Operation and Parts Manual SERIES MODEL hhn31vTCSL5 ride-on power trowel (B & S VANGUARD DM950 GASOLINE ENGINE) Revision #8 (05/03/12) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Proposition 65 Warning Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystalline silicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
Silicosis/Respiratory Warnings WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
Table of Contents HHN31VTCSL5 Ride-On Power Trowel Proposition 65 Warning............................................ 2 Silicosis/Respiratory Warnings................................. 3 Table Of Contents..................................................... 4 Parts Ordering Procedures....................................... 5 Training Checklist..................................................... 6 Daily Pre-Operation Checklist.................................. 7 Safety Information..........................
www.multiquip.com Parts Ordering Procedures Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
training checklist Training Checklist No, Description 1 Read operation manual completely. 2 Machine layout, location of components, checking of engine oil levels. 3 Fuel system, refueling procedure. 4 Operation of spray and lights. 5 Operation of controls (machine not running). 6 Safety controls, safety stop switch operation. 7 Emergency stop procedures. 8 Startup of machine, pre-heat, engine choke. 9 Maintaining a hover. 10 Maneuvering. 11 Pitching. 12 Matching blade pitch.
daily pre-operation checklist Daily pre-Operation Checklist 1 Engine oil level 2 Condition of blades 3 Blade pitch operation 4 Safety stop switch operation 5 Steering control operation HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
Safety Information Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
Safety Information geNeRaL SaFeTy CauTION NeVeR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. Avoid wearing jewelry or loose fitting clothes that may snag on the controls or moving parts as this can cause serious injury. NeVeR operate this equipment when not feeling well due to fatigue, illness or when under medication.
Safety Information TROWeL SaFeTy NOTICE aLWayS keep the machine in proper running condition. DaNgeR Engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. The engine of this equipment requires an adequate free flow of cooling air. NeVeR operate this equipment in any enclosed or narrow area where free flow of the air is restricted.
Safety Information NOTICE NeVeR run engine without an air filter or with a dirty air filter. Severe engine damage may occur. Service air filter frequently to prevent engine malfunction. NeVeR tamper with the factory settings of the engine or engine governor. Damage to the engine or equipment can result if operating in speed ranges above the maximum allowable. FueL SaFeTy DaNgeR BaTTeRy SaFeTy DaNgeR DO NOT drop the battery. There is a possibility that the battery will explode.
Safety Information TRaNSpORTINg SaFeTy CauTION NeVeR allow any person or animal to stand underneath the equipment while lifting. Ride-on trowels are very heavy and awkward to move around. Use proper heavy lifting procedures and DO NOT attempt to lift the trowel by the guard rings. NOTICE The easiest way to lift the trowel is to utilize the lift loops that are welded to the frame. These lift loops are located to the left and right sides of the operator’s seat.
Safety Information Trailer should be adjusted to a level position at all times when towing. Raise and lock trailer wheel stand in up position when towing. Place chock blocks underneath wheel to prevent rolling while parked. Place support blocks underneath the trailer’s bumper to prevent tipping while parked. Use the trailer’s swivel jack to adjust the trailer height to a level position while parked. eNVIRONmeNTaL SaFeTy NOTICE Dispose of hazardous waste properly.
SPECIFICATIONS/DIMENSIONS C HEIGHT 1 B WIDTH A LENGTH Figure 1. HHN31VTCSL5 Dimensions Table 1. HHN31VTCSL5 Dimensions/Specifications Specification Parameter HNN31V (Vanguard) A–Length – in. (cm) 97.0 (246.4) B–Width – in. (cm) 50.0 (127) 1 46.0 (117) C–Height – in. (cm) Weight – lbs. (kgs.) Operating 1,042 (477) Weight – lbs. (kgs.) Shipping 1,224 (555) Engine – H.P. 31 Fuel Tank – gallons (liters) 5 (19) Rotor – RPM 60 to 160 Path Width – in.
SPECIFICATIONS Table 2. Noise and Vibration Emissions Guaranteed ISO 11201:2010 Based Sound Pressure Level at Operator Station in dB(A) Guaranteed ISO 3744:2010 Based Sound Power Level in dB(A) Whole Body Vibration Per ISO 2631-1:1997+A1:2010 in m/s2 ∑A(8) 97 117 0.19 NOTES: 1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 226:2003 (ANSI S1.4-1981). They are measured with the operating condition of the machine which generates the most repeatable but highest values of the sound levels.
general information HHN RIDE-ON TROWEL FAMILIARIZATION The HHN series Ride-On Power Trowel is designed for the floating and finishing of concrete slabs. Take a walk around the HHN Ride-On Power Trowel. Take notice of all the major components (see Figure 2 and Figure 3) like the engine, blades, air cleaner, fuel system, fuel shutoff valve, ignition switch etc. Check that there is always oil in the engine, and gear oil in the gear box assembly. Read all the safety instructions carefully.
NOTES HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
components 10. Water Indicator Light — Lights red when water temperature is high. 11. Charge Indicator — Lights red when electrical system is not charging properly. 12. Hour Meter — Indicates number of hours the key switch is in the "ON" position. 13. Choke Control Lever — In cold weather pull this lever forward about half way to start engine. After engine warms push knob all the way in. 14. Fuel Gauge/Filler Cap — Indicates the amount of fuel in the fuel tank. Remove this cap to add fuel. 15.
components 20. EZ- Mover Boss — Front -side insertion point for EZ Mover. Used when the transporting of the trowel is required. 21. Radiator/Filler Cap — Holds coolant or water necessary to keep engine at a safe operating temperature. Remove this cap to add water or antifreeze. DO NOT revove this cap when the engine is warm. 22. Lift Loops — Located on both the left and right sides of the main frame. Used when the trowel must be lifted onto a concrete slab. 23.
new machine setup The purpose of this section is to assist the user in setting up a NEW trowel. If the trowel is already assembled, (seats, handles, knobs and battery), this section can be skipped. NOTICE A new ride-on trowel cannot be put into service until the following installation instructions are completed. These instructions only need to be performed at the time of unpacking a NEW trowel. Before packaging and shipping, this ride-on power trowel was run and tested at the factory.
