User`s guide

Enhanced calling the Last ID Number
Transmitted or Received
1. To call the last ID number transmitted or received,
press the (Call) button.
2. The display will show “PC” momentarily and then
the last ID or “------” if there is no last ID.
3. Press the PTT switch: the ID number is transmitted.
If the radio you are calling is on the air, you will hear
telephone type ring for 20 seconds, or until the called
radio answers the call.
Note:
If the radio you are calling is not in service, you will
not hear the ringing and the display will show "no
rESP". Go to step 6 to hang up.
4a. If the party you are calling does not answer the call
within twenty seconds, the display will show “no
AnS”; the telephone ringing will stop and an alert
tone will sound. At this point you can either send a
Call Alert™ page (go to step 1 of “Leaving a Call
Alert Page when the called party does not answer
the Private Conversation Call”), or go to step 6 of
this procedure to hang up.
or
4b. If the party you are calling does answer the call, you
will hear his/her voice.
5. Press the PTT switch to carry on a Private
Conversation with the called person.
6. When you have finished your conversation, or if the
radio you are calling does not answer or is not in
service, press the (Home) button to hang up; the
radio will return to the home display.
43 Trunked Enhanced Private
Conversation™ Call Operation
(900 MHz Only Cont.)