE LIESCRIPTION AND OPERAYONE KXJ61630, _-_ TELEPl ----.~ ~_ TION FOR EMSS PROPRIETA.RY 3' KX-T61620- KY-T61650. -', ---_ - -.- - - - I KX-T3Oi -~~~.. - 930,KX-T30820,KX-T 0850) TO operate this system, after making program changes, set the System (Electronic Modular Switching System) to the SET position. When the unit is unused, the Liquid Crystal Display will show the month, day and rhe present time.
H Individual Line Access Using the Handset cl WXY -9.. LIFTTHEHANDSET ORPRESS "SP-PHONE" DIAL"9" DIALTHEPHONE NUMBER WAITFORTHE DIALTONE TALK C.O. I I LIFTTHE HANDSET PRESS "CO" WAITFORTHE C.O. DIALTONE DIALTHEPHONE TALK HANGUP HANGUPOR PRESS "SP-PHONE" Hands-free Description Each extension can auromatically CO (Central Office) line KX-T61610. select an idle within the PRESS “CO” WAITFORTHE C.O. DIALTONE DIALTHEPHONE NUMBER Operation 1.
q Individual Line Access m. pJ LIFTTHEHANDSET ORPRESS "SP-PHONE" PRESS "AUTO" DIAL THESPEED ACCESSCODE (OOthrough99) L LIFTTHEHANDSET ORPRESS "SP-PHONE" DlAl "8" DIALTHECO NUMBER (1 through 6) Description There are 100 memory locations of system speed dialing available. DIALTONE NUMBER Operation OR PRESS "SP-PHONE" 1. Lift the handset or press [he SP-PHONE burron. Description Any of the 6 CO lines may be selected by dial access. 2. Press the AUTO 3. Dial the speed access code.
Programming Be sure the handset is in the cradle and the SP-PHONE or MONITOR *Set the MEMORY switch of the KX-T61630, KX-T61620, KX-T61650, KX-T30850 to “PROGRAM”. button is OFF. KX-T30830, KX-T30820 l w To Erase after Programming q Storage PHONE NUMBER "PROGRAMMABLE FEATURE" "PROGRAMMABLE FEATURE" '-MEMORY" the MEMORY PRESS "CLEAR(TRANSFER)" INSTEADOF "MEMORY" "MEMORY" button is used as the CLEAR After programming all the numbers, switch‘to the “SET’ return position.
Description Dialing There are 12 memory locations for automatic dialing available. Up to 32 digits can be srored into each of the 12 tnetnory locarions. Pushing [he “*Jc”, “#O, “-3s) “FLASH” or “PAUSE” button counrs as I digit. l For your convenience, program pri\*are phone numbers into the KX-T61630, KX-T61620, KX- T61650, KX- T30830, KX- T30820 or KX-T308JO. 1. Lift rhe handset or press rhe SP-PHONE butron. 2. Press a programmable burton.
Description Calling doorphone 1 LIFTTHEHANDSET ORPRESS .'SP-PHONE" I Calling DlAL"31" door-phone 2 A disbrzcbve dial tone will be heard from he hnrldset if rhe esrmsion user has prel~iously acfivared a special fearure. Operation WAITFORTHE CONFIRMATION TONEAND THENTALK. None Conditions There are two types of dial tones. Dial lolIe I: ordirlary dial tone I I LIFTTHEHANDSET ORPRESS "SP-PHONE" DlAL"32" WAITFORTHE CONFlRMAllON TONEAND THENTALK I call be Operation Dialiq fo rhe doorphoties 1.
- WL”n Setting honr.irin .. &or outssrde (trunk) calls HEARABUSY TONE CONFIRMATIONS TONE OFZBEEPS WILLBE HEARD HANGUPOR PRESS "SP-PHONE" -- r0rc1lLfor ca,nIJ-ot~ .,I.. LIFTTHE HANDSET DRPRESS "SP-PHDNE" Whet7 i17terc0171 For inierc&n calls EXTENSION NUMBER (11 through 26) n HEARABUSY TONE CO:NFlRMATlON TONE OFZBEEPS WILLBEHEARD PRESS "SP-PHONE" YOUWILL IiEARTHECO DIALTONE C(llh LITTTHEHANDSET ORPRESS "SP-PHONE" YDUWILLHEARTHE RING BACKTONE -- -__I __.
-- YOUWILL HEARABUSY TONE DIALTHE EXTENSION NUMGER LIFiTHEHANDSET ORPRESS "SP-PHONE" OIAL "1" ANDWALTFOR AN ANSWER PRESS "LNR" Description Descriptior2 The last photle tlilttiber dialed 011 atz outgoing call (CO line) cat1 be redialetl. If rhe estemiot7 you hnvi: dialed is busy. yorr calf irlfortn that exretrsion [hat morher itrtercottl cali is waiting by three beeps. For use of [his feature, the other extension is requited to be set for this feature beforehand in the KX-T61610. Opercrtion \ 2.
Setting TO cancel , L.I LIFT THE HANDSET OperatiolYz ,.,Lift rhe hnttdser PRESS “AIJTO ANS” (INDICATOR WILL BE LIT) PRESS “SP-PHONE” f’RESS “AUTO ANS” (INDICATOR WILL GO OUT) Description or press llze SP-PHONE Allows extension user I0 cmswer 1117ititercom call in the au~omnlic hntlds-free mode rvitliollr iirly operaiion when receiving ~112 itilerconi call. brluotl. @?Vhen he “‘Autotnntic At7swering Selecrion” fetrhrre has been selected lo the L’mcirluc~l” mode in the KX-T6.
LIFT THE HANDSET ORPRESS “SP-PHONE” DIAL "40" LIFF THE HANDSET OH PRESS “SP-PHONE” Description DIAL “4” OIALTHE RINGING EXTENSION NUMBER (11 through 26) Descriptio 11 An exrension user cm mswer ally ritlgrtlg esiension within their O~II pickup group. An estemioti ,tln), atmver (111itlconliq call flm~ is ringitlg at mother e.vtcs/rsiotl regardless of the picklrp group. Operation Operation 1. Lift rhe hflndsel or press Ihe SP-PHONE bulton. 1. Lifi the hntldsct or pwss the SPyP/lIOtVE brrrtot1.
To retrieve a parked call at any extension -2:. LIFT THE HANDSET OR PRESS “SP-PHONE” DIAL “5” DIAL PARKED EXTENSION NUMBER --- -- Description Allo~vs any estensiotz user to retrieve a call (intercom or outside) on hold at any extetuiotz. Operation Whet1 atI intercom or outside call is otz hold. 1. Lift rite handset or press the SP-PHONE button at atly estettsion. Exatnple: Mark is ralkitzg’with extensiotz 15 0t1 his desk, and theta moves to atlother rootn placing the call on hold.
