User's Manual

AirLive Traveler 3G II User’s Manual

6. How do I reset my Traveler 3G II to its factory default settings?

If other troubleshooting methods have failed, you may choose to Reset the Traveler 3G II

to its factory default settings.

To hard-reset the Traveler 3G II its factory default settings, follow the steps listed below:

1. Ensure the Traveler 3G II is powered on

2. Locate the Reset button on the back of the Traveler 3G II .

3. Use a paper clip to press the Reset button.

4. Hold for 8 seconds and then release.

5. After the Traveler 3G II reboots, it is reset to the factory default settings.

Note: Please note that this process will take a few minutes.

7. What is VPN?

• VPN stands for “Virtual Private Networking.” VPNs create a "tunnel" through an existing

Internet connection using PPTP (Point-to-Point Tunneling Protocol) or IPSec (IP Security)

protocols with various encryption schemes including Microsoft Challenge Handshake

Authentication Protocol (MS-CHAP) .

• This feature allows you to use your existing Internet connection to connect to a remote site

with added security. If your VPN connection is not functional, verify that your VPN dial-up

configuration is correct.

Note: This information should be provided to you from your VPN provider.

Pressing the Reset Button restores to its original factory default settings.

8. What can I do if my Ethernet cable does not work properly?

• First, ensure that there is a solid cable connection between the Ethernet port on the

Router, and your NIC (Network Interface Card).