Technical Guide(N-Log Recording Edition)
7
2
Enable N‑Log recording.
Return to HDMI > Ad‑
vanced in the setup menu
and select N‑Log for N‑Log/
HDR output options. Note
that N‑Log footage is re‑
corded only to the external
device, not to the camera
memory card.
3
Congure the recorder for HDMI input.
For details, see the documentation supplied with the
device.
4
Start lming.
If On is selected for HDMI> Advanced> External re‑
cording control in the camera setup menu, you can
start and stop recording using the camera movie‑re‑
cord button (page page 1010). Contrast can be enhanced for
display on the camera during recording (view assist;
page page 1111).
When the camera standby timer expires, the monitor
will turn o and HDMI output will end. Choose No
limit or a time longer than the anticipated recording
time for Custom Setting c2 (Standby timer).