OPERATION AND PARTS MANUAL © COPYRIGHT 2002, MULTIQUIP INC. JA-SERIES WALK-BEHIND TROWEL MODEL # SERIAL # Revision #6 (11/14/05) MULTIQUIP INC.. PARTS DEPARTMENT: 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 FAX: 800-672-7877 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE: 310-537-3700 800-421-1244 800-478-1244 FAX: 310-537-3927 FAX: 310-631-5032 E-mail:mq@multiquip.com • www:multiquip.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL— TABLE OF CONTENTS Here's How To Get Help ............................................ 3 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Training Checklist ...................................................... 6 Daily Pre-Operation Checklist ................................... 7 Safety Message Alert Symbols .............................. 8-9 Rules For Safe Operation ...............................
JA-SERIES TROWEL— PARTS ORDERING PROCEDURES ■ ■ ■ ■ ■ ■ ■ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: • • • • UPS Ground UPS Second Day or Third Day* UPS Next Day* Federal Express Priority One (please provide us with your Federal Express account number)* • • Airborne Express* Truck or parcel post *Normally shipped the
JA-SERIES TROWEL— TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s. TRAINING CHECKLIST NO. DESCRIPTION 1 Read Operator’s Manual completely. 2 Machine layout, location of components, checking of engine and gearbox fluid level.
JA-SERIES TROWEL— DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST DAILY PRE-OPERATION CHECKLIST 1 Engine Oil Level. 2 Gearbox Fluid Level. 3 Condition of Blades. 4 Blade Pitch Operation. 5 Safety Kill Switch Operation. 6 Clutch Operation COMMENTS: JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the MQ Whiteman JA-SERIES TROWEL.
JA-SERIES TROWEL— SAFETY MESSAGE ALERT SYMBOLS Accidental Starting ALWAYS place the engine ON/OFF switch in the OFF position, when the trowel is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable. NOTE This walk-behind trowel, other property, or the surrounding environment could be damaged if you do not follow instructions.
JA-SERIES TROWEL— RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the JA-Series walk-behind trowel. SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
JA-SERIES TROWEL— RULES FOR SAFE OPERATION ■ DO NOT operate this trowel unless all guards and safety devices are attached and in place. See Pages 16 and 17. ■ ALWAYS use proper lifting techniques when moving the trowel. ■ ALWAYS check to make sure that the operating area is clear before starting the engine. ■ ALWAYS test the safety kill switch devices before operating the trowel. ■ NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
JA-SERIES TROWEL— OPERATION AND SAFETY DECALS Machine Safety Decals The JA-Series walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. CAUTION WARNING! DO NOT LIFT MACHINERY BY GUARD RING.
JA-SERIES TROWEL— SPECIFICATIONS (TROWEL) Side View Figure 2. JA-Series Trowel Dimensions Table 1. JA-Series Trowel Specifications A– Height (Lifting Hook) 36.7 in (931.6 mm) B– Height Engagement Lever) 41.4 in (1,044.2 mm) 36.5 (927.1 mm) C–Width 70.5 (1,789.4 mm) D–Length Weight – Operating see Table 3. Sound Pressure 94 db Vibration 2.0g (19.6 m/s2) Ring Diameter 36.5 in (92.7 cm) Number of Blades 3 or 4 Blade Tip Speed – FPM (m/s) 1,182 fpm (6.0 m/s) Rotor – RPM (max.) 129 r pm @ 4000 NOTE: 1.
JA-SERIES TROWEL— SPECIFICATIONS (ENGINES) Table 2. Specifications (Engines) Engine Model HONDA GX160K1QA2 ROBIN EH17-2 BRIGGS & STRATTON INTEK I/C 1114000 Type Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft Gasoline Engine Bore X Stroke 2.7 in. X 1.8 in. (68 mm x 45 mm) 2.64 in. x 1.93 in. (67 mm x 49 mm) 2.69 in. x 2.04 in. (68.
JA-SERIES TROWEL— GENERAL INFORMATION JA-Series Walk-Behind Trowel Familiarization Blades This walk-behind trowel is designed for the floating and finishing of concrete slabs. The blades of the trowel finish the concrete as they are rotated around the surface. Blades are classified as combination (8 inches wide), float (10 or 8 inches wide), and finish (6 inches wide).
JA-SERIES TROWEL— CONTROLS AND COMPONENTS 4 5 3 6 2 1 QUICK PITCH ™ HANDLE 7 8 O R MB O CO T A IC D B IN H IS IM IN R F T O D MB A CO O L E R J 13 P F H IS IN 4 5 11 3 6 2 12 15 7 8 Figure 3. JA-Series Walk-Behind Trowels STANDARD HANDLE 13 14 9 10 16 17 PAGE 16 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL— CONTROLS AND COMPONENTS Figures 3 shows the location of the Basic controls or components, for the JA-Series trowel. Listed below is a brief explanation of each control or component 1. Quick Pitch™ Control Handle – To adjust the pitch of the blades, grasp the handle then squeeze and either move the handle forward or backward to achieve the desired blade pitch. 2.