Description To answer c1 doorphone -. A differetlr ritlgitig pnttern is rmd to distitiglrish intercom cdls from itzcotnitlg outside cdls. Operation LIFT THE HANDSET Notie PRESS “SP-PHONE” Conditions Operation I. L.ift lhe hmdset burror]. A~itonlotic ritlg back for the canlp on feature will ritlg dijreretltly from the ritlgitlg OH ititercoin, outside, md doorphot~e cczl1.r.
To place a call hold: on PRESS To retrieve: (Outside calls on hold) ealt the holding extension (Intercom call on hold) @at the holding extension I CONFIRMATION TONE OF'2 BEEPSWILL BEHEARO PRESS"C0" PRESS "KM" @from atrother exrerisiotz efronz another extension PRESS"C0" DIALTHE HOLOING EXTENSION NUMBER OlAL"5" . .. uescrlptlon ,P wispy.I 1J you wanf wait, com ;. Calls sions. to r leave Conditiorzs yottr phone rtnattet7ded *An Intercorn hold can be activated on one extension only.
:t i ‘8 i, ‘! : .i i - To place a call on exclusive hold: To retrieve: - (Outside calls on hold) (Intercom call on hold) 1 PRESS "HOLD" PRESS AGAIN PRESS “CO” PRESS "KM" Conditions Description An intercom or outside call placed on exclusive hold can not be released by any extension other than the phofle which has placed the call on hold. @An Intercom hold can be activated on one extension only. @Air Outside call hold can be activated on six CO’S. @Ifa call i,.*2 Operation ‘- 1.
PRESS “CONF” CONSULT WITH THE 2N0 PARTY DIAL 2N0 PARTY NUMBER’ PRESS “CONF” To ten&ate one caller and talk to the other caller. elf bdth the confereflce parties are on the outside: Press the CO buttotl to talk to the desired party. DescriptiOn Allolvs fo; rip to a three party conference, (~-olttsidell-irisitle) (I-outside/2-inside) or (3inside). elf both the conference parties are on the extension: Press the ICM button. You will be connected to the first participant. Opeiyation 1. Press the CONF .
To terminate the original call and talk to the new caller. - WILL HEAR A CALL WAITING TONE TALK PRESS “CO” OR “ICM” WHOSE INDICATOR IS FLASHING CIUICKLY To place the original call on hold and talk to the new caller. elf both original call and new call are intercom calls: (The ICM indicator will change lighting intoflashing quickly when new call reaches.
To transfer after other extension answers PRESS “TRANSFER” DIALTHE EXTENSION NUMBER ANNOUNCE AND WAIT FOR AN AljSWER To transfer without announcing the other extension HANG UP OR PRESS “SP-PHONE” PRESS “TRANSFER” HANG UP OR PRESS “SP-PHONE” DIAL THE EXTENSION NUMBER To Retrieve the Call if the other extension did not receive the transferred call within 30 seconds after the call has been transferred, the call will return to ~0~1.
PRESS “HOLD” TO PLACE 1ST PARTY ON HOLD CONSULT WITH THE 1 ST PARTY CONSULT WITH THE 2ND PARTY DIAL 2ND PARTY PRESS “KM” OR “CO” WHOSE INDICATOR IS FLASHING SLOWLY PRESS “HOLD” TO PLACE THE 1ST PARTY ON HOLD PRESS “CO” OR “ICM” WHOSE INDICATOR iS.FLASHlNG SLOWLY PRESS “HOLD” TO PLACE THE 2NO PARTY ON HOLD CONSULT WITH THE 2NO PARTY ,, Descriution -:) -. Allotvs an 8. Press the ICM or CO button whose indicator is flashing extension user to alternate between a CO party and an Intercom party.
To access PRESS "HOLD"T0 PLACE 1STPARTY ONHOLD L-cc&d .PRESS "HOLD"T0 PLACE ZNDPARTY ONHOLD .. : T--i CONSULT'. WliHTHE ZNDPARTY 2N0 PARTY LIFTTHEHANDSET dRPRESS "SP-PHONE" PRESS "HOLD"T0 PLACE ISTPARTY ONHOLO CONSULT WITHTHE 1STPARTY Description Allows an extension user to alternate between two intercom parties. Operation 1. Press the HOLD party on hold. button El Page will be heard only from the built-in speuker of KX-T61630, KX- T61620, KX- T61650, KX- T30830, KX-T30820 or KX-T30850.
0 access ror pickup ‘0 access group 1 LIFTTHEHANDSET ORPRESS "SP-PHONE" DIAL "35" LlFT'iHEHANOSET ORPRESS "SP-PHONE" CONFIRMATION TONE PAGE PAGE WAITFORAN ANSWER ANDTALK CONFIRMATION TONE DlAL"33" WAITFORCONFIRMATION TONEANDTALK f&i kage will be heard from exrernal paging equipmerft. For pickup group 2: At step 2 above, .d,ial36 instead of 35. For pickup group 3: At step 2 above, dial 37 instead of 3.5. For pickup group 4: A f step 2 above, dial 35 instead of 35.
To transfer a call to the paged person rbbl WHILE HAVING A CONVERSATtON r---l ?o answer I DIAL “34” LtFt THE HANDSET OR PRESS “SP-PHONE” “TRANSFER” ‘. PAGE WAtT FOR AN ANSWER DtAL “43” CONFlRMATtON TONE TALK “SP-PHONE” OYou may clial3.5, 36, 37, 35 or 33 instead of 34. i ji‘3 _ ,... Description A page from the built-in speaker or external paging equipment can be answered front atzy extension. Operation To transfer a call to the paged person; 1. You are in conversalion. 2.
To enable DIAL "7511" REPLACE THE HANDSET ORPRESS "SP-PHONE" DIAL "750~~" 3EPLACE THE iANDSET ORPRESS "SP-PHONE" LIFTTHEHANDSET ORPRESS "SP-PHONE" WILLHEAR MUSIC I. To cancel LIFTTHEHANDSET ORPRESS "SP-PHONE" Description Conditions .i Mu& from at7 extertlal source (e.g. radio) .catl be listetled to on the built-in speaker of the telephone.
To enable Be sure the SP-PHONE indicator is on. PRESS “MUTE” @The. MUTE indicator To Program Set the MEMORY switch of the .KX-T61630, KX-T61620, KX-T61650, KX-T30830, KX-T30820 or KX-T30850 to “PROGRAM”. Example: Paging All Extensions (Dial 34). will flash. To cancel PRESS “PROGRAMMk3LE FEATURE” DIAL “34” PRESS “MEMORY” After programming 6Ill! the system .fealures, return the MEMORY switch tc “SET”.
Call Waiting-Outside Line PRESS “FLASH” CONSULT WITH THE NEW CALLER WHILETHE ORIGINAL CALL IS ON HOLD PRESS “FLASH” Conditions Description Allows estension user to access feafures of the central o.fice or host ‘PBX. (example: call lcaiting feature can be supplied by central office. ) .. Call Wailing-Outside *“Flash” can be stored into tnemory in the . same way as “Storage” on page 4-4. Line I. While haviilg a con~~erscirion, another party ccills and a call waiting lone is heard. 2.
