Installation & Assembly

Insert the backrest metal plates to both arms as shown
below. Ensuring it is correctly in place.
4 of 8 5 of 8
Secure both back cushions by locating the zipper end
s. Fasten both sides
and continue all the way to the end. Flip the pillow into position
when
finished.
Align all four legs into the pre-drilled holes and secure by
hand. Please avoid over-tightening
Locate the pre-drilled holes on the side of the body and match the orientation with the
correct armrest.
Now, carefully join armrest (with the three threaded rods exposed) with the body by
aligning and going through the three pre-drilled holes on the side of the body.
Open the compartment cover underneath the base and secure all three threaded rods
with flat washers, spring washers and nuts from inside with the spanner, making sure
there is no movement.
Repeat step for other armrest.