JA-SERIES TROWEL— JASIC ENGINE HONDA engine shown. Figure 4. Engine Controls and Components INITIAL SERVICING The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. 1. 5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6.
JA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Assembly and Installation Before the trowel can be put into operation there are some components that must be installed before the trowel can be used. This section provided general instructions on how to install those components. Instruction sheet P/N 20485 provides further details for the handle assembly. Handle Tube Installation (All Models) 1. Install the handle tube to the gearbox as shown in (Figure 5).
JA-SERIES TROWEL — ASSEMBLY AND INSTALLATION Figure 9. Throttle Cable Connection (ROBIN) 4. Tighten cable clamp screw and swivel stop screw. 5. After the cable has been installed on the engine, adjust and tighten operator position of the handle to lock the throttle cable at the proper length. 6. Adjust cable tension by rotating the barrel adjuster. (Figure 10) Figure 11. Engine Kill Wire Connection Pitch Cable Installation 1.
JA-SERIES TROWEL — ASSEMBLY AND INSTALLATION 2. 3. 4. Lock the spring in the compressed position, by releasing the blade pitch adjustment trigger, (Quick-Pitch™ model). Remove one brass set nut from the blade pitch cable end as shown in (Figure 14). Thread the second brass set nut towards the cable as far as possible. Pre-load Adjustment (Quick-Pitch™ Models Only) 1. After the Quick-Pitch™ handle has been installed on the trowel, spring pre-load adjustment will be required. 2.
JA-SERIES TROWEL— PRE-INSPECTION CAUTION NEVER operate the trowel in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the trowel. NEVER place hands or feet inside the guard rings while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. Figure 17. Engine Oil Dipstick (Removal) 3.
JA-SERIES TROWEL— PRE-INSPECTION Blade Check Explosive Fuel Check for worn or damaged blades. Check to see if one blade is worn out while the others look new. If this is the case there could be a blade pitch problem. Refer to the maintenance section of this manual for blade pitch adjustment procedure. Replace any worn blades. Fuel Check Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running.
JA-SERIES TROWEL — INITIAL START-UP (GASOLINE ENGINE) CAUTION The trowel is heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT lift the trowel by the guard rings. Lifting the Trowel Onto a Slab. Auxiliary Lifting Tube Remove the auxiliary lifting tube located on top of the main handle. Insert the tube into the socket located on the opposite side of the gearbox (Figure 21) from the handle. Make sure that the hole in the tube engages with the pin in the socket.
JA-SERIES TROWEL — INITIAL START-UP (GASOLINE ENGINE) 3. Place the centrifugal kill switch (Figure 24) in the "ON" position. For models that use this feature. CAUTION NEVER disable or disconnect the centrifugal kill switch. It is provided for the operators’ safety and injury may result if it is disabled, disconnected or improperly maintained. Figure 26. Starter Grip 6. If the engine has started, slowly return the choke lever (Figure 25) to the CLOSED position.
JA-SERIES TROWEL — OPERATION The following steps are intended as a basic guide to machine operation, and are not to be considered a complete guide to concrete finishing. We suggest that all operators (experienced and novice) read “Slabs on Grade” published by the American Concrete Institute, Detroit, Michigan. Read the “Training” section of this manual for more information. Pitching The Blades Quick Pitch Handle 1.
JA-SERIES TROWEL — OPERATION (Figure 31) below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel. The trick is to let the trowel do the work. Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area. Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided. The best way to get accustomed to the trowel is repeated use.
JA-SERIES TROWEL — OPTIONS Blades Clip-On Float Blades (Optional) NOTE Blades should be changed when they fail to Specification and part number finishare concrete in atosatisfactory manner. subject change without notice. Blades are a vital part of finishing concrete. This trowel, or finisher, has been designed to finish concrete and the blades are built to stringent quality standards out of the finest trowel steel.
JA-SERIES TROWEL — OPTIONS Grinding Attachments Trowel Arm Adjustment Tool Available grinding attachments are used for grinding surface imperfections or joints. These attachments allow greater utilization of your trowel. Figure 36 illustrates a typical grinding disk assembly, complete with hub and stone mounting plate. If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted.
JA-SERIES TROWEL — MAINTENANCE NOTE See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. At the front of the book (Page 7) there is a “Daily Pre-Operation Checklist ”. Make copies of this checklist and use it on a daily basis. Trowel Arm Adjustment Procedure NOTE The following procedure should be followed to adjust trowel arms when it becomes apparent that the trowel is finishing poorly or in need of routine maintenance.