Forced Mode I$ Making a Call L LIFTTHET OR PRESS “SP-PHONE” , 1 PRESS “CO” I PRESS “FWO/ONO” “F3” : DIAL THE ACCOUNT COOE WAIT FOR THE C.O. OIALTONE DIAL THE PHONE NUMBER .:, •l Receiving a Call If you want to record a calling party’s account code in the SMDR, follow below-mentionedprocedure. ’ c.
-lsl Receiving a call If you want to record a calling party’s account code in the SMDR follow the below-mentioned procedure. Description This ~yeature gives each message of the SMDR an account code of the called or calling party. Station Message Detail Recording (SMDR) is cbst saving feature that records all incoming and outgoing calls through the CO line, t 1 This feature has two modes “Forced” and “Option”. In the “Force>” mode, the account code must be entered every time the extension user dials.
Inter Office Calling (Intercom) I I LIFTTHEHANDSET ORPRESS "SP-PHOtjE" HANGUPOR PRESS "SP-PHONE" TALK PRESSTHE DSSBUllON _----_-.____. Programming *Be sure the handset is in the cradle and the SP-PHQ.NE button is OFF. eSet the MEMORY switch of a pair telephone ‘(KX--41630, KX-T61620, KX-T61650, KX-T30830, KX-T30820 or KX-T30850) to “PROGRAM”. ! ,. ‘f y. ‘@ To Correct an Error while Programming leaStorage the CLEAR button, reprogram the correct number. oThe TRANSFER .button is used as the CLEAR.
El DSS (Direct Station Select) Button: mukes. the dialing to the extensions very easy. You can reach the extension party by simply pushing the DSS Button. 86: line access number q Programmable Feature Button: lets you access various features of KX-T41610 and speed dialing using the CO line in addition to the numbers programmed into the KX-T6161O’s memory. 3. Enter the phone I of CO6 button. 5. Repeat steps 1 to 4, to program programmable feature button.
(Extension 11 only) IFT THE HANDSET R PRESS SP-PHONE” DIAL THE PHONE NUMBER Description DIAL “77” ENTER THE HOUR (01 through ENTER THE MINUTE’ (00 through 12) 59) . When rhe dialing mode is required to change a pulse mode to a tone mode in one dialing sequence, this feature is used. (e.g. computer-accessed lollg disrailce service ) Operation 1: for PM : 1. Dial the phone number. (prrlse Inode) 2. Dial (++ #). 3. Dial the phone number. (tone nlode) ,; ; ‘i. . . :.i: :.
.-. - Setting HANGUPOR PRESS "SP-PHONE" DIAL"721#" LIFTTHEHANDSET OPrPRESS "SP-PHONE" To cancel : PRESS "KM" LIFTTHEHANOSET ORPRESS "SP-PHONE" HANGUPOR PRESS ,) "SP-PHONE" OIAL"720#" .. :. dialing through CO line J WAITFORTHE CO.DIALTONE LIFTTHEHANDSET ORPRESS "SP-PHONE" h Dialing Description Can access any CO line which is not in directly by picking up the handset or speakerphone on and tell an extension which line is accessing by lighting the CO indicator. ..’ .; 1 ;..A . F.
@Be sure the handset is in the cradle and the SP-PHONE button is off. l Set the MEMORYswitch of the KX-T61630, KX- T61620, KX-T616.50, KX- T30830, KX-T30820 or KX-T308.50 to @Be sure the handset is in the cradle and the SP-PHONE button is off. *Set the MEMORYswitch of the KX-T30830 to “PROGRAM”. - Setting "PROG&iiw.
LIFT THE HANDSET OR PRESS “SP-PHONE” DIALTHE EXTENSION NUMBER .- Description Switching to tone alerting Lamp indicators corresponding to the status of the CO (Central Office) and the ICM (Intercom) buttons. Explanation CONFIRMATION TONE IS HEARD l ICM indicator light RING BACK TONE PRESS “3~” Description “Voice alerting” (thibugh built-in speaker) that is,esrablished at the called party’s extension, can be switched to “Tone alerting” (ringing).
The elapsed time (from dialing to replacingthe handset) on originating an outside call will be displayed. In the event of a power failure each CO will be connected to assigned, extension. CO ,I is assigned to extension 1J. CO 2 is assigned to extension 12. CO 3 is assigned to extension 13. CO. 4 is assigned to extension 14. CO 5 is assigned to extension 15. CO 6 is assigned to extension 16.
Setting LIFTTHEHANDSET ORPRESS "SP-PHONE" DIAL "731s" LIFTTHEHANDSET ORPRESS "SP-PHONE" DIAL "730s" HANGUPOR PRESS "SP-PHONE" To cuncel Coditions Descl-iptiorz Allo\vs you to f rot77 ut7sbwritlg prohibit at7y cnlls otl7er directed estension to yollr estetzsior7 is in the “Dial Cull Pickup Derly” mode, you can place or receive olctside or intercom calls. II.TCI While you. Operation 1. Lift the 17m7dset or press the SP-PHONE b1ttrot1. 2. Dial (731#).
Setting: To cancel: FWQ/DNU El I LIFT THE HANDSET OR PRESS “SP-PHONE PRESS “FVID’DND” “F3” DIAL THE EXTENSION NUMBER HANG UP OR PRESS “SP-PHONE” Description DIAL “0” PRESS FWO DND” "F3" II HANG UP OR P RESS SP-PHONE” 3. Dial (0). Outside or irttercom calls to your extension curl be fotxiwrded to at7other c.vtetrsiot7 a1t(otnnricnlly, LIFT THE HANDSET OR PRESS “SP-PHONE” drlritig yoltr ctbset7cf.
oT17e tot7e (bllsy lone or do tzot clisrrirb tot7e eic.) r11e caller receii?es ciepet7d.r 017 rhe condiriot7 of ilze forn?arded cslet7siot7. @If extet7siot7 A is forwardit7g all cctlls 10 extemiott B atid R is forwardit7g 011 cril1.s to C. if any esrensiotz cnlls A I rhey will be cot7t7ecled to C. (If j-011 atlet77pr lo forward a crrll 10 (I forwarding extension, a reorder tone will be heard illstead of a confirmatiotz torte to prevetlt an endless loop.
Settinp LIFTTHEHANDSET ORPRESS "SP-PHONE" DIAL"10" PRESS "FWDIDND" "F3" HANGUPOR PRESS "SP-PHONE" To cancel LlFTTHEHANDSEl ORPRESS "SP-PHONE" PRESS "FWD:DNO" "F3" DIAL "0" HANGUPOR PRESS "SP-PHONE" Conditions Description Each estetuiorl cat1 be itldi~:idi~alIy progummed from receivitlg oirrside or ititercottl e W/let1 “Do For,varditlg” Tile progratntnable feature (F3 ot7ly) button of the KX-T61650 or KX-T30S50 cat1 also be used for “Do Not Distr&” if proglartming is done beforehattd in the KX-T
: Progratmning Wheti the cxlleci litie is bltsy or Ivhile yorr rare spetrkitlg oti Ihe CO Line; Setting I 1, I I I I IFT THE HANDSET IR PRESS ‘SP-PHONE- I DIAL “741 #” PRESS “SNR” PRESS “AUTO” Dialing SNR HANG UP OR PRESS “SP-PHONE” a Lh?i?%dSHANDSET OR PRESS “SP-PHONE” To Cancel I I I I .
