Programming Manual

28 Clinician Programming Manual

Understanding the Programming Screen

Use the Programming screen to congure electrodes and set stimulation parameters for a subprogram. A subprogram

requires at least one anode and one cathode. You can congure the implantable stimulator enclosure or trial stimulator

ground pad as an electrode by tapping the can icon on the Programming screen. You can use a commercially available

ground pad for the trial stimulator.

Note: During a trial, do not send the patient home with a program that uses the can as an anode or cathode when the

patient does not have a ground pad.

You can manually adjust the allocation for each congured electrode if there are at least two congured electrodes of the

same polarity. e Clinician Programmer does not change a locked electrode when balancing the amplitude allocation. e

Clinician Programmer ensures that the sum of the amplitude allocation is always 100% of the set amplitude.

0300-000176-001 Rev.2 SCS CP_Mobile.indb 28 7/12/19 9:20 AM