JA-SERIES TROWEL — MAINTENANCE 2. Start engine, and bring trowel blades up to full speed and look for the following conditions: ■ Does the trowel have a perceived rolling or bouncing motion when in use? ■ Look at the trowel while it is running, does the guard ring “rock up and down” relative to the ground? b. Loosen the jam nut and cone point square head set screw, and carefully lift the upper trowel assembly off of the spider assembly.
JA-SERIES TROWEL — MAINTENANCE Trowel Blade Removal 1. Remove the trowel blades from the trowel arm by removing the two hex head bolts (Figure 44) from the trowel arm. Set blades aside. HEX HEAD BOLT REMOVE LOCK WASHER BLADE ARM 3. If the trowel arm is found to be uneven or bent, replace the trowel arm. A bent trowel will not allow the trowel to operate in a smooth fluid rotation. 4. Next, check each of the six sides of the round machined shaft section of the trowel arm.
JA-SERIES TROWEL — MAINTENANCE 3. Un-screw the locking bolts on the adjustment tool, and place the trowel arm into the adjustment fixture channel as shown in (Figure 46). A thin shim may be required to cover the blade holes on the trowel arm. Make sure to align the trowel adjustment bolt with the fixture adjustment bolt. 4. Using an allen wrench, tighten the locking bolts on the adjustment tool and securely lock the trowel arm in place. 5.
JA-SERIES TROWEL — MAINTENANCE 10. Carefully lift the upper trowel assembly, line up the keyway on gear box main shaft and insert into spider assembly 11. Reinstall square head cone point into spider plate and tighten in place. Tighten jam nut. Use care in making sure point of set screw engages groove in gear box main shaft. 12. Lubricate all grease points (zerk fittings) with premium "Lithum 12" based grease, conforming to NLG1 Grade #2 consistency. Testing 1.
JA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 5. TROUBLESHOOTING SYMPTOM Engine running rough or not at all. Safety kill switch not functioning. If trowel “bounces, rolls concrete, or makes uneven swirls in concrete”. Machine has a perceptible rolling motion while running. POSSIBLE PROBLEM SOLUTION Kill switch malfunction? Make sure that the kill switch is ON or replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine.
JA-SERIES TROWEL — TROUBLESHOOTING (TROWEL) TABLE 6. TROUBLESHOOTING (CONTINUED) SYMPTOM Clutch slipping or sluggish response to engine speed change. POSSIBLE PROBLEM SOLUTION Worn V-belts? Replace V-belt. Dir ty centrifugal clutch? Disassemble and clean clutch. Defective or worn out centrifugal clutch? Replace entire clutch. Hand clutch out of adjustment? Adjust per instructions in maintenance section of this manual. Worn or defective hand clutch par ts? Replace par ts as necessary.
JA-SERIES TROWEL — TROUBLESHOOTING (ENGINE) TABLE 7. TROUBLESHOOTING (ENGINE) SYMPTOM Difficult to star t, "fuel is available, but no SPARK at spark plug". POSSIBLE CAUSE Spark plug bridging? Check gap, insulation or replace spark plug. Carbon deposit on spark plug? Clean or replace spark plug. Shor t circuit due to deficient spark plug insulation? Check spark plug insulation, replace if worn. Improper spark plug gap? Set to proper gap.
JA-SERIES TROWEL — EXPLANATION OF CODES IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
JA-SERIES TROWEL — SUGGESTED SPARE PARTS JA-SERIES TROWEL 1 TO 3 UNITS WITH HONDA GX-160K1QA2 ENGINE. 1 to 3 Units Qty. ........ P/N .............................. Description 2 ............ 20856 .................... SAFETY SWITCH 1 ............ 20285 .................... CABLE STANDARD HANDLE 1 ............ 20297 .................... CABLE QUICK PITCH™ 1 ............ 20435 .................... LEVER W/CABLE 4 ............ 1157 A .................. BUSHING 1 ............ 2828 ......................
JA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATES AND DECALS 3 2 4 1 QUICK PITCH ™ HANDLE 5 O 9 R MB O CO T A IC D B IN H 8 IS IM IN R F T O D MB A CO O L E R J 6 P F H IS IN 7 12 10 STANDARD HANDLE 11 13 14 15 16 19 17 18 PAGE 40 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO. 1 2 3 4 5 6 7 8 * 9 PART NO. 1758 12405 20527 20526 2942 1736 1735 11246 10 11 12 * 13 14 * 15 * 16 17 18 19 1940 11092 11246 1492 11247 11246 1261 1848 2938 11246 12620 * PART NAME QTY. REMARKS DECAL: QUICK PITCH™ HANDLE 1 DECAL: QUICK PITCH™ HANDLE INSERT 2 1 DECAL: QUICK PITCH™ WARNING DECAL: QUICK PITCH™ LATCH WARNING 1 DECAL: MQ WHITEMAN 13" 1 DECAL: ARROWS 1 DECAL: PRE-LOAD INDICATOR 1 DECAL: OIL CHECK 1 NAMEPLATE ..................
