Specifications

PAGE 12 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV. #1 (11/07/07)
CX-HF SERIES HAND MIXERS — COMPONENTS
Refer to Figure 1 for the location of the following mixer
components.
1. Ventilation Slits — These openings allow ventilation to
the unit to prevent overheating.
2. Safety Lock-off Button — Prevents the unit from being
operated accidentally.
3. Protection Frame — Protects the machine casing from
dirt and breakage.
4. ON/OFF Switch with Speed Control — Turns the power
on and off and regulates the mixing speed.
5. Gear Selection Lever — This lever is used to select the
gear (slow or fast) at which the unit is operating (not
applicable on CX100HF/CX100HFE).
6. Protection Frame Fastening Screws — Holds the
protection frame securely in place.
7. Machine Neck — The mixing tool is attached to the
machine neck.
8. HEXAFIX
®
Quick Action Coupling — This connector
attaches the mixing tool to the machine neck.
9. Mixing Tool — This tool is used to mix chemical building
products.
Figure 1. Mixer Major Components
1
2
4
3
6
7
5
8
9