Owner's Manual

10
11
CLEANING AND MAINTAINING YOUR ICED TEA MAKER
Cleaning your MR. COFFEE
®
Iced Tea Maker
Hard water can leave mineral deposits inside the pitcher and the brew
basket. To remove these, fill the brew basket and the pitcher with warm,
undiluted white household vinegar. Let soak for 20 minutes, then rinse.
Never use harsh, abrasive cleansers, steel wool pads or other abrasive
materials. They may cause scratches which can lead to breakage.
CAUTION! Never immerse the iced tea maker itself in water, in any other
liquid or in the dishwasher.
Decalcifying your MR. COFFEE
®
Iced Tea Maker
Mineral (calcium/limestone) found in the water will leave deposits in your
iced tea maker and will affect its performance. If you notice an increase in
steaming or if the pumping action stops before all of the water has been
pumped out of the appliance, it’s time to clean it. The frequency of cleaning
depends on the hardness (mineral content) of your tap water. Please see
the following chart:
It’s recommended that you regularly remove mineral deposits by using
MR. COFFEE
®
Cleaner or undiluted, white household vinegar. MR. COFFEE
®
Cleaner is available at many retail stores or by calling the MR. COFFEE
®
Consumer Service Department at 1-800-MR COFFEE (1-800-672-6333).
1. Follow package instructions to prepare one batch of MR. COFFEE
®
Cleaner.
Pour the mixture or one quart of undiluted, white household vinegar into
the water reservoir.
2. Place the pitcher lid on the pitcher and slide the pitcher into place under
the iced tea maker.
3. Push the “on” button to begin the brewing cycle. After one cup of cleaner
or vinegar has pumped into the pitcher, unplug the iced tea maker. Let it
stand for 30 minutes.
Suggested Cleaning Interval
Type of Water Cleaning Frequency
Soft Water Every 80 Brew Cycles
Hard Water Every 40 Brew Cycles
4. Plug in the iced tea maker again. Continue brewing process again to pump
out the remaining cleaner or vinegar.
5. When the iced tea maker shuts off, unplug it, remove the pitcher and
discard the cleaning solution.
6. Fill the pitcher with clean tap water to the 3-quart water level marked on
the pitcher and repeat Steps 1-5 without the cleaning solution. Repeat
this process if necessary.
Water Filtration Disk Replacement
Your water filtration disk will need to be replaced once a month (approx.
30 brew cycles). If the machine will not be in use for an extended period of
time, rinse the water filter with running water and clean the iced tea maker
before use.
SERVICE
Replacement Parts
• Coffee Filters – For better tasting iced tea, we recommend that you use a
MR. COFFEE
®
brand 4 cup basket paper filter. These filters are available at
most grocery stores.
• Pitchers – You can usually purchase a replacement pitcher from the store
where you purchased your iced tea maker. If you are unable to find a
replacement, please call 1-800-MR COFFEE (1-800-672-6333) in the U.S. or
1-800-667-8623 in Canada for information on where you can find a store
that carries replacement pitchers or visit www.mrcoffee.com
IF YOUR ICED TEA MAKER REQUIRES SERVICE, DO NOT RETURN
IT TO THE STORE WHERE YOU PURCHASED IT.
All repairs must be made by Sunbeam or by an authorized MR. COFFEE
®
Service Center. If you live in the U.S. or Canada, please call us at the following
toll-free telephone numbers to find the location of the nearest authorized
service center:
U.S. 1-800-MR COFFEE (1-800-672-6333)
Canada 1-800-667-8623
You may also visit our website at www.mrcoffee.com for a list of service centers.
To assist us in serving you, please have the iced tea maker model number
and date of purchase available when you call. We welcome your questions,
comments or suggestions. In all your communications, please include
your complete name, address and telephone number and a description
of the problem.
Visit our website at www.mrcoffee.com and discover the secret to brewing
the perfect cup of iced tea. You will also find a rich blend of gourmet recipes,
entertaining tips and the latest information on MR. COFFEE
®
products.