JA-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. 40 3 21 5 7 4 8 6 9 10 22 18 DETAIL “A” 17 43 16 11 14 42 15 19 2 20 44 SEE DETAIL “B” 21 22 SEE DETAIL “A” 1 12 3 13 24 23 39 27 30 31 25 26 41 ASM 32 38 12 3 37 33 2 36 28 1 35 29 DETAIL “B” 34 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY. 3 CABLE IS ATTACHED TO THROTTLE AND SEALED AT THE FACTORY. ORDERABLE AS A UNIT ONLY.
JA-SERIES TROWEL — STANDARD HANDLE ASSY. STANDARD HANDLE ASSY. NO. 1 2 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 11 12 13 14 15 16 17 18 19 20 21$ 22$ 23 24 25# 26# 27# 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 PART NO. 20463 20774 20818 20817 0281 20282 0122C 3615 1478 20478 12556 20435 20439 1492 20438 0786 0786A 20287 20285 20856 1602 20988 20514 1662 20275 1118 20279 21017 1493 12567 2942 20434 20845 1116 10133 20392 20471 1261 20280 20819 20301■ 20421■ A8638■ PART NAME QTY.
JA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH ™ T-HANDLE ASSY. 2 3 25 55 4 1 20 19 5 18 26 21 14 DETAIL “A” 22 58 3 6 10 24 25 17 SEE DETAIL “A” 7 8 26 16 9 10 60 23 59 27 15 11 SEE DETAIL “B” 28 11 54 46 12 48 13 30 45 49 29 57 50 31 3 6 51 47 2 32 43 44 33 1 34 52 42 38 DETAIL “B” 40 41 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
JA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. NO. 1 2 3 4 5 6 7 8 * 9 * 10 * 11 * 12 * 13 * 14 15 16 17 18 19+ 20+ 21+ 22+ 23+ 24 25$ 26$ 27 28 29 30 31 32 33 34 35# 36# 37# 38 39 40 PART NO. 20463 20774 20478 12556 20526 20435 20527 20389 1746 12405 1729 1706 20437 4568 1711 1719 20439 20438 1731 20443 1709 20269 20276 20856 1602 20988 20514 20297 2942 1715 20270 1735 21017 1662 20275 1118 20279 1493 1737 1733 PART NAME QTY.
JA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. 2 3 25 55 4 1 20 19 5 18 26 21 14 DETAIL “A” 22 58 3 6 10 24 25 17 SEE DETAIL “A” 7 8 26 16 9 10 60 23 59 27 15 11 SEE DETAIL “B” 28 11 54 46 12 48 13 30 45 49 29 57 50 31 3 6 51 47 2 32 43 44 33 1 34 52 42 38 DETAIL “B” 40 41 39 37 36 35 56 53 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 PART OF ENGINE ASSEMBLY.
JA-SERIES TROWEL — QUICK PITCH™ HANDLE ASSY. QUICK PITCH HANDLE ASSY. NO. 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58■ 59■ 60■ PART NO. 1736 1718 1732 1717 12642 1758 20845 20434 1261 20471 20392 10133 1116 20390 20293 20280 20421 A8638 20271 PART NAME QTY.
JA-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSEMBLY. PAGE 48 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — THRUST BEARING KIT ASSY. THRUST BEARING KIT ASSEMBLY. NO. 1 * 2 * 3 * 4 * 5 * 6 PART NO. 12208 12778 10793 1471 1154A 10968 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR W/BUSHING 1 BUSHING 1 LOWER WEAR PLATE 1 THRUST BEARING KIT .................................................... 1 ........... INCLUDES ITEMS W/ * JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — 4-BLADE SPIDER ASSY. 3 AND 4 BLADE SPIDER ASSY. PAGE 50 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — 4-BLADE SPIDER ASSY. 4 BLADE SPIDER ASSY. NO. 1 * 2 * 3 * 4 * 5$ 6$ 7$ 8$ 9$ 10$ 12$ 13$ 14$ 15$ 16$ 17$ 18$ 19$ 20$ 21 22 23 24 # * PART NO. 12208 12778 10793 1154A 1157A 0164B 1875 1876 0105 0161C 2826 1163 4164 1316 1161 1322 1456 1167A 0166A 1215 1162A 10968 1471 PART NAME QTY. REMARKS WEAR RING 1 FLANGE BEARING 1 THRUST COLLAR ............................................................. 1 ...........
JA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 39 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 22 0Z. QTY. 1 19 33 40 GEARBOX ASSEMBLY 41 GASKET/SEAL KIT 42 BEARING KIT GEARBOX REQUIRES 22 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
JA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. NO. 1% * 2% 3% 4% * 5% PART NO.