(E.rretuiotl I I ot~ly) To enable night service: (To disnble day service) 11 LIFTTHEHANDSET ORPRESS "SP-PHONE" HANGUPOR PRESS "SP-PHONE" DIAL "782#" To disable night service: (To etlnble dny service) ki LIFTTHEHANDSET ORPRESS -+PtiONE'. HANGUPOR PRESS "SP-PHOkE" DIAL"781#" Operation Description Nortnnl Niglir s\‘stetti operNfiot7 is seI for cifiv rit77e. serVice nllo\c3 for rl7e 07~twmd diallt7g nt7d inconlitlg I. Lift tl7e hm7dset or press of esletlsiotl 11.
I I I I LIFT THE HANDSET OR PRESS “SP-PHONE” DIAL “79 +” , I HANG UP OR PRESS “SP-PHONE” Description Difllitlg (79 #) lvill clear the jbllorvitlg program otz an estemiotz. stariorl Backgrormcl Mllsic Cull For\varditlg Dtrta Litle Seciit-it) L>ictl Cflll Pickup Detf) Do tlot Distrtrb Auto CO Hunting Operutiorz 1. LifI rhe hcrtlclset or pt-css the SP-PHONE burtotl. 2. Dial (79#) ad wnit for n confirmation tone. “EXT DATA CLEAR” will be displayed. 3. Hang up or press the SP-PHONE button.
OPERATION FOR A STANDARD TELEPHONE (rotary and touch tone phones) Description Descriptiolz Srariott 10 srariotl dialirq si’sIettt. There are 100 tnetnory locariom of sysretn speed dialitlg available. \\firhitl rhe KX-T61610 Ope>ation LIFTTHE HANDSET A rdomatic Operation DIALEXTENSION NUMBER (11 through 26) LIFTTHE HANDSET DIALSPEED ACCESS CODE(OOthrough99) DIAL "s" is no tleed to access a CO line. oA rotary photze lvill trot function for speed dialing.
Description if the exterzsion you Description If the iiltercom csterisio~i or orraidc lilic> ~‘orc have dialed is buy, you will he (rlrtolllrllic.(rII~. called back \vhe,l the estemiolr or the orrr.vitIv liue becomes free rrsiug this f/rllctiolr. Tl7i.s ferirrrre is also kr70\\‘/7 us crrl77p-ol7. Operation have dialed is blisy, you call ir~form that esfensiou that another intercom call is waiting by three beeps.
Description Operation Allows esretuiotl uses lo retrieve a call (ititercot71 or ourside) oti hold fit atiy e,
Description Description If yO;l ,vish Calls lvaititlg fotie dlrritlg a cotl~~ersaIiot1 itidicates there is a tlew iticoming CO line call 01 Intercom call. This feature is required to be set beforehand itI the KX-T61610. For programming, see page 3-28. lo leave your phorle litlarrerldeti blrr want rhe caller you nre it1 cotiversaGot1 lvirli to wait, call hold may be used. Intercom atId outside calls may be placed otz hold.
Description Allows prrgitzg to a// exteirsiotis. Operation To Access LIFT THE HANDSET FLASH HOOKSWITCH DIAL EXTENSION NUMBER ANNOUNCE AND WAIT FOR AN ANSWER To Transfer without Amlou,lcing FLASH HOOKSWITCH DIAL EXTENSION NUMBER CONFIRMATION DIAL “34” HANG UP the Other Extension HANG UP To Retrieve the Call PAGE WAIT FOR AN ANSWEFi‘ AND TALK 0 Page will be heard ouly from tire built-in speaker of KX-T61630, KX- T&620, KY- T61650, KY- T30830, KY- T30820 or KY- T30850.
Description Operation Allows pagitlg to one of four groups. To Transfer a Call to fhe Paged Persotl Operation For Pickup Grorlp 1 FLASH HOOKSWITCH PLACEACALL ON HOLD DIAL “35” LIFT THE HANDSET ! ANSWER AND TALK BBll For Pickup Group 2: Ar step 2 above, dial 36 instead of 35. q For Pickup Group 3: At step 2 above, dial 37 instead of 35. H For Pickup Group 4: Atstep 2 above, dial 38 instead of 35.
Description Description “Voice alerting” (through built-in speaker) (hat is established at the called party’s extension, can be swirched to “Tone alerting” @nging). l This feature required to be set befot%hand in rhe KX-T61610. For programming, see page 3-31. eA rotary phone will not function. Allows exrension user to access features of the central office or host PBX. (example: ccl1 waiting feature can be supplied by central office.
q When you use a standard telepjone equipped with automatic dialer, be careful the followings: Example: Computer-accessed long distance service e Local access telephone number of (he alternate long distance service company 765-4321, Authorization no.0123456, Long distance no. 543-210-9576 ePulse mode is required by local access telephone number of rhe alternate long distance Service cotnpany. eService of MCI, SPRINT, hJlETR0 or other systems is used.
Description Option Mode This feature gives each message of the SMDR an account code of the called or calling party. Message Detail Recording (SMDR) cost saving feature that as records all and outgoing calls through the CO I1‘I‘C. q Making or Receiving a Call If you want to record a calling or called party’s ac?ou?f code in a SMDR, follow the belowmentioned procedure. Within 30 seconds after calling or called party hangs up, / This feature has two modes “Forced” and “Option”.
q You may dial “0” instead of pressing the “#“button. Description To Cancel All outside or itlrercotn calls lo your esretlsiotl cat1 be forwarded to atlorher estetlsiotl automnrically drrritlg your absence. Operation LIFTTHEHANOSET Setting DIAL"730 #" .‘. . LIFTTHEHANDSET DlAL"I" DIAL"71" OIALTHE EXTENSION NUMBER HANGUP HANGUP To Cancel Description LIFTTHEHANDSET DIAL"70#" Each extetlsiott cat1 be itldir~idually prog’vtmtned from recei\litlg outside or ittrercottl cnlls.
Description Description Dialing (79 #) will clear the fo~~owitIg programs on ati extension. This feature provides security whet1 tratlsmitting data through arz extension of the KX-T6I610. Call waiting or hold time retninder tone from KX-T61610 are prohibited in this mode.
Description To Dial Picking up the handset automatically programmed phone number. dials a \ PICKUPHANDSET FDR4-SECONDS Operation If the “Pickup Dial” feature does not work, hang up for over 1 second, and lift the handset again. To Prograln LIFTTHE HANDSET DIALEXTENSION NUMBER eA rotary phone is not available for Pickup Dial. *Dialing (speed dialing and manual dialing) is possible within 3 seconds.
