User's Manual

AirLive Traveler 3G II User’s Manual

 Packet Filters

Packet Filter includes both outbound filter and inbound filter. And they have

same way to setting.

Packet Filter enables you to control what packets are allowed to pass the

router. Outbound filter applies on all outbound packets. However, inbound filter

applies on packets that destined to Virtual Servers or DMZ host only. You can

select one of the two filtering policies:

1. Allow all to pass except those match the specified rules

2. Deny all to pass except those match the specified rules

You can specify 8 rules for each direction: inbound or outbound. For each rule,

you can define the following:

 Source IP address

 Source port

 Destination IP address

 Destination port