JA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. 1 2 1 36 37 12 13 3 8 4 39 5 4 6 34 7 38 11 9 7 6 14 2 10 15 17 31 32 16 18 30 6 19 20 GEARBOX OIL 22 0Z. QTY. 1 19 33 40 GEARBOX ASSEMBLY 41 GASKET/SEAL KIT 42 BEARING KIT GEARBOX REQUIRES 22 OZ. OF LUBRICATING OIL FOR OPERATION. 18 32 31 22 1 APPLY THREAD LOCK (LOCTITE 242 BLUE OR EQUIVALENT). 2 APPLY SEALANT (LOCTITE 572 OR EQUIVALENT). 3 TORQUE TO 15 LB/FT.
JA-SERIES TROWEL — GEARBOX AND ENGINE MOUNTS ASSY. GEARBOX AND ENGINE MOUNTS ASSY. NO. 30 31 32 33 34 36 37 38 39 40 41 42 PART NO. 1150 20802 20803 20801 20796 1954 1942 1247 1245 20394 21046 21047 PART NAME QTY. REMARKS ARM, YOKE 1 RING, SNAP, TRUARC 5100-37 OR EQUIV. 2 SPACER, .50 OD X .40 ID X 0.25L 2 PIN, YOKE 1 GUARD RING ASSY., JA 1 FRONT ENGINE MOUNT 1 REAR ENGINE MOUNT 1 GROMMET 1/4 X .875 ID X 1-5/8 OD 4 SPACER, GUARD RING 4 GEARBOX ASSY., JA ............................................ 1 ......
JA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 5.5 HP HONDA, 6 HP ROBIN, & 5.5 HP BRIGGS AND STRATTON ASSY. PAGE 56 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — ENGINES, HONDA, ROBIN, BRIGGS & STRATTON ENGINES, 5.5 HP HONDA, 6 HP ROBIN, & 5.5 HP BRIGGS AND STRATTON ASSY. NO. 1 1 1 2 3 4 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 12 13 14 15 16 17 18 19 20 21 PART NO. 1255 1386 20468 0310 0255 0256 0251 0458 0454 0855 0253 0457 0456 1390 1243 0740 D6005 0181B 2577 0300B 0161C 10181 1391 28 1390 PART NAME QTY. REMARKS ENGINE 6 HP ROBIN 1 ENGINE 5.5 HP HONDA 1 ENGINE 5.5 HP BRIGGS & STRATTON 1 SQUARE KEY 1/4X1/4X1.1/2" 1 AUTOMATIC CLUTCH ASSY. 1" BORE ...
JA-SERIES TROWEL — HAND CLUTCH ASSY. HAND CLUTCH ASSY. 1 28 29 2 30 13 4 3 27 4 6 10 5 9 25 24 12 26 23 7 22 21 14 4 20 19 11 31 1 8 8 16 17 16 18 15 32 SEE GEARBOX AND ENGINE 1 MOUNTS ITEM 36 PAGE 52. PAGE 58 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — HAND CLUTCH ASSY. HAND CLUTCH ASSY. NO. 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PART NO. 1386 1255 10036 6014C 0300B 10181 10450 0627 0181B 1672 10936 4538 11043 1512 10831 11046 0730 0152-3 11049 0740 10229 0161C 10897 1284 10935 20981 13351 20977 1488 1475 1273 1834 0949 0948 PART NAME ENGINE 5.5 HP HONDA ENGINE 6 HP ROBIN CLUTCH ASSIST HANDLE ASSY. HEX FINISH NUT 5/16-24 FLAT WASHER 5/16” HHC 5/16-24 X1.
JA-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. 2 1 PAGE 60 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — GUARD RING ASSY. GUARD RING ASSY. NO. PART NO. PART NAME 1 2 2 20796 1489 1490 STATIONARY GUARD RING 1 SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 3-BLADE MODEL SPIDER PLATE ASSY 16-1/2" ARM (EXT) .......................... 1 ............ 4-BLADE MODEL QTY. REMARKS JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. (OPTIONS) BLADES & ADJUSTMENT FIXTURE ASSY. PAGE 62 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — BLADES & ADJUSTMENT FIXTURE ASSY. BLADES & ADJUSTMENT FIXTURE ASSY. NO. PART NO. PART NAME 20 20 21 22 22 23 24 26 30 31 32 33 34 35 36 39 39 40 40 41 42 46 47 49 50 0202 0201 1434 1237 0490 0487 0489 0488 QTY. REMARKS COMBO FLOAT & FINISH BLADE .......................... 3,4 ...... CONTACT UNIT SALES DEPT./ACCESSORY ITEM ENDURO COMBO FLOAT &FINISH BLADE .......... 3,4 ...... CONTACT UNIT SALES DEPT./ACCESSORY ITEM FLOAT BLADE ........................................................