TROUBLESHOOTING PROBiEM .’ Extension does not operate. j;.’ PRO&i&Ii CAUSE rad connection between FBvstem and exrension 1 POSSIBLE SOLUTION .. Take rhat extension and plug it into rhe same the cxtension port using a short relephone cord. J/f telephone does not work, conneclion between rhe cystem and rhe ex:rension musI be repaired, Set to SET except when programming. ‘he system program swifch is set to ‘ROGRAM. If the KX-T61610 : 1 telephone with an A-Al elay is connected.
1. Cotuzecliott beriveetz the Cetttra/ Office attd rhe KX-T61610 Catltlor make or receir,e calls 011rhe CO lit&. CO lines are connected rhe HIL. Recotltlect rhe CO lines to the T/R of the relephotle jack lrsing 2-conductor kviring. to .T .R ka CO line 2, Cotltlecfiotl bemveetl rile KX-T6I610 KX- T3OS30) PROBLEM Catltlor make calls ~~*lietirhe SP-Phone button on the KX-T61620 (atld KX-l-61630, KX-T3OS20, KX-T30830) is pressed. The SP-Photle itldicarot does nor light. 3.
.. ,,. .;.;.pR&&M.;.,. ,. ._’ -:. ..!~ : . 1, Extension does not operate. -I The Power failure switch of the KX-T61630 or KX-T30830 is set to ON. Set the Power failure switch to OFF. When using the speakerphone mode, nothing is heard. The HANDSETI HEADSETselector of the KX-T61630 or KX-T30830 is set to the “HEADSET” position. When the headset is not used, set the HANDSETI HEADSETselector to the “HANDSET” positior.. The unit does not rin.g. Ringer Volume Selector is set to “OFF”.
To set ____..._...-.__._.....until the desired D TMF receiver appears __ --TX [38] [NEXT] [SE ECT] [MEMORY] [END] To confirm Dial any extension (e.g.. .12) and listen for that extension to ring. Confirmation Description DTMF (Dual Tone Multi Frequency) Receiver enables tone telephones to dial within the system. To check the DTMF Receivers, activate the DTMF Receivers one at a time and confirm if the receiver can receive tone signals. 2.
Table of System Features The following systetn featurescatt be programmed Calling Doorphone Paging- ittto memory. 1 or Doorphone 2 External Paging All Extensiotls Paging Group 1,2,3 or 4 Dial Call Pickup 1 Directed Call Pickup Pagittg Attsl~er Call Park Rerrie1.e Carlcelling Call Forwardittg or Do Not Disturb Call Fotx~arclirzg Do Not Disturb Auto CO Hutzting Cancelling Auto CO Hunting .
LIST OF TONES I rence -, Feature activation Reol;der tdne Ringback Isec 1 .,, tone tone Do not Disturb tone ll-l -H-l l-l ll-l in -Ln Call on hold tone Alarm Hold tone time reminder Call waiting I ff JJ IS set ff II tone LIST OF RZNG TONES :., Recallfor - . .,;, campon -.
SPECIFKATION General Description 6 . . . . . . Outsides (CO) 16 Stations 2. Control Method . . .Stored Program CPU: 8 bits CPU, 4 bits CPU Control ROM: 64 KB, Control RAM: 16 KB 3. Stoitchitzg ..... .. . . . . . , Space Division CMOS Crosspoint Switch 4. Power Supplies . AC 120 V60 Hz . , . . . . . . Primary Station Supply Volt: -26 V, Secondary Circuit Volt: +5 V, +7 V, rtl5 V, -26 V Power Failure l 6 outsides assigrled to stations (I through 6) . . .power failure transfer e.
- TELEPHONEC0MPANYandF.C.C. REQV-IREMENTSANDRESPONSIBILITIES 4. Compatibility of The TelephoneNetwork and Terminal Equipment In compliance with the requiremenrs of Part 68 of the F. C. C. Rules and ~egularions for connection of terminal sysretn (rhis device is classified as terminal system) to the telephone network and for your convenience, the following information is presented: I. Not$cation Company (a) Availability formation.
OTHERS Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and television. These noise sources cm interfere with the performance of the EASA-PHONE. l l _ This unit should be kept free of dust, moisture, high temperature and vibration, and should not be exposed to direct sunlight. ONever attempt to insert wires, pins, etc. into the vents or other holes of this unit.
LIMITED . WARRANTY Panasonic Company or Panasonic Sales Company (collectively referred to as “PANASONIC’) will repair this product with new or rebuilt parts, free of charge, in the U.S.A. or Puerto Rico for one (1) year from the date of original purchase in the event of a defect in materials or workmanship. Batteries (if included)-New rechargeable batteries in exchange for defective rechargeable batteries for ten (IO) days from the date of original purchase. Non-rechargeable batteries are not warranted.
SERVICENTER LIST . To locate an Authorized Servicenter in Your Area within the Continental Requests for assistance in obtaining repairs or technical information.. Service Administration offices: NORTHEAST 2250 Cabot Blvd., West . contact any one of the following 215-741-0676 covers: MIDWEST 1703 N.Randeil Road, Elgin, IL 60123 708-468-5454 Covers: WESTERN 6550 Katella Avenue Cypress, CA 90630 714-895-7438 covers: CT, DE. ME, MD, MA, NH, NJ, NY, PA. RI. VT. VA, DC. WV, Eastern OH IL.
Panasonic Phone Number Directory .TELEPHONE -co NUMBER4 ” .TEL NO. NOTE 1 4 2 5 3 6 bEXTENSlON -,-,+L’,,O. _, :d,.. .:G::~;. _NOTE: .j’:.. -:I co :, ” NUMBER4 No. NAME NOTE 19 ,SPEED :\1 DIALING4 CODE NAME TEL NO. CODE\. 00 16 01 17 02 18 03 19 04 20 05 21 06 22 07 23 08 24 09 I 25 Ill i 1 12 -- 27 -. 28 13 14 . 26 10 I TEL NO.
Panasonic .
PROGRAMMING )stem Speed Iialing Entry IO11 [NEXT] [A:;O] +[SELECT] 1 (AB] [C,D] [phone number] [MEMORY] [END] [9]: auromaric line access number j ‘f [81] through [86]: omside line access number :--- speed access code [OO Ihrough 991 *There DSS Console Assignment 1021 is the phone riut77ber direciory 011 page [NEXT]-IABI [Ol WI 61 IEFJHI y LO31 [NEXT] cotlsole 6-12. [MEMORY1PJDl I I I - -- Telephone I f I I I ? Console 2 exrension I I I I I -.
