Assembly Instructions

Safety Instructions
These units should be placed on a level surface. Failure to do so can result in poor product performance or create a possible
safety hazard. This unit should be securely anchored to a wall or floor with suitable fasteners, which are not included. Do not
use this unit for anything other than the manufacturers intended purpose. DO NOT STAND ON ANY PART OF THE UNIT, OR
USE IT AS A LADDER. Evenly distribute the weight on each level and always keep the heavier loads on the bottom. Use care
when working with metal parts.
MODEL NUMBER
UR482486BLK
D - Wood Shelf
C - Post
General Instructions
Assembly is done with the rivets of the beams and braces fitting into the slots of the post. A rubber mallet may be used on the
beams and braces to seat the rivets properly. A hammer can also be used, providing one uses a cloth or a block of wood
between the hammer head and the parts to prevent damage. Tap gently and be sure the rivets are straight and fully engaged.
B - Braces
Steel Storage Rack
5 Shelf - 48”H x 24”D X 86”H
Description Qty Part Number
A beams 10 URBM48-BLK
B braces 10 URBR24-BLK
C posts 8 URPS43-BLK
D shelves 5 RPB32448
Should you have any comments, damage, missing parts, or problems with assembly of this unit contact us:
Si tiene algún comentario, daño, piezas faltantes o problemas con el ensamblaje de esta unidad, contáctenos:
Chat: www.edsal.com/chat or www.edsal.com/contact
Email: [e-mail]
Phone: [phone]
To obtain replacement parts please provide: Model Number, Part Number & Description, Location Purchased, and Date Purchased
Para obtener piezas de repuesto, proporcione: número de modelo, número de pieza y descripción, lugar y fecha de compra.
Edsal Manufacturing Co. LLC
1555 W. 44th Street
Chicago, IL 60609
US Patents & Patents Pending
Patentes y patentes pendientes de EE. UU.
Rev: C041020
A - Beams