Setting Guide(Movie Edition)

42
Time-Lapse Movie Techniques, Continued
Workflow Buttons and Icons Settings Tips and Tricks Viewing Movies Appendix
2
Adjust time‑lapse movie settings.
Adjust the following settings:
• Interval: The interval (in minutes and
seconds) should be longer than the
slowest anticipated shutter speed.
Highlight Interval and press
2
. Choose an interval and press
J
.
• Shooting time: The total shooting time
(in hours and minutes) can be up to 7
hours and 59 minutes.
Highlight Shooting time and
press
2
.
Choose a shooting time and
press
J
.
• Exposure smoothing: Select On to smooth
abrupt changes in exposure in modes
other than M (note that exposure
smoothing only takes eect in mode
M if auto ISO sensitivity control is on).
Large changes in subject brightness
during shooting may result in appar-
ent variations in exposure, in which
case it may be necessary to shorten the
interval between shots.
Highlight Exposure smoothing
and press
2
.
Highlight an option and press
J
.
• Silent photography: Select On to reduce
wear on the shutter mechanism and si-
lence the shutter during shooting; the
only time the sound of the shutter or
mirror will be heard is when the mirror
is raised or lowered at the start and end
of shooting. Some camera features will
be disabled, including ISO sensitivities
of Hi 0.3 through Hi 2.0 (
0
13), ash
photography, exposure delay mode,
long exposure noise reduction, and
icker reduction (
0
25).
Highlight Silent photography
and press
2
.
Highlight an option and press
J
.