Owner manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

4 Installation

940 Professional IC Vario ONE/SeS/Prep 1 (2.940.1410)

￭￭￭￭￭￭￭￭

Removing the handle

4.3 Removing transport locking screws

To avoid damage to the drives for the high-pressure pump and the vac-

uum pump during transport, the pumps are secured with transport lock-

ing screws. These are located at the rear of the instrument and labeled

with Transport security screws.

Remove these transport locking screws before the initial start-up.

Accessories

For this step you need:

￭ Hex key 4 mm (6.2621.030)