Installation Guide

Travisano Bernini Mosaic
tile shown in grid pattern
Installation of
MOSAIC GLASS
& STONE
INSTALLATION INSTRUCTIONS | GLASS & STONE MOSAIC | PAGE 2 OF 5
• It is recommended to use
a drill bit that is specially
designed for glass, metal
and stone.
NOTE: The tile must be
securely clamped into place to
prevent movement of the tile
during the drilling process.
• When drilling the hole, keep
the bit and hole lubricated
to prevent chipping.
• Drill from both sides of the
tile, starting with the back
and drilling half of the depth
of the tile.
• Turn the tile over and
complete the hole. This will
prevent the glass, metal and
stone from chipping as the
drill bit exits the tile.
• It is recommended
to use a diamond
blade, as blades
designed for
ceramic tile will
chip the stone
and/or glass.
NOTE: Cut edges
should be placed in
corners where they
can be hidden.
STEP 4: CUTTING
4
STEP 5: DRILLING
5
CONTINUED ON NEXT PAGE