BASIC ENGINE 1 2 3 7 14 13 4 6 5 12 8 9 11 10 10 Figure 5. Engine Components INITIAL SERVICING The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer’s engine manual for instructions and details of operation and servicing. The engine shown above is a Briggs & Stratton Vanguard Gasoline engine. Operation for other types of engines may vary somewhat. 8.
inspection This section is intended to assist the operator with the initial inspection of the HHN trowel. It is extremely important that this section be read carefully before attempting to use the trowel in the field. DO NOT use your trowel until this section is thoroughly understood. CAUTION Failure to understand the operation of the HHN trowel could result in severe damage to the trowel or personal injury. See Figure 2 and Figure 3 for the location of any control or indicator referenced in this manual.
operation Starting the Engine 1. Place one foot on the trowel’s platform, grab ahold of any part of the frame, lift yourself onto the trowel, then sit down in the operator’s seat. NOTICE The HHN31V trowel is equipped with a safety stop switch that will not allow the engine to start unless an operator is sitting in the operator’s seat. The weight of an operator depresses an electrical switch, which allows the engine to start. WARNING NEVER disable or disconnect the safety stop switch.
operation steering Two control levers located in front of the operator’s seat provide directional control for the HHN trowel. Table 4 illustrates the various directional positions of the joysticks and their effect on the ride-on trowel. 4. Practice maneuvering the ride-on trowel using the information listed in Table 4. Try to practice controlled motions as if you were finishing a slab of concrete. Practice edging and covering a large area.
maintenance When performing maintenance on the trowel or engine, follow all safety messages and rules for safe operation stated at the beginning of this manual. See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. WARNING Accidental starts can cause severe injury or death. ALWAYS place the ON/OFF switch in the OFF position before performing maintenance. Disconnect negative battery cable from battery before servicing.
maintenance Engine Oil And Filter PRIMING PUMP 1. Change the engine oil and filter after the first 5 hours of use, then change oil every 6 months or 150 hours. O-RING 2. Remove the oil filler cap (Figure 5), and fill engine crankcase with recommended type oil as listed in Table 5. Fill to the upper limit of dipstick. DRAIN PLUG 3. Crankcase oil capacity with oil filter replacement is 6.72 qts. (7.4 liters). Oil Filter (300 Hours) 1.
maintenance battery/charging system DANGER Flammable, explosive gas. (produces hydrogen gas while charging or during operation). Keep area around battery well ventilated and keep from any fire source. Battery electrolyte contains corrosive, toxic chemical. (dilute sulfuric acid). Avoid contact with eyes and skin. Shock or fire due to electric shortcircuit. Disconnect battery cables before inspecting electrical system and never “spark” battery terminals to test for charge. 1.
maintenance (old style clutch) 1. Remove Drive Belt Guard Cover. See Figure 16. NOTICE This section is intended to aid users in the maintenance of drive assemblies with an old style Comet clutch. Checking The Drive Belt The drive belt needs to be changed as soon as it begins to show signs of wear. DO NOT reuse a belt under any circumstances. Indications of excessive belt wear are fraying, squealing when in use, belts that emit smoke or a burning rubber smell when in use.
maintenance (old style clutch) Installing Drive Belt (Using Replacement Drive Belt) 2. To replace the drive belt with the spare drive belt, remove the 2 bolts that secure the drive belt carrier. (Figure 19) This will allow free movement of the belt for installation. Take care with to not contaminate the relplacement belt with grease or dirt. The HHN31V Ride-On Power Trowel is equipped with a replacement drive belt (spare) carrier, which is mounted on the inboard side of the fuel tank near the clutch.
maintenance (old style clutch) Spare Drive Belt Replacement torque converter To replace a spare drive belt, be prepared to disconnect the CV-joint from the left-side gearbox. See Figure 20. The HHN31V trowel is equipped with a Torque Converter which supplies torque to both the left and right gear boxes. 1. Place the trowel on suitable supports and observe all safety precautions.
maintenance (old style clutch) As shown in Figure 22, centrifugal force pushes the roller arms (Figure 23) against the ramp plate, forcing the moveable face toward the fixed face and squeezing the belt Refer to Figure 25. A CENTRIFUGAL FORCE . How It Works B C DRIVE PULLEY DISTANCE MOVEABLE FACE TRAVELS DRIVE PULLEY LOW OUTPUT SPEED MOVEABLE FACE LOW ENGINE RPM MOVEABLE FACE DRIVE PULLEY DRIVEN PULLEY HIGH OUTPUT SPEED HIGH ENGINE RPM DRIVEN PULLEY NEUTRAL LOW SPEED HIGH SPEED Figure 25.
maintenance (old style clutch) Clutch This clutch system provides a high pulley ratio (a low gearso to speak) to start out and a low pulley ratio ( a high gear- so to speak) for a high speed operation, with infinite variation between the two. This means that it will not be necessary to give full throttle in order to “break the blades/pans loose”. The machine can slowly be brought up to speed. The torque sensitive pulley (Figure 26) utilizes a spring and cam bracket.
maintenance (new style clutch) belt measurement NOTICE This section is intended to aid users in the maintenance of drive assemblies with a new style Multi-Clutch. Checking The Drive Belt The drive belt needs to be changed as soon as it begins to show signs of wear. DO NOT reuse a belt under any circumstances. Indications of excessive belt wear are fraying, squealing when in use, belts that emit smoke or a burning rubber smell when in use.