JA-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) PAGE 64 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
JA-SERIES TROWEL — LIFTING BALE ASSY. (OPTION) LIFTING BALE ASSY. (OPTION) NO. PART NO. PART NAME QTY. REMARKS 1 LIFTING BALE ASSY. .................... 1 .......... CONTACT UNIT SALES DEPT./ACC. ITEM 2 10229 HHCS 5/16-24X1" 4 3 0161C LOCK WASHER 5/16" 4 4 LIFTING BALE ASSY. .................... 1 .......... CONTACT UNIT SALES DEPT. /ACC. ITEM 5 0205 HHCS 3/8-16X1" 3 7 0166A LOCK WASHER 3/8" 3 8 1897 SPACER (ROBIN ENGINE) 4 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 66 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 14 15 12210ZH8000 12204ZE1306 12205ZE1315 12216ZE5300 12251ZF1800 12310ZE1010 12391ZE1000 15721ZH8000 90016ZE1000 90043ZE1020 90047ZE1000 9430110160 957230806000 9807956846 9807956855 CYLINDER HEAD, COMP .............................. 1 ........... INCLUDES ITEMS W/ GUIDE, IN. VALVE (OVER SIZE) 1 GUIDE, EX.
HONDA GX160K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 68 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO PART NO PART NAME 1 2 4 5 # 7 # 8 9 10 11 12 13 14% 15% 18 19 06165ZE1000 12000ZH8010 16510ZE1000 16511ZE1000 16513ZE1000 16531ZE1000 16541ZE1000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91001ZF1003 91202883005 9410106800 9425108000 GOVERNOR KIT ........................................................ 1 .......... INCLUDES ITEMS W/ CYLINDER BARREL ASSY. ....................................... 1 ..........
HONDA GX160K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 70 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO PART NO PART NAME 1 3 4 5 7 8 9# 10% 11 12 13 14 11300ZE1641 11381ZH8801 15600ZE1003 15600ZG4003 15620ZG4910 15621896010 15625ZE1000 15625ZE1003 91202883005 9430108140 957010803200 961006205010 COVER ASSY, CRANKCASE (U TYPE) .......... 1 ..........INCLUDES ITEMS W/ GASKET CASE COVER 1 CAP ASSY, OIL FILLER 1 INCLUDES ITEMS W/# CAP ASSY, OIL FILLER ................................... 1 ..........
HONDA GX160K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 72 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO PART NO PART NAME 3 9 13310ZE1601 90745ZE1600 CRANKSHAFT COMP.,(Q TYPE) KEY (4.78X4.78X38) QTY. REMARKS 1 1 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — PISTON RINGS ASSY. PISTON ASSY. PAGE 74 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — PISTON RINGS ASSY. PISTON RINGS ASSY. NO 1 2 3 4 5 6 * PART NO 13010ZF1023 13011ZF1023 13012ZF1023 13013ZF1023 13101ZH8000 13102ZH8000 13103ZH8000 13104ZH8000 13111ZE1000 132A0ZE1000 90001ZE1000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (0.25) 1 RING SET, PISTON (0.50) 1 RING SET, PISTON (0.75) 1 PISTON (STD) 1 PISTON (0.25) 1 PISTON (0.50) 1 PISTON (0.75) 1 PIN, PISTON 1 ROD ASSY, CONNECTING ............................ 1 ..........
HONDA GX160K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 76 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 14100ZE1812 14410ZE1010 14431ZE1000 14441ZE1010 14451ZE1013 14568ZE1000 14711ZF1000 14721ZF1000 14751ZF1000 14771ZE1000 14773ZE1000 14781ZE1000 14791ZE1010 90012ZE0010 90206ZE1000 CAMPSHAFT ASSY. ........................................ 1 .......... INCLUDES ITEMS W/ ROD, PUSH 2 ARM, VALVE ROCKER 2 LIFTER, VALVE 2 PIVOT, ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN. 1 VALVE, EX.
HONDA GX160K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 78 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 28400ZH8013ZB 28410ZH8003ZB 28420ZH8013 28422ZH8013 28433ZH8003 28441ZH8003 28442ZH8003 28443ZH8003 28461ZH8003 28462ZH8003 90003ZH8003 957010600800 STARTER ASSY, RECOIL NH1(BLACK) ........ 1 .......... INCLUDES ITEMS W/ CASE COMP.
HONDA GX160K1QA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 80 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO PART NO PART NAME 2 4 8 11 13 14 19610ZE1000ZC 19612ZH8000 19630ZH8000 36100ZE1015 90013883000 90022888010 COVER COMP., FAN NH1(BLACK) PLATE, SIDE(STD) SHROUD COMP. SWITCH ASSY., ENGINE BOLT, FLANGE 6X12 BOLT, FLANGE 6X20 QTY. REMARKS 1 1 1 1 6 1 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 82 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY.
