Datasheet

 2010-2016 Microchip Technology Inc. DS40001412G-page 417
PIC18(L)F2X/4XK22
27.1 DC Characteristics: Supply Voltage, PIC18(L)F2X/4XK22
PIC18(L)F2X/4XK22
Standard Operating Conditions (unless otherwise
stated)
Operating temperature -40°C  T
A  +125°C
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
D001 V
DD
Supply Voltage PIC18LF2X/4XK22
1.8 — 3.6 V
PIC18F2X/4XK22
2.3 — 5.5 V
D002 V
DR RAM Data Retention Voltage
(1)
1.5 — — V
D003 V
POR
VDD Start Voltage to ensure internal
Power-on Reset signal
— — 0.7 V See section on Power-on Reset
for details
D004 SVDD
VDD Rise Rate to ensure internal
Power-on Reset signal
0.05 — — V/ms See section on Power-on Reset
for details
D005 V
BOR
Brown-out Reset Voltage
BORV<1:0> = 11
(2)
1.75 1.9 2.05 V
BORV<1:0> = 10 2.05 2.2 2.35 V
BORV<1:0> = 01 2.35 2.5 2.65 V
BORV<1:0> = 00
(3)
2.65 2.85 3.05 V
Note 1: This is the limit to which VDD can be lowered in Sleep mode, or during a device Reset, without losing RAM
data.
2: On PIC18(L)F2X/4XK22 devices with BOR enabled, operation is supported until a BOR occurs. This is
valid although V
DD may be below the minimum rated supply voltage.
3: With BOR enabled, full-speed operation (FOSC = 64 MHz or 48 MHz) is supported until a BOR occurs. This
is valid although V
DD may be below the minimum voltage for this frequency.