maintenance (new style clutch) Removing the Drive Belt 1. Remove Drive Belt Cover. See Figure 16. 2. Disconnect the left-side CV Axle from the left-side gearbox and the lower drive pulley coupler. See Figure 28. CVT BELT (P/N 23365) NOTICE Note that the 3 bolts securing the CV axle to the coupler are shorter than those securing the CV axle to the gearbox. Remember bolt orientation for reassembly.
maintenance (new style clutch) how it works The Multi-Clutch functions much like a standard CVT system. As the engine RPM’s increase, the drive or primary clutch closes, forcing the belt to ride outwards on the drive sheaves. The closing of the drive clutch also forces the belt to open the driven or secondary sheaves. The opening and closing of these sheaves creates a ratio variation… hence CVT or Continuously Variable Transmission.
maintenance Blade Pitch Matching Blade Pitch for Both Sets of Blades Sometimes it may be necessary to match blade pitch between the two sets of blades. There are some signs that this may be necessary. For example, the differences in pitch could cause a noticeable difference in finish quality between the two sets of blades. Or, the difference in blade pitch could make the machine difficult to control.
maintenance Adjust the “high” bolts down to the level of the one that is not touching, or adjust the “low” bolt up to the level of the higher ones. If possible, adjust the low bolt up to the level of the rest of the bolts. This is the fastest way, but may not always work. Verify after adjustment the blades pitch correctly. Blades that are incorrectly adjusted often will not be able to pitch flat. This can occur if the adjusting bolts are raised too high.
maintenance Figure 33 illustrates “incorrect alignment,” worn spider bushings or bent trowel arms. Check that the adjustment bolt is barely touching (0.10" max. clearance) lower wear plate. All alignment bolts should be spaced the same distance from the lower wear plate. GEARBOX ADJUSTMENT BOLT “DISHED” EFFECT ON FINISHED CONCRETE LOWER WEAR PLATE SURFACE JAM NUT Figure 33.
maintenance Trowel arm removal 1. Remove the hardware securing the stabilizer ring to the trowel arm. (Figure 37) out with the trowel arm, remove the bushing from the trowel arm and set aside in a safe place. If the bushing is retained inside the spider plate, carefully remove the bushing. 5. Examine the bronze trowel arm bushing (Figure 37), and clean if necessary. Replace bushing if out-ofround or worn. BRONZE BUSHING Figure 39. Bronze Bushings 6.
maintenance TROWEL ARM FEELER GAUGE (.005 in./0.127 mm) FLAT TEST SURFACE FEELER GAUGE (.004 in./0.10 mm) Figure 41. Checking Trowel Arm Flatness 3. Next, check the clearance between the round shaft and the test surface as one of the flat hex sections of the arm rests on the test surface. Rotate the arm to each of the flat hex sections and check the clearance of the round shaft. Use a feeler gauge of .005" (0.127 mm).
maintenance Reassembly 1. Clean and examine the upper/lower wear plates and thrust collar. Examine the entire spider assembly. Wire brush any concrete or rust build-up. If any of the spider components are found to be damaged or out of round, replace them. 2. Make sure that the bronze trowel arm bushing is not damage or out of round. Clean the bushing if necessary. If the bronze bushing is damaged or worn, replace it. KNOB, TIE-DOWN Z-CLIP PANS TIE-DOWN, BLADE Z-CLIP, PAN BLADE ASSEMBLY 3.
troubleshooting Troubleshooting (Ride-On mechanical Trowel) Symptom Engine running rough or not at all. Safety stop switch not functioning. possible problem Stop switch malfunction? Make sure that the stop switch is functioning when the operator is seated. Replace switch if necessary. Fuel? Look at the fuel system. Make sure there is fuel being supplied to the engine. Check to ensure that the fuel filter is not clogged.
troubleshooting Troubleshooting (Ride-On mechanical Trowel) - continued Symptom Lights (optional) not working. Retardant spray (optional) not working. Steering is unresponsive. Operating position is uncomfortable. Power head on Electric Pitch (optional) not working. Linkage on Twin Pitch not working. Clutch slipping or sluggish response to engine speed change. possible problem Solution Wiring? Check all electrical connections in the lighting circuit.
troubleshooting Troubleshooting (engine) Symptom possible problem Solution Spark plug bridging? Check gap, insulation or replace spark plug. Carbon deposit on spark plug? Clean or replace spark plug. Short circuit due to deficient spark plug insulation? Check spark plug insulation, replace if worn. Improper spark plug gap? Set to proper gap. Fuel reaching carburetor? Check fuel line. Water in fuel tank? Flush or replace fuel tank. Fuel filter clogged? Replace fuel filter.
troubleshooting Troubleshooting (engine) - continued Symptom Weak in power, compression is proper and does not misfire. Weak in power, compression is proper but misfires. Engine overheats. Rotational speed fluctuates. Recoil starter malfunctions. (if applicable) Starter malfunctions. possible problem Air cleaner dirty? Clean or replace air cleaner. Improper level in carburetor? Check float adjustment, rebuild carburetor. Defective spark plug? Clean or replace spark plug.
wiring diagram BROWN 12 AWG IGNITION SWITCH RED 10 AWG WHITE 10 AWG WHITE 10 AWG I AD BC KJ P/N 11863 S CONNECT TO CHASSIS GROUND BLK WHT PURPLE 12 AWG LIGHT GREEN 12 AWG GOLD 12 AWG BLUE 12 AWG GREEN 12 AWG E1 P/N 11862 P3 FUEL PUMP E2 KILL SWITCH P1 P4 P2 BLUE NC WHITE 12 AWG OIL P15 P12 BLK YL P5 P6 BLK WATER BLK P13 P16 P5 P6 YL RETARDANT SPRAY SWITCHES RED WHITE 12 AWG BLUE BLK CHG STATUS INDICATOR LIGHTS BLK P14 P11 BLK CONNECT TO CHASSIS GROUND WH
notes HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
Explanation of Code in Remarks Column The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SampLe paRTS LIST NO. 1 2% 2% 3 4 paRT NO. paRT Name qTy. RemaRKS 12345 BOLT .....................1 .....
