Manualshelf

User Manual

ManualsBrandsOmron ManualsElectronicsRFID System
31323334353637383940
76
Section 4 Installing Tags
RFID System
User's Manual
Section 4
Installation
V680-D1KP58HT
Tag Installation Direction
The Tags have a limited life span. Therefore, install them in locations in which they can be easily
replaced. Use the following procedure to mount the V680-A80 Attachment when required.
1. Mount the Attachment to the workpiece.
Use a tightening torque of 21 to 42 N·m.
2. Tighten the lock nut.
3. Mount the Tag to the Attachment.
The Tag can be mounted in either direction.
Insert the split pin into the 3.2-dia. hole and open the tip of the pin to secure.
Two nuts and one split pin are provided with the V680-A80 Attachment. Replacement split pins must be
provided by the user.
Split pin Nominal: 3.2 mm × 20 mm (length)