ORIGINAL INSTRUCTION MANUAL McGregor 1800W HIGH PRESSURE WASHER 7368484 (Model: MPW1810) Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your pressure washer, ensuring it is assembled correctly and safely.
Safety Information Contents Important - Please read these instructions fully before operating or maintaining Safety Information........................................................................................................................................3 Warning Symbols ...................................................................................................................................3 General safety....................................................................................
Safety Information Important - Please read these instructions fully before operating or maintaining Warning Symbols The following warning symbols appear through this manual and indicate the appropriate safety measures you should take when operating and maintaining the pressure washer. Warning Read the instruction manual Conforms to all relevant safety standards. Wear ear protections.
Safety Information Important - Please read these instructions fully before operating or maintaining General Safety IMPORTANT! - Keep this instruction manual in a safe place for future reference. - Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. - Never use the machine while people, especially children, or pets are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Safety Information Important - Please read these instructions fully before operating or maintaining Personal Safety (continued) please use only with a water backflow preventer or inlet hose-set approved by IEC 61770. - Risk of injection or injury, do not direct discharge stream at persons. - Do not use the appliance when there are other people around, unless they are also wearing safety equipment. - High-pressure jets can be dangerous if misused.
Safety Information Important - Please read these instructions fully before operating or maintaining Operating Safety (continued) by means of a cord reel which keeps the socket at least 60 mm above the ground. - The electric supply connection shall be made by a qualified electrician and comply with IEC 60364-1.
Safety Information Important - Please read these instructions fully before operating or maintaining vibration. - Do not use the appliance near flammable liquids or gases. In case of non-observance, there is a risk of fire of explosion. - Ensure that the mains voltage matches the information on the label. - Before each use, check the equipment, power cable and plug for damage, avoiding an electrical shock.
Safety Information Important - Please read these instructions fully before operating or maintaining Intended Use - The appliance may be damaged by frost. There is always residual water left inside the high-pressure washer and in the pump. Do not store the machine at temperatures below freezing point in order to avoid frost damage. This high-pressure cleaner is designed for domestic use only: - to clean machines, vehicles, buildings, tools, facades, terraces, garden equipment etc.
In the Box Parts A High pressure washer G Adjustable spray lance B Cable storage H Spray gun C Screw 4 pcs I Detergent bottle D Handle J Water inlet male connector E High pressure hose K Nozzle pin F Turbo lance L Instruction manual M Gun storage E F G D H B M C A J K I L If there are any parts missing, please call the customer helpline on 0345 605 2062 Customer Helpline 0345 605 2062 9
Assemble Preparing to assemble the pressure washer IMPORTANT! - Remove all parts of the pressure washer from the box and carefully remove all packaging. Take care not to lose any instructions which may be affixed to the parts. These provide important information which will be required while attached the pressure washer. - Keep all packaging until the pressure washer is fully assembled and has been operated successfully. - Always recycle the packaging in accordance with local recycling schemes.
Prepare Step 1 - Fit the high pressure hose to the washer WARNING! Always wear safety gloves when doing any work on the pressure washer. 3. Remove the plastic cover and then connect the high pressure hose to the pressure washer. Attach high pressure hose to the machine’s water outlet (hand tighten only). Step 2 - Fit the trigger gun to the high pressure hose Connect the hose and trigger gun. Screw the high pressure hose firmly onto the spray gun.
Prepare Step 4 - Assemble inlet adapter. Warning: Use a water filter if the inlet water is contained. Attach the inlet adapter to the machine’s water inlet. Hand tighten only. Step 5 - Connect garden hose and water supply. Attach garden hose to water supply and turn water on. Step 6 - Connect garden hose and inlet adapter. Before you attach your water hose (not included), run the water through to eliminate any air in the hose to avoid air locking.
Prepare Step 7 - Connect socket Make sure the ON/OFF switch is in the OFF position and your hands and plug are dry. Connect the plug to the mains socket. Note! We Recommend the use of a RCD Safety protection plug. Operate Step 1 - Starting WARNING! Wear suitable clothing, ears and eyes protecting when working with the equipment. Ensure that the equipment is functional before each use. Ensure that the mains voltage value matches the label on the equipment.
Operate Step 2 - Stopping 1. Release the trigger, and engage the safety lock. 2. Set the On/Off switch to OFF. 3. Close the water supply. Step 3 – Use the high pressure lance WARNING! - Always turn off the machine when changing the high pressure lance.-The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance with both hands. 1.
Operate Step 3 – Use the high pressure lance (continued) CAUTION! - Jet spray adjustment is very aggressive. Do not adjust while spraying. Switch the machine off when interrupting your work for extended periods of time. - The high-pressure pump starts running as soon as you operate the hand-held spray gun. The high-pressure pump stops running as soon as you release the trigger on the hand-held spray gun. 3. Use with adjustable spray lance, 180 degree rotation of the nozzle.
Operate Step 4 – Use the detergent bottle WARNING! In case of contact with detergents: rinse with an abundance of clean water Always turn off the machine when changing the detergent bottle. 1200ml 1. Unscrew the bottle cap of the detergent bottle. Fill the detergent to the detergent bottle. Screw on the bottle cap tight. 2. Fit the detergent bottle to the trigger gun. 3. Turn on the pressure washer. Pull trigger to operate unit.
Maintenance and Repair Maintenance and Repair WARNING! Always switch the product off, unplug from the power socket and let the product cool down before performing inspection, maintenance and cleaning work! Maintenance and Repair(continued) - After every use wipe the machine with a slight damp cloth. Do not clean the machine using a high-pressure water jet. - Clean the high-pressure jet nozzle. The pressure washer is equipped with a water filter to protect the pump.
Storing and transportation Clearing of the Lime scale From periods of time, water lime scale may build up on your lance outlet, use the Nozzle cleaning pin to clean this away Storing Frost can damage your pressure washer that has not been completely emptied of water. The machine should be stored in a frost free room. Do not kink high pressure hose.
Troubleshooting General Troubleshooting WARNING! - Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre or a similarly qualified specialist if you cannot solve the problem yourself! - Always turn off the machine and remove the plug before making any adjustment. Problem 1. No power Possible cause - Check the plug socket, cable, line and plug.
Technical data Technical Data Table Model MPW1810 Voltage Input power Working pressure Max pressure Rated flow Max flow Inlet Tmax Net weight Measured sound pressure level Guaranteed sound power level 230-240V~ /50Hz 1800W 10MPa 13MPa 5.2l/min 7l/min 40oC 9.5kg 83dB (A), k=3 dB (A) 95dB (A) Vibration 1.5m/s2 ,k=1.5m/s2 P INmax 0.6MPa Waterproof Rate IPX5 The declared vibration value has been measured in accordance with a standard test method and may be used for comparing one tool with another.
Recycling and disposal Recycling and disposal (continued) This symbol is known as the Crossed out Wheelie Bin Symbol. When this symbol is marked on a product or battery, it means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health.
Guarantee Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Claims must be accompanied by Proof of Purchase.
Customer Helpline 0345 605 2062 23
Customer Helpline 0345 605 2062