[NEXT] [NEXTJ [SELECT] = ; ___ -__ mril [MEMORY] [END] CLASS 1/2/3/J the desired ex[etuion 6-15 number appears
:-To WYcl );;; ‘011 Restrictionlrea Code election ROCRAM DDRESS 1121 Memory location number 00 01 02 03 04 05 I 06 07 Area code entry ‘rogrammab/e ‘011 Prefix (131 [NEXT] (SELECTJ (MEMORY] ‘-----WITH11 wir/t I 1 Wirhoutl ‘rogrammable lperator Call ‘rogrammable lirectory lssisfance 1141 1151 [NEXT] [NEXT] Vosl PBX A ccess Codes Assignmer; Default x I I [I71 [NEXT] [NEXT] change I [END] ;----.
‘ “referred CO Line 4ssignment NEXT] 1 (NiXTl -y I [SELECT] [MEdORY] [END] . - - - - - . , . - (none)lCO llC0 2iCO until the desired extension number appears I--- Programmable Call Wailing [I91 :NEXT] [NEmOFlY] - Delayed Ringing Count Selection WI WI ,NEXT) EXT.-OFF, CO-OFFIEXT.-ON, t [A...F] [MEMORY] L_-- --dial I [NEXT] I- I 4/CO 5lCO 6 [END] j--..- Delayed Ringing Assignment 3/CO CO-OFFIEXT.-OFF, CO-ONlEXT.
.i:’ 1 D G roup JEXT] Assignment [NSXT] -7 I I I--- (A...
TOGRAM. DDRESS UDR ommunication aramelers [Stop bit length) ;NEXT$SELECq[MEMORv] i------l BIT12 BITS Lkfdf x I BIT 2 BITS To make progrnm change To makeprogrnm change (Page lengrh) [NEXTj[AB][MEMORY] --i-L------- 4 through 99 lines Default 66 (Skip I perforation) (NEXTj[AB][MEMORYj[END] ‘--------~Orhrough95lb~es To make program Default Skipping yyyslem Data Dump lines change 0 1 ..
&XA‘U DDRESS old Time winder t301 .:-., ‘JEXT] [SE,LECT] [MEMORY] I------ [END] I MINI2 MIN....../9 MIN I Default To rllnkeprogm,n ‘old Recall Df Time (311 NEXTj [SELECT] 2 ~321 NEXT] [MEMORY] 30SECIl [SE,LECT] NEXTJ 8 9 [END] MINII.
[NEXT] [SELECT] [MEMORY] ---K-Z-- WITHOUT [END] TRANSFERIWITH TRANSFER To make program change To make program change x ---- System Clear 1991 ENABLEIDISABLE [NEXTl(MEMORY][END] 6-21
Quick Q Reference Card for Standard B 6 Telephone / Quick *Inter [A rotary phone will *Calling doorphone For doorphone I: For doorphone 2: not function ofice Card for Standard I *Automatic call back busy: 0Busy stafion signaling: iiJ l Lnst number redial: m ormm l Callsplitring:] l Co,~fere,lce:rConsuIt 11st party is on hold *Call . extension no. m[extension no.
MODULAR SW ITCHING’SYSTEM K%T61610 ELECTRONIC Please read this Manual This first and then another Installation manual is available for KX-T61610 the mark 3 on the plate as shown BD . . MODEL NO. TELEPHONE L 0 Manual which below. for programming. has EASA-PHONE KX-i-61610 EDUIPMENT J Note: 1. For KX-T7020, 7030, 7050 and 7130, press the “STORE” key instead of “MEMORY” key. 2. For KX-T/020, 7030, 7050 and 7130, press the “AUTO ANSWER” key instead of “‘AUTO ANS” key. 3.
System Component Electrotlic Modular Telephone Optional equipttletlt Switchitzg System KX-T61620 KX-T61630 KX- T61650 KX- T30820 KX- T30830 KX- T3OS50 KX-T7020 KX-l-7030 KX- T7050 KX-T7130 EMSS Proprietary EMSS Proprie’tary EMSS Proprietary Eh4SS Proprietary Eh4SS Proprietary EMSS Proprietnry EMSS Proprietary EMSS Proprietary EMSS Proprietary EMSS Proprietary Telephone Telephone Tefephotle Telepfzotle Telephotte Telephotle Telephotre Telephotle Telephotle Telepftotle KX-T61640 ftX- T7040 KX- T30860
;ip * .\ TABLE OF CONTENTS .A :., ._. ;. Example of pro~r~~~~unin~ .................................. Added 3 Features < ConnecIiotl> The Parallel Cotmcctiotz of the Proprietary Telephone atld the Standard Telephone .............................. Connection of he Optional Door Opener Adaptor 6 (KX-T3OSG6) 7 ....... 8 Standard Telephone Cotutecliotl wirlz Proprietary Telephone .......... FLISAVE Selecliorl (for KX-TG1650, KX-T30550, KX-T7020, ; ......... KX-T7030, KX-T7050) ........
All the programming procedures described in the Installation Manual have been modified. Delete step 2; “Press the NEXT button” ft?tTl every fenture of the programining in another Installation Manual. See the example below-the portion that should be deleted is shown shaded. This manual describes the revised procedures front lvhich step 2 has already been deleted, as “Revision” below. ;.--...----a-. I :. : [8’6]: lip nccess rrrmber l][NEXT]&][~][phone t CD=[ I 91: ~ttroff~~ticIhe access,Irrrnber [81]: .
‘~v~~e,c he System Progranz Swilclz on he KX-T61610 isset 10 the PROGRAM atrd (he KX-T7130 cormecred to extensiora 11 will charzge as jollows. position, the operation of the KX-no.
. ‘.
a Any extension can be connected in parallel with the proprietary telephone and the standard telephone. ~ tire event of a power failrtre, CO 1 tkrolcgh CO 6 can be accessed using rhe standard telephones that are connected in parallel with proprietary telephones to extension numbers 11 through 1Grespectively. Iti •a If the extension receives a call, a ringing will be heard from the proprietary telephone auci the standard telephone.
For itlstallitlg ihe Door Opener, use ihe Optiottal Door Opener Adaptor 1. Wiritlg cotutec;totz from (KX-T30866). 2. Insert the door opener adaptor. the Door Opetlet @ Loosen the screw and remove the cover. Door Opener Adaptor (KX-T30866) @ Loosetz lhe screws. r , •( Block Diagram \ @ Insert the wires coming from the door openers in the direction of the arrows and lightetl the screws, then secure the cords with the cord strap (included). -Y Cord Strao Note: .
~-.----.-..------ulltil the desired extension number appears [37] [N&T] [SE&T] [MEMORY] [END] or [37] [AB] [SELECT] [MEMORY] [END] 13escriptioiz You can select whether the standard telephone which is connected in parallel with the proprietary telephone works or not. ENABLE..... DISABLE..... The standard telephone works. The standard telephone does not work. Programming 1. Dial (37). “ENTER EXT NO” will be displayed. 2. Press the NEXT button until the desired extension number appears.
