User Manual

1413
4. lamp effect and alarm indication
Alarm Notice
When the cleaner fails, the red light of the cleaner AUTO button flashes or is
always on, and it will emit a "tick" with different length. Please refer to the
following table to inquire the cause of the failure:
Red lights blinking:
lamp effect indication
Operation indication light
Sleep mode No light indication Non light indication
WIFI indication lamp remark
Standby mode Main push key blue lamp on
Link constant on/
disconnect flicker
Link constant on/
disconnect flicker
Link constant on/
disconnect flicker
Work mode Main push key blue lamp constant on
WIFI Standby mode
Recharging
mode
Low power recharging: the purple light of
the cleaner key is always on.
Non-low power recharging: the purple light
of the cleaner is always on
Link constant on/
disconnect flicker
Recharging
mode
Purple breathe
Link constant on/
disconnect flicker
Error mode Main key button red light constant on or flicker
WIFI Lamp quick
flicker
Distribution
network link
WIFI Lamp constant
on
Distribution
network link
successful
6. Troubleshooting
In the process of using the product, if the following problems appear, you could
contrast and compare for the independent solution.
Warm Tips:
If the above method cannot solve the problem, please try the following operation:
1. Re-open the power switch on the bottom of the cleaner and restart the cleaner.
2. If the problem cannot be solved by restarting the cleaner, please send the
cleaner to the after-sales service center for repair.
No
01
1
02
2
03
3
04
4
Beeps Error Solution
Gyroscope error
Bumper error
Drop sensor error
Keep the robot at a stable place to
restart and do not move the machine
Check the bumper and remove any
object that could be blocking it
Check if the bumper dirty and clean sensor
Low power or charging error
Robot voltage is too low and needs
manually charging
Beeps and red light always on:
01
02
03
04
1
2
3
4
Beeps Error Solution
Driving wheel error
Side brushes error
Fan error
Roller brush error
Check if the drive wheel is blocked
Check if the side brush is blocked and
clean the side brush
Clean up the garbage and air ducts
channel
Check if the roller brush is entangled
and clean the roller brush