Datasheet

40
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
COMPONENT DIMENSIONS (mm):
Type Case Size A B C D (ref.) E ±0.1 F ±0.05
NIN-HK 0402 1.19 max. 0.64 max. 0.66 max. 0.25 0.23 0.15
NIN-HJ 0603 1.80 max. 1.20 max. 1.02 max. 0.38 0.35 0.25
NIN-HD 0805 2.40 max. 1.60 max. 1.40 max. 0.51 0.44 0.15
NIN-HC 1008 2.90 max. 2.50 max. 2.03 max. 1.20 0.55 0.15
L
G
H
Type L G H
NIN-HK 1.18 0.36 0.66
NIN-HJ 1.92 0.64 1.02
NIN-HD 2.80 0.76 1.78
NIN-HC 3.31 1.27 2.54
RECOMMEND LAND PATTERN
DIMENSIONS (mm)
E
E
A
B
C
D
F
Wirewound Chip Inductors
NIN-H Series
• SIZES K(0402), J (0603), D (0805) AND C (1008)
• HIGH Q, HIGH CURRENT AND HIGH SRF CHARACTERISTICS
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE*
• HIGH INDUCTANCE AVAILABLE IN SMALL SIZE
• EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE
*FLOW & REFLOW SOLDERING 0805 & 1008 SIZES, 0402 & 0603 REFLOW SOLDERING ONLY
FEATURES
ENVIRONMENTAL CHARACTERISTICS
NIN-H J 6N8 J TR F
Pb-free/RoHS compliant
Taped & Reeled
Tolerance Code
(S ±0.3nH, G ±2%, J ±5%, K ±10%, M ±20%)
Inductance Value in Nanohenries
(see standard values table for correct
value code)
Case Code (K=0402, J = 0603, D = 0805, C = 1008)
Series
PART NUMBER SYSTEM
Specifi cations
Case Size Code
0402 (K) 0603 (J) 0805 (D) 1008 (C)
Inductance Range 1.0nH ~ 68nH 1.8nH ~ 270nH 2.2nH ~ 910nH 10nH ~ 4.7µH
Inductance Tolerance ±0.3nH (S), ±5% (J) ±2% (G), ±5% (J), ±10% (K), ±20% (M)
Operating Temperature Range -40°C ~ +125°C
Test Specifi cations Test Method & Condition
Solderability 75% Min. Coverage After 3 sec. dip in +230°C soldering pot (post fl ux)
Resistance to Soldering Heat
(1) No evidence of damage
(2) Inductance change ±5% of initial value
(3) Q factor within ±10% of initial value
(±20% for 0402 & 0603 case sizes)
After 5 seconds at +260°C (with pre-conditioning)
Humidity
(1) No evidence of damage
(2) Inductance change ±5% of initial value
(±10% for 0402 case size)
(3) Q factor within ±10% of initial value
(±20% for 0402 & 0603 case sizes)
After 500 hours at 60°C and 90 ~ 95% RH
(0402 case size - after 96 hours 50°C and 90 ~ 95% RH)
Low Frequency Vibration After 2 hrs per axis, 10 ~ 55Hz, 1.5mm amplitude
Thermal Shock
After 100 cycles (10 cycles 0402) at -40°C and +125°C
(30 minutes at each temperature)
Low Temperature Storage After 500 hrs at -40°C
High Temperature Load Life
(1) No evidence of damage
(2) Inductance change ±10% of initial value
(±20% for 0402 case size)
(3) Q factor within ±10% of initial value
(±20% for 0402 & 0603 case sizes)
After 500 hrs at +125°C with rated DC current
(0402 case size - after 1,000 hrs at +85°C)
Humidity Load Life No evidence of short or open circuit
After 500 hrs at 60°C with 90 ~ 95% RH with rated DC current
(0402 case size- 1,000 hrs at +40°C)
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details