HONDA GX160K1QA2 ENGINE — AIR CLEANER ( OIL BATH ) ASSY. AIR CLEANER (OIL BATH ) ASSY. PAGE 84 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — AIR CLEANER ( OIL BATH ) ASSY. AIR CLEANER (OIL BATH ) ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 12 13 16271ZE1000 17238ZE7010 17239ZE1000 17401ZE1810 17402ZE1810 17403ZE1810 17404841000 17410ZE1020 17421ZE1000 90201415000 90325044000 957010602000 GASKET ELBOW 1 COLLAR AIR CLEANER 2 COLLAR B AIR CLEANER 1 BODY CLEANER OIL BATH 1 PAN CLEANER OIL OIL BATH 1 AIR CLEANER ELEMENT OIL BATH 1 GRID AIR CLEANER 1 ELBOW COMP. AIR CLEANER .................... 1 ..........
HONDA GX160K1 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 86 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO PART NO PART NAME 1 3 6 7 8 9 11 12 14 15 18310ZH8810 18320ZF1H01 18340ZE1010 18355ZE1000 18381ZH8800 18522ZE1000 90050ZE1000 90055ZE1000 90183671003 94001080000S MUFFLER COMP. PROTECTOR, MUFFLER DEFLECTOR COMP. ARRESTER, SPARK GASKET, MUFFLER GUIDE, MUFFLER SCREW, TAPPING 5X8 SCREW, TAPPING 4X6 SCREW, TAPPING 4X8 NUT, HEX (8MM) QTY. REMARKS 1 1 1 1 1 1 4 1 2 2 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FUEL TANK ASSY. PAGE 88 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO PART NO PART NAME 1 2 3 5 6# 7 10 11 12 13 14 15 16854ZH8000 16955ZE1000 17510ZE1020ZF 17620ZH7013 17631ZH7003 17672ZE2W01 89218ZE1000 91353671003 9405006000 950014500840M 9500202080 957010602500 RUBBER, SUPPORTER 1 JOINT, FUEL TANK 1 TANK COMP., FUEL NH1 (BLACK) 1 CAP COMP., FUEL FILLER ............................. 1 .......... INCLUDES ITEMS W/# GASKET, FUEL FILLER CAP 1 FILTER, FUEL 1 WRENCH COMP.
HONDA GX160K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 90 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO PART NO PART NAME 1 2 3 5 13331357000 19511ZE1000 28450ZH8811 31100ZE1000 31100ZE1810 90201878003 KEY, SPECIAL WOOD RUFF, 25X18 FAN, COOLING PULLEY COMP., STARTER FLYWHEEL COMP. FLYWHEEL COMP., LAMP NUT, SPECIAL, 14MM 8 QTY. REMARKS 1 1 1 1 1 1 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 92 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO PART NO PART NAME 1 2 7 11 30500ZE1033 30700ZE1013 36101ZE1010 90121952000 COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR WIRE, STOP SWITCH (370MM) BOLT, FLANGE, 6X25 QTY. REMARKS 1 1 1 2 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 94 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO PART NO PART NAME 2 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 22 23 24 16500ZH8821 16551ZE0010 16555ZE1000 16561ZE1020 16562ZE1020 16571ZH8000 16574ZE1000 16575ZH8000 16576891000 16578ZE1000 16580ZH8811 16584883300 16592ZE1810 90013883000 90015ZE5010 90114SA0000 93500050250H 938930501600 9405006000 CONTROL ASSY., REMOTE .......................... 1 ..........
HONDA GX160K1QA2 ENGINE — LABEL ASSY. LABEL ASSY. PAGE 96 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — LABEL ASSY. LABEL ASSY. NO PART NO PART NAME 1 2 3 6 7 87521ZH8010 87522ZE1810 87522ZH9000 87258ZE1810 87530ZH8810 EMBLEM, INTERNAL MARK, CAUTION EXTERNAL LABEL, CAUTION MARK, CHOKE LABEL, SPECIFICATION EXTERNAL QTY. REMARKS 1 1 1 1 1 JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
NOTE PAGE PAGE 98 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
HONDA GX160K1QA2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO PART NO PART NAME 1 2 3 4 5 6 06111ZH8405 11381ZH8801 12251ZF1800 12391ZE1000 16212ZH8800 16221ZH8801 18381ZH8800 GASKET KIT .................................................... 1 .......... INCLUDES ITEMS W/ GASKET, CASE COVER NON ASBEST 1 GASKET, CYLINDER HEAD 1 GASKET, CYLINDER HEAD COVER 1 GASKET, INSULATOR 1 GASKET, CARBURATOR 1 GASKET, MUFFLER 1 * * * * * * QTY.
ROBIN EH-17 ENGINE — CRANKCASE ASSY. CRANKCASE GROUP ASSY. PAGE 100 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — CRANKCASE ASSY. CRANKCASE GROUP ASSY. NO. 10 20% 30 * 40 * 50 * 60% 70% 71% 80 90 210 220+ 230+ 250 260 270 280 290 300 330 340 610 620 630 680 690 700 710 810 820 830 840 850 960 PART NO.
