Operating instructions

39
APPENDIX A: OPTIONAL VEAM MULTIPIN CONNECTOR
The 500-HP subwoofer requires a grounded outlet. It is very
important that the system be properly grounded in order to
operate safely and properly. Figure 8 illustrates correct wir-
ing for the creation of power cables and distribution systems
for 500-HP subwoofers equipped with VEAM multipin con-
nectors.
For complete VEAM wiring conventions and pin-outs for AC,
audio, and RMS connections, refer to the Meyer Sound doc-
ument VEAM Cable Wiring Reference (PN 06.033.113.01).
Meyer Sound offers the VIM-4 VEAM interface module with
four VEAM connectors in the front and a single-phase
IEC 309 32-amp connector in the rear to distribute power,
audio, and RMS to 500-HP subwoofer systems equipped
with VEAM connectors.
Figure 8: VEAM Multipin Connector Pin-Outs for Power
Line (brown)
Ground (green/yellow)
Neutral (blue)
VIM-4 Module, Front and Rear Panels