I.-.-----.-.----.-~lntil the desired extension number appears [38] & [SELkCT] [MEMORY] [END] or [38] [AB] [SELECT] [MEMORY] [END] . 4. Press the MEMORY Descriptiort \ The SAVE button is riot provided with KXT61650, KX-T30850, KX-T7020, KX-T7030 and KX-T7050. Fl button can be chatlged from progranmable feature button to SAVE button. “FEATURE KEY” mode . . . progrutntnable feature function “SAVE KEY” mode . . . SAVE futlction button. 5.
,........___._.... until the desired extension number appears [40] [NEXT] [SELECT] [MEMORY] [END] or [40] [AB] [SELECT] [MEMORY] [END] I Conditions Description Through programmirzg, you can select which extension may barge in another extension that is in conversation with an outside party. Prograntmirtg 1. Dial (40). “ENTER EXT NO” ^ 0 If you start the programming Jrom step 1, you may dial the desired extension number instead of NEXT button at step 2.
:.-.--------...---utltil the desired extension nutnber appears [41] [N [C...H) [MEMORY] [41] -.[AB] [C...H] [MEMORY] ; . [END] [END] , .. .. . .. . ..._.._..____.__......... Description Conditions Through programtning, you canselect which CO Line is accessed automatically when you dial 9 to use the “Automatic Line Access” feature or you use the “Auto CO Hunting” feature. Program 172 ing 1. Dial (41). “ENTER EXT NO” will be displayed. , 2. Press the NEXT button.
,............._... until the desired extension number appears [42] [N [SELECT] [MEMORY] [END] or [42] [AB] [SELECT] [MEMORY] [END] 5. Repeat steps 2 to 4 to program the assignment Description of the other Through programming, you can change the Call Waiting Tone from Tone 1 fo Tone 2 shown below to prevent the user from missing the tone. Tone 1 is heard from the handset receiver of he standard telephone and the built&speaker of rile proprietary telephone.
1....-........--..utllil the desired extension number appears [43] [NEXT] [SEL&T] [MEMORY] [END] or [43] [AB] [SELECT] [MEMORY] [END] Description Conditions Alloyseach Whet2 you start the programming from step I, you may dial the desired extension number instead of NEXT button at step 2. l The P.REV button allows you to go to the previous extension for displaying the door opener assigtmetit. extension fo be programmed for unlocking the door. Up to 2 Door Openers can be cotmected to the system.
t......-..........ul’lil the desired location number appears [45] k&j [MEMORY] [END] or [45] [AB] [C] [MEMORY] [END] Description Through programming, up to 5 carrier codes to access OCC (otller common carrier), etc. can be assigned. When a phone number whiclz has an assigned carrier code is dialed, Toll Restriction check starts from the number that is dialed after the carrier code. will be displayed. 2. Dial (00 through 04) or press the NEXT button. Example: When dial (00) or press the NEXT button.
PRESS “SP-PHONE” PRESS “REOIAL” PRESS “CO” WHICH YOU WANT TO CHANGE-TO DIFFERENT CO NUMBER Descrip tiorz The last phone number dialed 011 an oulgoirlg call to CO line can be redialed up to 1.5 times. This feature is available for otlly KX-T7020, KX- T7030, KX- T7050 and KX- T7130. DIAL “0” DIAL CO NUMBER PRESS “MEMORY” Description Allows each CO butron slumber to be changed to a different CO number. Operation 1. Press the SP-PHONE buttorl. Operation 2.
PRESS “CO” WHICH YOU WANT TO CHANGE TO DSS BUTTON DIAL “1” DIAL EXTENSION NUMBER PRESS “CO” WHlCli YOU WANT TO CHANGE TO ONE TOUCH DIALING PRESS “MEMORY” DIAL “2” DIAL “9” DIAL PHONE NUMBER ~YOU may dial 81 through 86 instead of 9. Dialirzg (Inter Office Calling) PRESS “MEMORY” LIFT HANDSET OR PRESS “SP-PHONE” FRESS “CO” WHICH HAS BEEN CHANGED TO DSS BUnON Description Allows each CO button to be used as a one touch dialirlg memory locatiotl. Up to 16 digits cat1 be stored in each CO buttoll.
PRESS “MESSAGE” WHICH YOU WANT TO CHANGE TO OSS BUllON DIAL “1” DIAL EXTENSION NUMBER PRESS “MESSAGE” WHICH YOU WANT TO CHANGE TO ONE TOUCH DIALING PRESS “MEMORY” DIAL “2” DIAL “9” DIAL PHONE NUMBER @You may dial 81 through 86 instead of 9. PRESS “MEMORY” Description Allows the MESSAGE buttorz to clzange to a DSS (Direct Statiotz Sefectiotz) button. Description Allows the A4ESSAGE button to be used as a one touclz dialing nzemory location. Up to 16 digits catz be stored in tlze MESSAGE button.
PRESS “DSS” WHICH YOU WANT TO CHANGE TO DIFFERENT EXTENSION NUMBER DIAL “1” DIAL EXTENSION NUMBER PRESS “MEMORY” PRESS “OSS” WHICH YOU WANT TO CHANGE TO ONE TOUCH DIALING DIAL “9” DIAL PHONE NUMBER *You may dial 81 through 86 instead of 9. I I Description DIAL “2” , PRESS “MEMORY” Allows euch DSS button to change to an extension number which is different from the default extension number. Description Operation Setting l Be sure the handset is on the cradle and the SP-PHONE button is off. l .
PRESS “DSS” WHICH YOU WANT TO CHANGE TO OSS BUTTON DIAL “1” DIAL EXTENSION NUMBER DIAL “9” DIAL “2” PRESS “OS” WHICH YOU WANT TO CHANGE TO ONE TOUCH DIALING PRESS “MEMORY” DIAL PHONE NUMBER OYOU may dial 81 through 86 instead of 9. 1 MEMORY 1 PRESS “MEMORY” Description Allows each DSS bultorz to change to art edension riumber which is different from tile default estemioll climber. Description Operation Allows each DSS button to be usedas a one touch dialing memory locatioll.
: I: To barge in: LIFT HANDSET OR PRESS “SP-PHONE” PRESS “CO” WHOSE INDICATOR IS RED Description Conditions Allows an extension user to barge itt an etlgaged conversaliotz for the followitlg reasom: To establish Cotlferetrce mode or to receive calls that anolher extettsiotz has answered. 1. Dial he busy CO lirle I7mlber (81 rhrough 86) whose indicator is red insread of pressing the CO bur!otz. 2. Dial (6). 3. Hang up or press the SP-PHONE burton.
When the Door Opener is used with a Doorp!lone to unlock the Door Open&: While talking with the visitor throlrgh the doorphone; DIAL “5” HANG UP OR PRESS “SP-PHONE” The Door Opener 1 or 2 I+11 be unlocked corresponding to the Doorphone 1 or 2. When the Door Opener is -Itsed with an exte,lsion to unlock the Door Opener: Hang up after confirming the call then; LIFT HANDSET OR PRESS “SP-PHONE” DIAL “551” HANG UP OR PRESS “SP-PHONE” For Door Opener 2, dial “552” instead of “551 ‘I.