Suggested Spare Parts hhn31v ride-on power trowel with vanguard dm950 engine 1 to 3 units Qty. P/N Description 4.............0189...................... HANDLE GRIP 4.............2267...................... HANDLE GRIP (RIGHT SIDE) 1.............11430.................... SWITCH 2.............12460.................... CABLE, PITCH 1.............1617...................... LEVER ASSY. TROWEL ............................................. ADJUSTMENT 2.............2737...................... KNOB ASSY. 1.........
nameplates and decals 5 6 4 4 7 3 3 2 2 11 8 1 1 HHN SERIES 4 P 4 D O W ER CO AT E D 9 10 15 13 13 12 RETARDANT ONLY 12 14 page 50 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
nameplates and decals NO. PART NO. 1 11246 2 1499 3 2634 4 11246 5 12571 6 11247 7 11246 8 20198 9 13118 10 10818 11 12 11246 13 11246 14 11246 15 22088 PART NAME QTY. REMARKS DECAL: LIFT......................................................2................PART OF DECAL KIT12620 DECAL: MQ WHITEMAN (RED/TOWER) 2 DECAL: DANGER (COMPRESSION) 2 DECAL: LUBRICATION.....................................4................PART OF DECAL KIT12620 DECAL: OPERATING LIGHTS 1 DECAL: HELMET, HAND AND FOOT.............
pivot/gearbox (right side) assy. VIEW FROM OPERATOR’S SEAT 1 P 2 O W DER C O AT 3 E D 1 5 4 1 5 3 6 4 8 RIGHT-SIDE GEARBOX 9 NOTES: 1 SCREWS ARE PART OF RIGHT-SIDE GEARBOX ASSEMBLY. TO ORDER SCREWS USE P/N 9154 page 52 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
pivot/gearbox (right side) assy. NO. 1 2 3 4 5 6 7 8 9 PART NO. 1023 0166A 9154 12713 12725 12716 12704 12859 12856 PART NAME QTY. REMARKS SCREW, HHC 3/8 -16 X 1-1/4 8 WASHER, LOCK 3/8 MED 8 SCREW...............................................................4................PART OF GEARBOX ROCKER BLOCK 2 BLOCK, ROCKER 2 TRUNNION W/A 1 GEARBOX, COMPLETE 1 PLATE G.B. SPACER 1 BRACKET, DIRECTION CONTROL 1 HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
pivot/gearbox (left side) assy. 1 VIEW FROM OPERATOR’S SEAT P 2 O W DER C O AT E D 1 3 3 5 1 1 4 1 3 5 6 8 NOTES: LEFT-SIDE GEARBOX 1 9 2 10 2 2 2 SCREWS ARE PART OF LEFT-SIDE GEARBOX ASSEMBLY. TO ORDER SCREWS USE P/N 9154. USE ITEMS 9, 10 AND 11 TO MOUNT RIGHT-SIDE GEARBOX. 11 page 54 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
pivot/gearbox (left side) assy. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 1023 0166A 9154 12719 12725 12859 12703 12856 0176 0447 2549 PART NAME QTY. REMARKS SCREW, HHC 3/8 -16 X 1-1/4 8 WASHER, LOCK 3/8 MED 8 SCREW...............................................................4................PART OF GEARBOX PIVOT, GEAR BOX W/A 1 BLOCK, ROCKER 2 PLATE G.B. SPACER 1 GEARBOX, COMPLETE 1 BRACKET, DIRECTION CONTROL 1 NUT, NYLOC 1/2-13...........................................2................
gearbox assy. 31 21 35 11 30 45 4 20 1 3 29 1 17 15 3 5 46 39 24 32 36 9 14 7 28 20 13 44 30 4 23 42 21 40 31 4 2 BEARING KIT 10 24 41 25 3 6 18 26 22 32 43 16 38 1 8 4 18 33 2 24 43 12 19 2 4 37 27 USE SILICONE SEALANT 1 UNDER RETAINER; LOCTITE #30518. 2 TORQUE TO 30 FT-LBS. 3 USE SILICONE SEALANT AT SPLICE; LOCTITE #30518. 4 BEARING CONE FOR OLD STYLE GEARBOX IS NOT INCLUDED IN KIT.
gearbox assy. NO. PART NO.
gearbox assy. 31 21 35 11 30 45 4 20 1 3 29 1 17 15 3 5 46 39 24 32 36 9 14 7 28 20 13 44 30 4 23 42 21 40 31 4 2 BEARING KIT 10 24 41 25 3 6 18 26 22 32 43 16 38 1 8 4 18 33 2 24 43 12 19 2 4 37 27 USE SILICONE SEALANT 1 UNDER RETAINER; LOCTITE #30518. 2 TORQUE TO 30 FT-LBS. 3 USE SILICONE SEALANT AT SPLICE; LOCTITE #30518. 4 BEARING CONE FOR OLD STYLE GEARBOX IS NOT INCLUDED IN KIT.
gearbox assy. NO. 25$# 26$%# 27$# 28$@ 29$+ 30+ 30,$+ 31+ 32+$ 32,$ 33$% 34$% 35+$ 36$ 37$ 38$% 39$ 40+ 41 42 43 44 45 46,$ PART NO. 12700 12701 12702 12735 12736 12796 21801 12797 20932 21800 1313 26034 4196 911064 911329 9120 9154 20933 21854 21853 21853854INPUT 21853854INTER 21853854OUTER 12687 PART NAME QTY. REMARKS SEAL, CASE 0-RING HHN 0.103 X 46.
