Caution : You must read this before you proceed Table Label Picture Description QTY H Legs 2 I Table Top Frame 1 J Glass Top 1 Label Picture Description QTY ③ Bolt(M6*20mm) 9 ② Allen Key (4mm) 1 1
Before Beginning Assembly: Overview Glass Top(J) Leg(H) Leg(H) Table Top Frame(I) FRONT FACING This TABLE has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the TABLE parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 I H Open the carton and place all the parts on a clean, non-marring surface. Attach the Table Top Frame(I) to the Leg(I) using Bolt(③) and Allen Key(②) as shown in the picture.Loosely tighten the Bolts. Step 2 H ② I ③ H Attach the Table Top Frame(I) to the Leg(H) using Bolt(③) and Allen Key(②) as STEP 1.Loosely tighten the Bolts.
Stand up the table. Place the Table on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Exert pressure floorwards, onto the Table with both your hands. This will help to align all parts at all joints.Then get off the Table, and in a sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
