Specifications

MVC-88GH/GHW— PARTS & OPERATION MANUAL — REV. #4 (10/15/04) — PAGE 9
MVC-88H PLATE COMPACTOR — RULES FOR SAFE OPERATION
Maintenance Safety:
NEVER lubricate components or attempt service on a
running machine.
ALWAYS allow the machine a proper amount of time to
cool before servicing.
Keep the machinery in proper running condition.
Fix damage to the machine immediately and always
replace broken parts.
Dispose of hazardous waste properly. Examples of
potentially hazardous waste are used motor oil, fuel and
fuel filters.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
Emergencies:
ALWAYS know the location of the
nearest
fire extinguisher
.
ALWAYS know the location of the
nearest
first aid kit
.
In emergencies
always
know the location
of the nearest phone or
keep a phone on the job site
.
Also know the phone numbers of the nearest
ambulance
,
doctor
and
fire department
. This
information will be invaluable in the case of an
emergency.
Loading and Unloading (Crane):
Before lifting, make sure that machine parts (hook and
vibration insulator) are not damaged and screws are not
loosened or lost.
ALWAYS make sure crane or lifting device has been
properly secured to the hook of guard frame on compactor.
NEVER lift the machine while the engine is running.
Use adequate lifting cable (wire or rope) of sufficient
strength.
Use one point suspension hook and lift straight upwards.
NEVER allow any person or animal to stand underneath
the machine while lifting.
Try not to lift machine to unnecessary heights.
Transporting
ALWAYS shutdown engine before transporting.
Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
Drain fuel when transporting compactor over long
distances or bad roads.
ALWAYS tie down the compactor during transportation
by securing the compactor's guard frame with rope.