ROBIN EH-17 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 102 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 10 40 50 60 70 310 320 * 350 360 370 380 PART NO. 2532090101 0230250110 0230250120 0230250130 0221814000 0032014000 0323030010 2532250120 2512300103 2692330103 2692340103 2692340203 2692340303 2532350117 2532350217 2532350317 0565160010 PART NAME QTY. REMARKS CRANKSHAFT CP .................................... 1 ............. SAE 3/4”KEYED SHAFT TYPE SPACER T=0.6 .......................................... 1 .............
ROBIN EH-17 ENGINE — INTAKE AND EXHAUST ASSY. INTAKE AND EXHAUST ASSY. PAGE 104 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — INTAKE AND EXHAUST ASSY. INTAKE AND EXHAUST ASSY. NO. 10 35 * 36 * 37 * 50 60 70 80 90 95 210 220 230 240 260 310 320 340 350 360 363 365 430 440 445 505 510 -2 510 -2 -13 -520 520 540 550 555 556 560 570 570 590 PART NO.
ROBIN EH-17 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. PAGE 106 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — GOVERNOR ASSY. GOVERNOR ASSY. NO. 10 20 25 30 40 50 60 70 80 310 310 320 * 320 330 * 340 345 346 350 360 370 380 380 410 440 450 PART NO. 2534230123 2274220103 0031108000 2534270101 2534280103 0031306000 0011406300 0186060020 2534250123 2694330200 2694330100 2694330201 2694330101 2274360103 2694350103 0043104300 2694550303 2274500203 0043106300 0022706000 0110060050 0110060030 2534420013 0043104080 0022706000 PART NAME QTY.
ROBIN EH-17 ENGINE — COOLING AND STARTING ASSY. COOLING AND STARTING ASSY. PAGE 108 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — COOLING AND STARTING ASSY. COOLING AND STARTING ASSY. NO. 10 20 40 45 90 210 -1 * -2 * -3 * -4 * -5 * -6 * -11 * -35 * -49 * 220 PART NO. 2535161201 2699170303 0110060020 0732004950 2535270103 2695020100 2705011508 2695012008 2695011008 2615010008 2705012508 2275013108 2695014508 2705026108 2275015208 0110060010 PART NAME QTY. REMARKS BLOWER HOUSING CP. ..........................1 .............
ROBIN EH-17 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 110 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 10 20 30 40 50 -1 * -2 * -3 * -4 * -9 * -13 * 70 80% 90% 105 PART NO. 2536010801 0732003900 0430430015 0641360010 0642008400 0642004220 0642006410 0642007810 0642008410 0642008420 0642004790 2696260101 2696800103 0561110020 0110060030 PART NAME QTY. REMARKS FUEL TANK CP. BLACK 1 LABEL, CAUTION 1 FUEL TANK CAP CP 1 FUEL, FILTER 1 FUEL, STRAINER ASSY. .........................1 .............
ROBIN EH-17 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 112 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 210 210 -1 * -2 * -3 * -5 * -6 * -8 * -9 * -11 * -12 * -13 * -14 * -15 * -16 * -17 * -18 * -19 * -20 * -22 * -32 * -40 * -41 * -61 * -62 * -82 * -89 * -101 * -121 * PART NO.
ROBIN EH-17 ENGINE — FLYWHEEL AND IGNITION ASSY. FLYWHEEL AND IGNITION ASSY. PAGE 114 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — FLYWHEEL AND IGNITION ASSY. FLYWHEEL AND IGNITION ASSY. NO. 10 11 30 60 70 90 100 110 PART NO. 2697933001 2697943001 0011406250 0660000361 0150040090 0566000190 0566120050 0650140031 0650140150 0650141030 0655000051 PART NAME QTY. REMARKS FLYWHEEL CP 1 IGNITION COIL CP 1 BOLT AND WASHER ASSY. 2 SWITCH ASSY. 1 TAPPING SCREW 2 CLAMP 1 CLAMP .....................................................1 ............. W/OIL SENSOR SPARK PLUG ...........................................1 ..........
ROBIN EH-17 ENGINE — OIL SENSOR ASSY. OIL SENSOR ASSY. PAGE 116 — JA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV.
ROBIN EH-17 ENGINE — OIL SENSOR ASSY. OIL SENSOR ASSY. NO. 700 760 765 770 790 795 PART NO. KS31102211 2147312201 2067550101 2077500101 2147900301 0011008160 PART NAME QTY. REMARKS OIL SENSOR CP 13 .................................1 ............. W/OIL SENSOR WIRE 22 CP .............................................1 ............. W/OILSENSOR CLAMP CP ...............................................1 ............. W/OIL SENSOR CLAMP CP ...............................................1 .............
TERMS AND CONDITIONS OF SALE — PARTS Effective: July 1, 2000 PAYMENT TERMS 4. Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier. Freight is at the sender’s expense.
NOTE PAGE JA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV.
PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MULTIQUIP INC.