control steering (assist) 1 assy. RIGHT & LEFT STEERING CONTROLS FROM OPERATORíS SEAT 34 22 16 LEFT-SIDE GEARBOX 19 15 3 36 9 10 11 8 10 7 3 8 6 1 21 13 13 15 1 1 19 3 26 7 25 36 DETAIL A 19 3 6 9 15 15 36 3 36 19 16 9 9 RIGHT-SIDE GEARBOX 19 15 36 NOTES: SEE DETAIL A ON CONTROL STEERING 1 (ASSIST) 2 ASSY. CONNECT TO LOWER RIGHT HANDLE ASSY. 16 36 3 9 3 page 60 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
control steering (assist) 1 assy. NO. 1 3 6 7 8 9 10 11 13 14 15 16 19 21 22 25 26 34 36 PART NO.
control steering (assist) 2 assy. RIGHT & LEFT STEERING CONTROLS FROM OPERATORíS SEAT RIGHT LEFT 2 24 38 34 38 22 35 19 9 32 3 15 36 27 32 36 29 33 37 4 30 5 20 31 28 12 12 5 30 4 14 37 19 20 LOWER RIGHT HANDLE ASSY. 16 14 16 23 19 DETAIL A 14 17 NOTES: 1 SEE DETAIL A ON CONTROL STEERING (ASSIST) 1 ASSY. 1 18 page 62 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
control steering (assist) 2 assy. NO. 2 3 4 5 8 9 12 14 15 16 17 18 19 20 22 23 24 27 28 29 30 31 32 33 34 35 36 37 38 PART NO.
TWIN PITCH assy. 1 (LEFT/RIGHT) LEFT SIDE TWIN PITCH TOWER ASSEMBLY P/N 12386 ITEM 55 (VIEW FROM OPERATOR'S SEAT). 73 60 72 71 58 2 59 25 1 3 57 3 61 6 62 23 29 63 65 67 70 2 38 64 66 10 4 15 9 34 29 27 37 24 40 28 30 34 33 22 5 20 LEFT 36 11 7 1 35 RIGHT 2 69 14 20 12 LEFT 16 19 B 26 13 A CONTINUED ON TWIN PITCH ASSY. 2 SEE A , ITEM 32. CONTINUED ON TWIN PITCH ASSY. 2 SEE B , ITEM 31. 8 RIGHT 68 2 NOTES: LEVER ASSEMBLY, ITEM 57 1 INCLUDES ITEMS WITHIN OUTLINE.
TWIN PITCH assy. 1 (LEFT/RIGHT) NO. PART NO.
TWIN PITCH assy. 2 (LEFT/RIGHT) CONTINUED FROM A , ITEM 13 SEE TWIN PITCH 1 ASSY. CONTINUED FROM B , ITEM 19 SEE TWIN PITCH 1 ASSY. PART OF LEFT SIDE TWIN PITCH TOWER ASSEMBLY TYPICAL BOTH LEFT AND RIGHT SIDES 31 COMPLETE MITER BOX ASSEMBLY B 32 A 24 49 14 39 17 20 21 48 1 56 24 45 41 43 24 TO MITER BOX 20 3 42 53 24 49 2 47 29 50 43 44 52 3 51 3 45 NOTES: MITER BOX ASSEMBLY, ITEM 56 1 INCLUDES ITEMS WITHIN OUTLINE.
TWIN PITCH assy. 2 (LEFT/RIGHT) NO. PART NO. 3@+% 0181 B 14@+% 11583 15@+% 1162 A 16+% 12460 17 10548 20@+% 11654 21 1499 22+% 1529 23+% 1530 PART NAME QTY. REMARKS WASHER, LOCK, 1/4 MED 4 U-JOINT, PITCH CONTROL 2 CAP, GREASE ZERK 2 CABLE, PITCH ASM 1 TUBE, PITCH CONTROL W/A 1 PIN, ROLL 1/8 X 1 PLATED..............................5........... QTY. INCLUDES USAGE ON BOTH . ...................................................................................... TWIN PITCH ASSEMBLIES, AND . ..............
ENGINE mounting & throttle ASSY. 21 4 3 2 5 1 6 1 7 8 18 11 9 12 13 10 1 18 13 14 8 15 17 NOTES: TO THROTTLE FOOT 1 PEDAL ASSY. 8 16 19 20 page 68 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE mounting & throttle ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 0937 10237 11710 8133 2203 2153 11771 0161 C 2299 2124 10087 0447 0202 0300 B 5283 2866 12844 19468 12199 0183 11292 PART NAME NUT, HEX 10-32 WASHER, EXT. SHKP. #10 SPACER, ENG THROTTLE SCREW, RHM 10-32 X 3/4 WASHER, FLAT #10 ROD END, 10-32 FEMALE RH BRACKET, ENGINE THROTTLE CABLE WASHER, LOCK, 5/16 MED. SCREW, HHC M8-1.
ENGINE CRADLE MOUNTING ASSY. ENGINE MOUNT STUD BOLTS ARE WELDED TO ENGINE MOUNT HHN FRAME HHN FRAME ENGINE CRADLE MOUNT 1 2 3 2 4 3 5 6 2 7 page 70 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE CRADLE MOUNTING ASSY. NO. 1 2 3 4 5 6 7 PART NO. 20051 10136 1063 8156 12832 12831 10133 PART NAME CRADLE, ENGINE W/A WASHER, FLAT, 3/8 SAE NUT NYLOC 3/8-24 SCREW, HHC 3/8-16 X 2-1/2 WASHER, VIBRATION SNUB MOUNT, ENGINE VIBRATION NUT, NYLOC 3/8-18 QTY. 1 8 4 4 4 4 4 REMARKS HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE air cleaner/radiator ASSY. 13 12 3 4 5 1 2 11 4 1 10 3 3 5 4 9 8 6 4 6 4 15 4 14 4 3 1 6 4 6 NOTES: 1 PART OF NEGATIVE BATTERY CABLE 2 7 2 ITEMS WITHIN DASHED LINE (EXCEPT ITEM 7) ARE INCLUDED WITH ENGINE. REFER TO ENGINE PARTS MANUAL. 3 INCLUDED WITH MUFFLER CLAMP. page 72 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev. #8 (05/03/12) 4 INCLUDED WITH RADIATOR.
