It's a karaoke Karaoke Machine Lento X5 party all night long
Performer’s Manual Karaoke Machine - Lento X5
5 Congratulations! You’ve just taken your party game up a notch Whether you’re celebrating with a few friends or with the whole gang— in the comfort of your home or in a big event space—your parties will be peppier with this beautifully-designed, comprehensive Lento X5 Karaoke Machine from Amasing. Choose from Bluetooth, AUX, FM, USB, or MicroSD and get the music going—or just connect to your TV. Sing out some show tunes with grandma, blast out some big hits with your pals, or serenade your sweetheart.
6 It’s the whole package! Parts & features 7 1 2 3 6 What’s included… 1x Amasing Karaoke Machine 2x Wireless microphones 1x Carry straps 1x Device holder (2 pcs) 1x Micro-USB charging cable 1x USB charger plug 1x 3.5 mm AUX cable 1x 3.
8 9 3 2 5 23 22 21 24 20 19 18 Take note: 17 Review before using 16 15 1 4 6 7 8 1. Main Power On/Off, LED On/Off, and Amp Power On/Off 2. Guitar Input 3. Guitar Volume 4. External Mic Input 5. DC5V/2A Disco Ball/External Charger Input 6. DC15V/2A Machine Charger Input 7. Charging Light Indicator 8. Mic Volume 9. Music Echo 10. Music Treble 11. Music Bass 9 10 11 13 12 14 12. Music Volume 13. AUX Input 14. DC12V Car Battery Input 15. TF MicroSD Card 16. USB Port 17. 18. 19. 20.
10 11 Let’s Begin... How to Assemble the Microphone Stand: Machine assembly The entire karaoke machine can easily be assembled and disassembled so that you can pack it up and take it on the go in just a few minutes! 1. Microphone Stand Begin with inserting the microphone pole 1 into the large hole on the top right of the karaoke machine. Microphone Stand Parts: 1 2 2. Next, connect the triangular bracket 2 to the top end of the microphone pole 1 . Microphone Pole 4 3.
12 13 Device Holder 4. Device Holder Parts: Attach both microphone clips 4 to each of the bendable arms 3 by twisting them tightly into place. 1 5. Place the microphones into the microphone clips 4 . 2 How to Assemble the Device Holder: 1. 6. 2. Adjust the height of the microphone pole 1 as desired by twisting the two knobs on the pole. Attach the now-constructed device holder by holding it in place at the position and height you desire on the microphone pole.
14 15 Disco Ball How to Assemble the Disco Ball: Disco Ball Parts: 1 To attach the disco ball, screw the pole clip screw 4 through the disco ball clasp 2 and the hole on the stand clip 5 2 Disco Ball 3 Disco Ball Clasp 4 2X Side Screws 5 2. Pole Clip Screw Screw on both sides of the disco ball 1 to the disco ball clasp 2 with a side screw 3 on each side and tighten them so that the disco ball sits securely in place. 6 Stand Clip Power Plug 3.
16 17 4. Plug in the DC5V/2A cable (power plug) 6 to its port on the machine and feed the wire through the large and small wire clips 7 that can be attached to the microphone pole. Disassembly & Transport • To disassemble the machine, remove all detachable components (e.g. disco ball, device holder, microphone stand) and place them in a suitable bag. • Using the shoulder straps provided, clip both ends to the sides of the main machine where there are bands to clip the strap into.
18 19 Ready, set, sing! Quick start guide #1 Charge the machine and microphones before each use. #2 Turn the machine and microphones on. #3 Choose your preferred playback setting and begin blasting your favorite tunes. #4 Connect your device to display song lyrics. Note: See the detailed “Usage Guide” section of this manual for more information on how to operate your machine.
20 21 How to connect to an external battery source How to set up the microphones To connect the machine to an external charging source such as your car battery, plug in a compatible cable to your car and into the DC12V Input on the machine. Make sure that each microphone is on a different frequency (CHA, CHB, or MHz) by pressing and holding the A-B button on the microphone handle. How to record audio Your frequency, channel, and battery level will display on the mic’s LED screen.
22 23 Remote Control How to use the power button on the machine’s remote control Press the power button to activate standby or “sleep” mode. Press it again to exit standby mode. Please note that the remote’s front and rear panels have sensors with a range of up to 13 feet and an angle of up to 60 degrees. The remote must be pointed at the machine in order to use it.
24 25 How to use SD mode Playing music from an SD card Plug your MicroSD card into the TF slot on the machine. Playback will begin immediately. Use operation instructions in the “Music” subsection below to adjust settings. How to use AUX Mode To use AUX mode, plug the AUX or AUX-RCA cable into the AUX input on the machine and plug the other end into the AUX input on your device. Next, press the Mode button on the machine until LINE appears on the display screen, indicating that you are now in AUX mode.
26 27 When things go flat Troubleshooting Problem Solution Battery icon on the microphone screen is blinking The microphone battery is low or depleted. OR Charge before use. Check that the volume on both the machine and audio source is raised. Bluetooth is connected but no sound is coming from the machine Microphone will not turn on Machine will not turn on The battery is depleted. Be sure to charge the machine after each use.
We’re here for you. If you encounter any issues with your machine or have any questions or comments, please feel free to contact us. Have your warranty information on hand for faster service. 90-DAY LIMITED WARRANTY 844-AMA-SING(262-7464) support@amasing.net www.amasing.