To lock - I LIFTHANDSET ORPRESS "SP-PHONE" DIAL'%" DIAL LOCKCODE (OOOthrough 999) DIAL LOCK CODEAGAIN DIAL"#" HANGUP ORPRESS "SP-PHONE" To unlock J I LIFTHANDSET ORPRESS "SP-PHONE" OlAL"6" DIAL LOCKCODE (OOOlhrough 999) DIAL "%" HANGUP ORPRESS "SP-PHONE" To conjirtn the lock code (extension ‘1 only) 0 Be sure the handset is in the cradle and the SP-PHONE button is off. eSet the MEMORY switch of the KX-T61630 to “PROGRAM”.
. Changed Features -. .,. . .
.Tlle listed fenlures and the features on the following pages 26 t/lrollglt 34 are revised. Please cotlfirnl and chatlge Ihen?. -., DSS Console Assigtlnlent Program address 02 03 3-25 Aurotzlaric Atrsweritlg (Autottlalicln~atlual) Selecriott Program address 16 .
(cont.) 4-13 4-14 6-4 ., Call on Hold Call on Exclusive Hold DTMF Receiver Check Recall rime 30s;lmin, lmiti & 3Os, 2mit2, Disable 3Os, 1min, Ztnin, 3miti, Itnin, 5min, Disable _ Recall time 3Os, lmin, lmin & 3Os, 2min, Disable 3Os, 1 min, .+n, 3min, linin, Smiti, Disable Program address , The disallowed combinations of SMDR Commlmicatiotz Parameters. mark space space tlotze even odd . .. I (Page 3-40) 38 3.
[02] &ECT] [MEMORY] [END] Conditions Description You can select the class service which is free from the speed dialing toll restriction. Programming set boundaries to CLASS2, thesystem will allow system speed dialing on service class 1 and class 2, but restrict on service class 3 according to the toll restriction checking. Refer to page 27. Ifyou 1. Dial (02). “CLASS 1” will be displayed and blink. 2. Keep pressing the SELECT desired class is displayed. 3. Press rke MEMORY button until the button.
The selective use of (his feature permits restricted dialing to specific stations. A class of service can be assigned to a particular slafion which prohibits or limits Ihal station’s dialing ability. The followings are Ihe available 3 classes of service. 1. Service class 1 will allow all calls. 2. Service class 2 will deny 10 codes programmed as a denied code (locarion 00-09) except 20 codes programmed as an exceptional code (location 00-19). 3.
i[i l] [AB] [SEI XT] [MEMORY] [END] 01 [l l] [NEWORY] v [END] .. . . .. . .. . until the desired extension number appears Description Conditions Toll restriction can help eliminate phone calls abuse and control cost. There are three classes of service available for each extension. When you start the programming from step 1, you may dial the desired extension number instead of NEXT button at step 2.
> [12] -.[NEXT] [C] [MEMORY] [END] :................ until the desired memory location number appears 01 Description 5. To advance to the next memory location number, press the NEXT button. To return to the previous memory location number, press the PREV button. To go to a desired memory location number, press the SELECT button and dial the mernory location number. For Service Class 2 or 3 (see “Toll Restriction”) up to 10 or 20 phone numbers can be selected for use in toll dialing.
1”“‘” . .._.......__......_._.... -[13] [A& &] [MEMORY] or [END] t[SELECT]J [13] [NEXT] [C] [MEMORY] [END] ;u .----.-.-.---.u,ltil the desired memory location number appears 6. Repeat steps 3 to Description Through programming, the desired extensions will be allowed to dial the phone numbers which are restricted by “Denied Code Assignment”. For service Class 2 or 3, up to 10 or 20 phone numbers can be selected. Memory locations 00-09 are not restricted by classes 2 and 3.
To start the printout :...... __..____.. [25] [MEdORY] START [END] To stop the printout ~.‘..“‘.“‘....‘.. [25] [SE&-] until ST0 P appears [MEMORY] [END] To stop the printout; 1. Dial (25). “START” will be displayed and blink. 1lescription The following printout is available. System parameters CO parameters Extension parameters DSS Console System Speed Dialing 2. Keep pressing the SELECT “STOP” is displayed. 3. Press the MEMORY Operation \ To start the printout; 1. Dial (25).
Description Five contents are printable. They are (1) System parameters (2) CO parameters (3) Extension parameters. (4) DSS Console and (5) System Speed Dialing. For further details, refer to the following Program address numbers and titles of the features. (1).
[26] [SE&CT] [MEMORY] [NEXT] [SELECT] Description \ It is possible to print either outgoing outside calls, or outgoing outside toll calls, and/or incoming outside, calls. 0 VTGOING: ON. . . to print all outgoing outside calls. 0 VTGOING: OFF... to stop printing OUTGOING: TOLL...to print only outgoing outside toll calls INCOMING: ON... to print incoming outside calls INCOMING: OFF...to stop printing l [MEMORY] [END] Program rn iag 1. Dial (26). “OUTGOING: ON” the “ON” will blink. 2.
.‘...“‘-...“-....-~-..-.-.. I [28] [SELECT] [MEMORY] [END] Description This will inform you that you keep holding the line by ringing, after the time passes. Programming 1. Dial (28). “TIME: 30 SEC” will be displayed “30 SEC” will blink. 2. Keep pressing the SELECT desired time is displayed. 3. Press the MEMORY brlttotl until the button. 4. To return to the initial programming press the END button. Example: 2 mimtes=[28] [SELECT] [SELECT] [MEMORY] [END] Programming See page 41.
Canceled Features The listed features are canceled from KX-T61610. . . # -. -.
PROGRAMWING 9 IQ] [SELECT] [G] H [*I i-..yeor :---mom/~ :--day TABLE [SELECT1 [G] M [+I /DJ [9] [SELECT] [MEMORY] ; i-hour :---minute :-.---.Ah4IPh4 --.---dnv ofrhe week number] [MEMORY] 191: nutomnric line nccess number [SS]: ourside line nccess I [Sl] through speed access code (00 rhrough 99) [END] _ 481 [C,D] [phone . . . . . ..__._._ :.----------Sysfenr Speed Dinling-Class &signmenr DSS Console SELECT] [MEMORY] [END] ;.-.
UEWORY] [END] **-.------CO number . .._.. urtfil the desired exterrsion exible Day ‘ngbtg rsignrnenl 391 [lOI roll ResrricrionXzss Assigrmenf illI mmber appears [END] ‘-..-.---.CO number ’.____. mri[ rhe desired exrensiorz number nljpeors I [C.;.H] [MEMORY] [END] k----.-...CO tzlrhlber i . . . . . wtril the desired exrension rtmtber nppenrs ‘NEWORY] 1 4EXT] NEDORY] .-.---mril Toll RestriczionDenied Codes Assigrmenf [121 INEXT] :.---.-.
