Datasheet

MAX16977

36V, 2A, 2.2MHz Step-Down Converter

with Low Operating Current

10Maxim Integrated

Pin Descriptions (continued)

Internal Block Diagram

NAME FUNCTION

TSSOP TQFN

10 8 SUP

Voltage Supply Input. SUP powers up the internal linear regulator. Connect a 1FF

capacitor to ground.

11, 12 9, 10 LX Inductor Switching Node. Connect a Schottky diode between LX and GND.

13, 14 11, 12 SUPSW

Internal High-Side Switch-Supply Input. SUPSW provides power to the internal switch.

Connect a 1FF and 4.7FF capacitor to ground.

15 13 EN

SUP Voltage-Compatible Enable Input. Drive EN low to disable the device. Drive EN

high to enable the device.

16 14 I.C. Internally Connected. Connect to ground for proper operation.

— — EP

Exposed Pad. Connect EP to a large-area contiguous copper ground plane for effective

power dissipation. Do not use as the only IC ground connection. EP must be connected

to GND.

MAX16977

FBSW

OUT COMP PGOOD EN

SOFT-

START

SLOPE

COMP

FBOK

EAMP

HSD

AON

LOGIC

REF

HVLDO

SWITCH-

OVER

OSC

PWM

SUP BIAS

BST

SUPSW

FSYNC FOSC