ENGINE air cleaner/radiator ASSY. NO. PART NO. 1 10434 2 12225 3 0948 4 0161 C 5 0730 6 12464 7 11900 8 12102 9 19266 10 12103 11 12 12450 13 60049 14 15 PART NAME QTY. REMARKS CLAMP, 2” HOSE 2 HOSE , AIR CLEANER MT 1 WASHER, FLAT, 1/4 SAE 8 WASHER, LOCK, 5/16 MED. 6 SCREW, HHC 1/4-20 X 1 2 SCREW, HHC M6-1.0 X 16mm 3 MOUNT, RADIATOR OVERFLOW 1 MOUNT, AIR CLEANER W/A 1 BLIND NUT 2 CLAMP, 31V AIR CLEANER ASM 1 SCREW...............................................................2................
ENGINE muffler ASSY. 1 2 MOUNT TO ENGINE EXHAUST PORT 8 3 13 4 5 11 10 6 9 6 7 6 8 12 page 74 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE muffler ASSY. NO. 1 2 3 4 5 6 7 7 8 9 10 11 12 13 PART NO. 20089 12848 12847 10114 0655 11819 12545 22579 11534 0161 C 1605 20082 20098 20178 PART NAME QTY. REMARKS MUFFLER, 31V 1 EXHAUST FLANGE NUT 4 EXHAUST GASKET 1 WASHER, EXT. SHKP, #8 2 SCREW, HHC 5/16-18 X 3/4 2 SCREW, HHC 1/4-20 X 3/4 W/WASH 7 PLATE, BELT GUARD SIDE.......................................1................COMET CLUTCH PLATE, BELT GUARD SIDE.......................................1................
ENGINE clutch ASSY. (old style) 1 13 12 1 10 8 11 3 9 8 2 7 NOTES: 1 TORQUE TO 150 FT. LBS 2 TORQUE TO 15 FT. LBS. BOLT IS INCLUDED WITH ENGINE. 3 COMET CLUTCH NO LONGER AVAILABLE page 76 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE clutch ASSY. (old style) NO. PART NO. 1 20138 7 3911758 8 20046 9 12878 10 20215 11 4703 12 20057 13 23291 PART NAME QTY. REMARKS BELT, CVT-VANGUARD COMET ...........................2................ORDER 2 BELTS FOR SPARES ADAPTOR, CLUTCH 31 HP VANGUARD 1 SCREW, HHC M8 125 X 25 MM GRADE 10.9 5 CLUTCH, CVT 1-7/16 COMET . .............................1................NO LONGER AVAILABLE . .................................................................................................
ENGINE clutch ASSY. (NEW style) 8 1 1 3 2 6 2 4 5 7 MULTI-CLUTCH UPGRADE KIT NOTES: 1 TORQUE TO 45 FT. LBS 2 TORQUE TO 34 FT. LBS page 78 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE clutch ASSY. (NEW style) NO. 1 2 3 4 5 6 7 8 PART NO. 23377 23369 23363-1 23365 23368 22021 22581 23371 PART NAME SCREW, HHC 7/16-20 X 6.5 WASHER, STEP 7/16 CLUTCH, UPPER, MULTI-CLUTCH BELT, CVT CLUTCH STUB SHAFT SCREW, HEX FLANGE M8 KIT, HHN CVT REPLACEMENT PULLER, MULTI-CLUTCH QTY. 1 1 1 2 1 5 1 1 REMARKS NOTICE Multi-Clutch components are not interchangeable with the prior Hoffco Comet drive system.
ENGINE FUEL ASSY. MOUNT FUEL PUMP TO BACK SIDE OF BATTERY BOX. 17 4 15 16 3 OLD STYLE FUEL TANK Y ER TT BA BOX 3 2 1 3 14 5 19 6 7 20 NEW STYLE FUEL TANK 8 10 9 CARBURETOR PART OF ENGINE FUEL FILTER LOCATED BEHIND BATTERY BOX 21 8 9 18 8 8 1 12 11 8 13 3 FUEL PUMP LOCATED BEHIND BATTERY BOX NOTES: 1 SECURE TO BATTERY BOX. 9 page 80 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
ENGINE FUEL ASSY. NO. 1 1 2 3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PART NO. 4514 1579 0161 C 0948 0948 11418 12404 19633 19661 19473 60013 11984 10024 0131 A 12497 0131 A 22588 10024 19266 22077 22205 22081 16185 PART NAME QTY. REMARKS SCREW, HHC 1/4-20 X 5/8............................... 4........OLD STYLE COMET CLUTCH SCREW, HHC 1/4-20 X .5................................. 4........NEW STYLE MULTI-CLUTCH WASHER, LOCK, 5/16 MED............................. 4........
DRIVE ASSY. (OLD STYLE) 25 4 RIGHT SIDE 11 5 28 1 8 3 6 26 10 7 23 13 24 9 7 14 6 15 17 19 4 20 2 19 21 5 2 20 12 22 1 TORQUE TO 12 FT-LBS. 1 18 27 16 11 4 5 12 LEFT SIDE page 82 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
DRIVE ASSY. (OLD STYLE) NO. 1 #@$ 2%#@$ 3# 4 #@$ 5 #@$ 6# 7# 8# 9# 10 # 11 # 12 # 13 # 14 # 15 # 16 # 17 # 18 # 19 #@$ 20 #@$ 21 #@$ 22 # 23 # 24 # 25 # 26 27# 28# PART NO. 2043 2259 10909 0126 2090 1146 2037 2029 10337 20044 2186 0161 C 20350 20043 20116 20184 12590 20056 2052 11108 60103 0243 10136 10133 20186 23449 23450 23451 PART NAME QTY. REMARKS SHAFT, CV JOINT BRT, 9-5/8 LONG 1 BOOT, C.V.
