User`s manual
11
FX3U Series Programmable Controllers
User’s Manual - MODBUS Serial Communication Edition
1 Outline
1.4 Programming Tool Applicability
1
Outline
2
Specifications
3
System
Configuration
4
Wiring
5
Communication
Setup
6
Related
Devices and
Comm. Status
7
MODBUS
Standard
Commands
8
Master
Specification
9
Slave
Specification
10
Creating
Programs
1.4 Programming Tool Applicability
1.4.1 For applicable versions
The programming tool is applicable for each FX Series from the following version:
1. Japanese versions
3: Applicable (If applicable versions are limited, they are described inside ( ).) —: Not applicable
2. English versions
3: Applicable (If applicable versions are limited, they are described inside ( ).) —: Not applicable
Model name (Media model
name is shown below.)
Applicability
(applicable version)
Remarks
FX3U PLCs
GX Developer
SWD5C(F)-GPPW-J
3 (Ver. SW8 X or later)
Ver. 8.45X
Select the model "FX3U(C)".
Model name (Media model
name is shown below.)
Applicability
(applicable version)
Remarks
FX3U PLCs
GX Developer
SWD5C(F)-GPPW-E
3 (Ver. SW8 X or later)
Ver. 8.45X
Select the model "FX3U(C)".