Datasheet

ManualsBrandsNKK ManualsIlluminated Pushbutton SwitchesIlluminated Pushbutton Switch Green 1CO ON-(ON) LED

Series LP01

Short Body Pushbuttons

www.nkk.com

D66

Indicators

AccessoriesSupplement

Tactiles

KeylocksRotaries

Pushbuttons

Illuminated PB

Slides

Programmable

Rockers

Touch Tilt

Toggles

General Speciﬁcations

Electrical Capacity (Resistive Load)

Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC

Other Ratings

Contact Resistance: 50 milliohms maximum

Insulation Resistance: 200 megohms minimum @ 500V DC

Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum

1,500V AC minimum between contacts and case for 1 minute minimum

Mechanical Life: 500,000 operations minimum

Electrical Life: 50,000 operations minimum for 3A @ 125V/250V AC & 3A @ 30V DC

100,000 operations minimum for 1A @ 125V/250V AC & 1A @ 30V DC

Nominal Operating Force: 1.5N for Single Pole; 3.0N for Double Pole

Contact Timing: Nonshorting (break-before-make)

Travel: Total Travel .118” (3.0mm)

Materials & Finishes

Actuator: Polycarbonate

Housing: Bushing mount: Glass ﬁber reinforced polyamide (UL94V-0);

Snap in mount: Polybutylene terephthalate (PBT) (UL94V-0)

Base: Glass ﬁber reinforced polyamide (UL94V-0)

Movable Contact: Phosphor bronze & silver with silver plating

Stationary Contacts: Common terminal: Phosphor bronze with silver plating;

Contact terminals: Phosphor bronze with tin & copper plating

Lamp Terminals: Phospher bronze with tin and copper plating

Environmental Data

Operating Temperature Range: –10°C through +50°C (+14°F through +122°F) for Illuminated

–25°C through +70°C (+13°F through +158°F) for Nonilluminated

Humidity: 90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning

in 1 minute; 3 right angled directions for 2 hours

Shock: 50G (490m/s

) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

Installation

Mounting Torque:

0.8Nm (7.08 lb•in)

Soldering Time & Temperature: Manual Soldering: See Proﬁle A in Supplement section.

Cleaning: Hand clean locally with alcohol based solution

Standards & Certiﬁcations

Flammability Standards: UL94V-0

housing & base

UL: File No. E44145 - Recognized only when ordered with marking on switch.

Add “/U” or “/CUL”

to end of part number

to order UL recognized switch.

All single & double pole models recognized at 3A @ 125V/250V AC or 3A @ 30V DC.

Summary of content (6 pages)

PAGE 1
Toggles Series LP01 Short Body Pushbuttons Rockers General Specifications Electrical Capacity (Resistive Load) Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Power Level (silver): Other Ratings D Contact Resistance: 50 milliohms maximum Insulation Resistance: 200 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts and case for 1 minute minimum Mechanical Life: 500,000 operations minimum El
PAGE 2
Toggles Series LP01 Rockers Distinctive Characteristics Pushbuttons Environmentally friendly components and packaging materials meet RoHS Directive restricting use of hazardous materials. Suited for lead-free soldering because of heat resistant resin materials. Smooth, slightly concave surface of cap designed to fit fingertip. Unique design and construction of cap prevents its removal and limits tampering.
PAGE 3
Series LP01 Toggles Short Body Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE 1 5 Poles C C 1 SPDT C Bushing 2 DPDT M Snap-in Housing (ON) K LEDs Black ( ) = Momentary 5C Red 5D Amber 5F Green IMPORTANT: Rotaries Cap Color B Nonilluminated White Nonilluminated Cap Colors No Nonilluminated Code Switches are supplied without UL & cULus markings unless specified. UL & cULus recognized only when ordered with marking on switch.
PAGE 4
Series LP01 Toggles Short Body Pushbuttons MOUNTING TYPES M Snap-in .630” (16.0mm) Diameter Rockers Bushing .669” (17.0mm) Diameter Recommended Panel Thickness: 0.2 (18.1) +– 0.0 .713 (1.7) +– 0.0 0.1 .067 0.2 (16.0) +– 0.0 Dia .630 Pushbuttons This mounting option is supplied with a steel hexagon nut with nickel plating. Recommended Panel Thickness: 0.1 (7.5) –+ 0.0 .295 .079” ~ .256” (2.0mm ~ 6.5mm) .039” ~ .126” (1.0mm ~ 3.2mm) (17.3) .681 (21.0) Min .827 (25.0) Min .984 Allow .
PAGE 5
Series LP01 Toggles Short Body Pushbuttons CAP COLORS Illuminated Cap Rockers B Pushbuttons White The translucent cap is an integral part of the switch and is not available separately. Material: Polycarbonate A C Black Red F Green The cap is an integral part of the switch and is not available separately. Material: Polycarbonate Finish: Matte Finish: Matte TYPICAL SWITCH DIMENSIONS Bushing Mount • Single Pole (3.7) .146 (1.2) x (2.0) Typ .047 x .079 M16 P1 (0.5) Typ .020 (9.7) .382 (2.
PAGE 6
Toggles Series LP01 Short Body Pushbuttons OPTIONAL ACCESSORIES NO – + (17.0) .669 (17.1) .673 (17.0) .669 AT719 Double Pole Straight PC Terminals NC NO L NO – + COM (3.0) .118 (17.0) .669 (3.7) .146 D (5.0) .197 (4.85) Typ .191 (17.1) .673 NO COM (5.55) Typ .219 (5.0) .197 AT718 Single Pole Straight PC Terminals L (3.0) Typ .118 (3.7) .146 (5.55) .219 NC NO – + COM (3.0) .118 (4.85) Typ .191 Pushbuttons L (3.7) .146 (5.55) .219 (4.85) Typ .191 NC NO L (17.1) .