DRIVE ASSY. (new STYLE) 25 4 RIGHT SIDE 11 5 28 1 8 6 10 7 3 23 24 29 2 9 31 13 14 7 19 4 20 2 15 17 19 21 5 2 1 18 20 12 22 30 27 16 11 1 TORQUE TO 10 FT-LBS. 4 5 12 LEFT SIDE 2 NEW STYLE DRIVE ASSEMBLY MUST BE INSTALLED PER INSTRUCTION SHEET, P/N 23444, INCLUDED WITH MULTI-CLUTCH UPGRADE KIT page 84 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
DRIVE ASSY. (new STYLE) NO. 1@$ 2+@$ 3 4@$ 5@$ 6 7 8 9 10 11 12 13 14 15 16 17 18 19@$ 20@$ 21@$ 22 23 24 25 27 28 29 30 31 PART NO. 2043 2259 10909 0126 2090 1146 2037 2029 10337 23431 2186 0161 C 23363-2 23430 20116 20184 23433 9165 2052 11108 1662 0243 10136 10133 20186 23450 23451 20363 9092 11773 PART NAME QTY. REMARKS SHAFT, CV JOINT BRT, 9-5/8 LONG 1 BOOT, C.V.
spider assy. (left) LEFT-SIDE SPIDER ASSEMBLY (5-BLADE). VIEW FROM OPERATORS SEAT. 23 13 22 20 19 4 3 1 18 17 12 2 13 10 11 1 24 16 6 1 2 15 5 4 8 25 14 1 9 3 7 NOTES: APPLY LOCTITE P/N 1477 TO ITEMS 1 6, 14, AND 16. 2 TORQUE TO 90 FT. LBS. LEFT-SIDE SPIDER ASSEMBLY 3 P/N 12932 INCLUDES ALL ITEMS WITHIN OUTLINE. 4 PART OF ITEM 18 (P/N11431). page 86 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
spider assy. (left) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19+ 20 22 23 24 25 PART NO. 12932 2829 11903 0166 A 1876 0164 B 9006 11039 9111 1875 1322 21208 1162 A 11602 1456 12097 11419 11431 20426 2621 12687 12779 0105 0161C PART NAME QTY.
spider assy. (right) RIGHT-SIDE SPIDER ASSEMBLY (5-BLADE). VIEW FROM OPERATORS SEAT. 22 23 18 19 4 17 20 3 1 8 14 12 1 11 1 24 13 10 9 15 7 3 25 2 4 6 5 1 2 16 8 NOTES: APPLY LOCTITE P/N 1477 TO ITEMS 1 9, 12, AND 15. 2 TORQUE TO 90 FT. LBS. RIGHT-SIDE SPIDER ASSEMBLY 3 P/N 12933 INCLUDES ALL ITEMS WITHIN OUTLINE. 4 PART OF ITEM 18 (P/N11431). page 88 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
spider assy. (right) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19+ 20 22 23 24 25 PART NO. 12933 2829 11904 9006 2143 1875 1322 1162 A 11602 0166 A 1876 0164 B 11039 21208 12097 1456 11419 11431 20426 2621 12687 12779 0105 0161C PART NAME QTY.
stabilizer ring assy. 5 1 2 3 4 1 4 page 90 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
stabilizer ring assy. NO. 1 2 3 4 5 PART NO. 0161C 1237 1723 6014C 12095 PART NAME Lock Washer 5/16" SCREW, SCH 5/16-18 X 7/8 ROD END, 5/16-24 MALE NUT, HEX FINISH 5/16-24 RING, STABILIZER, EXT ARM, HD QTY. 5 5 4 8 1 REMARKS HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
seat and frame assy. 4 6 15 5 9 8 1 14 17 DIRECTION OF SEAT TILT. 3 2 1 7 11 13 NOTES: 16 12 1 INCLUDED WITH ITEM 7. page 92 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
seat and frame assy. NO. 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 PART NO. 0183 0300 10133 11286 11593 11660 12005 12987 4001 5054A 5218 5283 8081 8156 10176 3214 PART NAME PIN, COTTER 1/8X1 1/4 WASHER, FLAT, 5/16 SAE NUT, NYLOC 3/8-16 SEAT, ADJUSTABLE SPRING, SEAT PLATE, SEAT W/A HHN SWITCH, KILL FRAME, HNN SEAT W/A VAN WASHER, FLAT, 3/8 USS PLD WASHER, LOCK, 1/2 MED. SCREW, HHC 1/2-13X1 1/2 NUT, NYLOC 5/16-18 PIN, CLEVIS 1/2X2 3/4 SCREW, HHC 3/8-16X2 1/2 NUT, NYLOC 1/2-13 SCREW QTY.
frame and components VIEW FROM OPERATOR’S SEAT 12 14 9 11 2 15 10 13 P 2 6 O W 13 DER C O AT E D 8 4 7 1 3 17 16 page 94 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
frame and components NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO.
foot pedals assy. VIEW FROM OPERATOR’S SEAT 1 1 9 8 7 11 4 3 5 10 2 6 page 96 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
foot pedals assy. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 0202 0300B 10136 2086 2772 5283 6014B 12985 12986 3233 3083 PART NAME SCREW, HHC 5/16-18X1 WASHER, FLAT, 5/16 SAE WASHER, FLAT, 3/8 SAE PEDAL, ACCELERATOR PIN, ACC MOUNT NUT, NYLOC 5/16-18 PIN, COTTER 3/32X1 LEFT SIDE FOOT REST RIGHT SIDE FOOT REST WASHER, FENDER, 1.5odX3/8id SPACER QTY. 4 4 2 1 1 4 2 1 1 4 1 REMARKS HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
throttle foot pedal assy. THROTTLE BRACKET (PART OF ENGINE) 10 13 11 15 12 14 1 1 1 16 9 7 8 1 3 6 4 5 NOTES: 1 PART OF THROTTLE CABLE ASSY. 2 5 page 98 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
throttle foot pedal assy. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 0937 10018 10019 2153 2203 2753 2754 2755 2124 8133 2203 11710 0300 B 2153 10237 11771 PART NAME QTY. NUT, HEX 10-32 3 SCREW, SHC 10-32X1 NO PLATE 1 NUT, NYLOC 10-32 1 ROD END, 10-32 FEMALE RH 1 WASHER, FLAT, #10 2 SPRING, THROTTLE RETURN, LOWER 1 ADAPTOR, THROTTLE RET. SPRING LG. 1 ADAPTOR, THROTTLE RET.
battery assy. 13 5 11 12 9 STARTER 6 7 Y ER 8 RED CABLE (POSITIVE) TT BA BLACK CABLE (NEGATIVE) 9 3 CONNECT TO ENGINE GROUND 2 1 10 SEE SPRAY ASSEMBLY 2 4 3 page 100 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
battery assy. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 0730 0948 0949 10024 10031 10313 19303 10315 10318 11362 11692 11693 2509 PART NAME SCREW, HHC 1/4-20X1 WASHER, FLAT, 1/4SAE NUT, HEX FINISH 1/4-20 NUT, NYLOC 1/4-20 WASHER, EXT SHKP, 1/4 CABLE, NEG BATTERY BLACK 20” CABLE, POS BATTERY RED 48” BATTERY, 12V WET GROUP 22 BATTERY BOX, GROUP 24, W/LID BATTERY FRAME BOX BRACKET, BATTERY BOX HOLD DOWN BOLT, BATTERY BRKT NUT, WING 1/4-20 PLATED QTY.
SPRAY assy. 13 16 13 15 15 SPRAY BRACKET IS WELDED TO FOOT REST. 16 57" 12 14 16 1 2 14 5 17 4 25 14 14 57" 8" 17 18 8" 14 14 6 5 14 9 1 19 11 7 2 8" 1 8" 18 18 2 14 2 4 3 7 14 19 14 9 3 2 6 20 3 10 9 3 8 1 21 22 NOTES: 2 SPRAY PUMP MATING CONNECTOR SPRAY MOUNTING BRACKET IS WELDED TO FOOT REST. NO 1 MOUNTING HARDWARE IS REQUIRED. 2 SEE WIRING DIAGRAM PLACE SPRAY PUMP CONNECTOR 3 WIRES INSIDE BLACK SPIRAL SLEEVING.
SPRAY assy. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO. 0131 A 0181 B 0948 12548 10022 12008 12009 12403 19633 19661 2108 2898 2912 2918 2930 392292 60001 60002 60058 60221 2687 2680 PART NAME QTY.
FRONT PANEL assy. 11 19 3 16 7 9 14 5 3 13 8 15 1 30 23 3 27 2 EC 6 22 U 25 D 26 AT 0 0 CON 00 HO UR 0 8 S 14 1/1 0 20 PA TE 1 4 NT PE ND ING 24 11 2 29 12 28 20 14 29 23 28 17 21 NOTES: CHOKE CABLE ASSY. CONNECT 1 TO CARBURETOR LINKAGE ELECTRONIC CONTROL UNIT (ECU) 2 IS INCLUDED WITH ENGINE, SEE VANGUARD ENGINE OWNERíS MANUAL. page 104 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
FRONT PANEL assy. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 23 24 24 25 26 27 28 29 30 PART NO. 0202 0300B 10019 10114 10958 11098 11534 11819 11861 11912 12571 12018 19301 2203 2580 2673 3233 4682 5065B 5283 8381 10024 12017 11792 11078 11694 11247 0948 12287 825572 PART NAME QTY. REMARKS SCREW, HHC 5/16-18 X 1 2 WASHER, FLAT, 5/16 SAE 2 NUT, NYLOC 10-32 8 WASHER, EXT.
TOP RIGHT PANEL assy. 1 2 L OI TE WA R A CH E RG 3 page 106 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
TOP RIGHT PANEL assy. NO. 1 2 3 PART NO. 12307 12305 12571 PART NAME BULB, INDICATOR LIGHT PLUG INDICATOR LIGHT DECAL, OPERATING LIGHTS QTY. 3 3 1 REMARKS HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
E-Z MOVER AND LIFT HANDLE ASSY. 1 2 6 3 14 12 4 13 10 12 6 5 13 15 7 8 5 11 14 9 7 15 9 13 8 page 108 — HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
E-Z MOVER AND LIFT HANDLE ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 0189 2336 1869 7170 11684 10440 0655 0300B 2364 10445 4684 0183 10446 8151 0161C PART NAME HAND GRIP UPPER HANDLE SNAP PIN CLIP DOLLY AXLE WHEEL & TIRE SCREW, HHCS 5/16-18 x 3/4" FLAT WASHER 5/16" WHEEL FRAME FLAT WASHER 5/8" COTTER PIN FLAT WASHER 3/4" FLAT WASHER 3/4" SAE LOCK WASHER 5/16" QTY. 2 1 1 4 4 4 2 2 2 1 2 4 8 8 2 REMARKS EMR-2 E-Z MOVER ASSY — PURCHASE THROUGH MQ UNIT SALES DEPT.
Terms and Conditions of Sale — Parts paymeNT TeRmS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SpeCIaL expeDITINg SeRVICe Terms of payment for parts are net 30 days.
notes HHN31VTCSL5 RIDE-ON TROWEL • operation and parts manual — rev.
Operation and Parts Manual HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United StateS Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel.